[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8d973da8-df40-e37e-377f-50666db382fe@pengutronix.de>
Date: Tue, 2 Jan 2018 17:15:57 +0100
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: Faiz Abbas <faiz_abbas@...com>, wg@...ndegger.com,
robh+dt@...nel.org, mark.rutland@....com
Cc: linux-can@...r.kernel.org, netdev@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
nsekhar@...com, fcooper@...com, robh@...nel.org,
Wenyou.Yang@...rochip.com, sergei.shtylyov@...entembedded.com
Subject: Re: [PATCH v6 1/6] can: dev: Add support for limiting configured
bitrate
On 12/22/2017 02:31 PM, Faiz Abbas wrote:
> From: Franklin S Cooper Jr <fcooper@...com>
>
> Various CAN or CAN-FD IP may be able to run at a faster rate than
> what the transceiver the CAN node is connected to. This can lead to
> unexpected errors. However, CAN transceivers typically have fixed
> limitations and provide no means to discover these limitations at
> runtime. Therefore, add support for a can-transceiver node that
> can be reused by other CAN peripheral drivers to determine for both
> CAN and CAN-FD what the max bitrate that can be used. If the user
> tries to configure CAN to pass these maximum bitrates it will throw
> an error.
Please add support to read the maximum bitrate via netlink. Have a look
at 12a6075cabc0 ("can: dev: add CAN interface termination API"). I think
you need to extend the following functions: can_get_size() and
can_fill_info().
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists