| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <E1eWKHa-0003j2-Kd@rmk-PC.armlinux.org.uk>
Date: Tue, 02 Jan 2018 10:58:58 +0000
From: Russell King <rmk+kernel@...linux.org.uk>
To: Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>
Cc: netdev@...r.kernel.org
Subject: [PATCH net-next v2 7/7] net: phy: convert read-modify-write to
phy_modify()
Convert read-modify-write sequences in at803x, Marvell and core phylib
to use phy_modify() to ensure safety.
Signed-off-by: Russell King <rmk+kernel@...linux.org.uk>
---
drivers/net/phy/at803x.c | 20 ++--------
drivers/net/phy/marvell.c | 88 +++++++++++++++++---------------------------
drivers/net/phy/phy_device.c | 50 +++++--------------------
3 files changed, 46 insertions(+), 112 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index e911e4990b20..e86c1b8b1b51 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -216,34 +216,22 @@ static int at803x_suspend(struct phy_device *phydev)
int value;
int wol_enabled;
- mutex_lock(&phydev->lock);
-
value = phy_read(phydev, AT803X_INTR_ENABLE);
wol_enabled = value & AT803X_INTR_ENABLE_WOL;
- value = phy_read(phydev, MII_BMCR);
-
if (wol_enabled)
- value |= BMCR_ISOLATE;
+ value = BMCR_ISOLATE;
else
- value |= BMCR_PDOWN;
+ value = BMCR_PDOWN;
- phy_write(phydev, MII_BMCR, value);
-
- mutex_unlock(&phydev->lock);
+ phy_modify(phydev, MII_BMCR, 0, value);
return 0;
}
static int at803x_resume(struct phy_device *phydev)
{
- int value;
-
- value = phy_read(phydev, MII_BMCR);
- value &= ~(BMCR_PDOWN | BMCR_ISOLATE);
- phy_write(phydev, MII_BMCR, value);
-
- return 0;
+ return phy_modify(phydev, MII_BMCR, ~(BMCR_PDOWN | BMCR_ISOLATE), 0);
}
static int at803x_probe(struct phy_device *phydev)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 1cb84064d658..8212c2fd7fe1 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -471,7 +471,7 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
if (phy_interface_is_rgmii(phydev)) {
err = m88e1121_config_aneg_rgmii_delays(phydev);
- if (err)
+ if (err < 0)
return err;
}
@@ -664,19 +664,14 @@ static int m88e1116r_config_init(struct phy_device *phydev)
static int m88e3016_config_init(struct phy_device *phydev)
{
- int reg;
+ int ret;
/* Enable Scrambler and Auto-Crossover */
- reg = phy_read(phydev, MII_88E3016_PHY_SPEC_CTRL);
- if (reg < 0)
- return reg;
-
- reg &= ~MII_88E3016_DISABLE_SCRAMBLER;
- reg |= MII_88E3016_AUTO_MDIX_CROSSOVER;
-
- reg = phy_write(phydev, MII_88E3016_PHY_SPEC_CTRL, reg);
- if (reg < 0)
- return reg;
+ ret = phy_modify(phydev, MII_88E3016_PHY_SPEC_CTRL,
+ ~MII_88E3016_DISABLE_SCRAMBLER,
+ MII_88E3016_AUTO_MDIX_CROSSOVER);
+ if (ret < 0)
+ return ret;
return marvell_config_init(phydev);
}
@@ -685,42 +680,34 @@ static int m88e1111_config_init_hwcfg_mode(struct phy_device *phydev,
u16 mode,
int fibre_copper_auto)
{
- int temp;
-
- temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
- if (temp < 0)
- return temp;
-
- temp &= ~(MII_M1111_HWCFG_MODE_MASK |
- MII_M1111_HWCFG_FIBER_COPPER_AUTO |
- MII_M1111_HWCFG_FIBER_COPPER_RES);
- temp |= mode;
-
if (fibre_copper_auto)
- temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
+ mode |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
- return phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
+ return phy_modify(phydev, MII_M1111_PHY_EXT_SR,
+ (u16)~(MII_M1111_HWCFG_MODE_MASK |
+ MII_M1111_HWCFG_FIBER_COPPER_AUTO |
+ MII_M1111_HWCFG_FIBER_COPPER_RES),
+ mode);
}
static int m88e1111_config_init_rgmii_delays(struct phy_device *phydev)
{
- int temp;
-
- temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
- if (temp < 0)
- return temp;
+ int delay;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
- temp |= (MII_M1111_RGMII_RX_DELAY | MII_M1111_RGMII_TX_DELAY);
+ delay = MII_M1111_RGMII_RX_DELAY | MII_M1111_RGMII_TX_DELAY;
} else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
- temp &= ~MII_M1111_RGMII_TX_DELAY;
- temp |= MII_M1111_RGMII_RX_DELAY;
+ delay = MII_M1111_RGMII_RX_DELAY;
} else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
- temp &= ~MII_M1111_RGMII_RX_DELAY;
- temp |= MII_M1111_RGMII_TX_DELAY;
+ delay = MII_M1111_RGMII_TX_DELAY;
+ } else {
+ delay = 0;
}
- return phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
+ return phy_modify(phydev, MII_M1111_PHY_EXT_CR,
+ (u16)~(MII_M1111_RGMII_RX_DELAY |
+ MII_M1111_RGMII_TX_DELAY),
+ delay);
}
static int m88e1111_config_init_rgmii(struct phy_device *phydev)
@@ -766,7 +753,7 @@ static int m88e1111_config_init_rtbi(struct phy_device *phydev)
int err;
err = m88e1111_config_init_rgmii_delays(phydev);
- if (err)
+ if (err < 0)
return err;
err = m88e1111_config_init_hwcfg_mode(
@@ -793,7 +780,7 @@ static int m88e1111_config_init(struct phy_device *phydev)
if (phy_interface_is_rgmii(phydev)) {
err = m88e1111_config_init_rgmii(phydev);
- if (err)
+ if (err < 0)
return err;
}
@@ -834,7 +821,6 @@ static int m88e1121_config_init(struct phy_device *phydev)
static int m88e1510_config_init(struct phy_device *phydev)
{
int err;
- int temp;
/* SGMII-to-Copper mode initialization */
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
@@ -846,16 +832,15 @@ static int m88e1510_config_init(struct phy_device *phydev)
return err;
/* In reg 20, write MODE[2:0] = 0x1 (SGMII to Copper) */
- temp = phy_read(phydev, MII_88E1510_GEN_CTRL_REG_1);
- temp &= ~MII_88E1510_GEN_CTRL_REG_1_MODE_MASK;
- temp |= MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII;
- err = phy_write(phydev, MII_88E1510_GEN_CTRL_REG_1, temp);
+ err = phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1,
+ ~MII_88E1510_GEN_CTRL_REG_1_MODE_MASK,
+ MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII);
if (err < 0)
return err;
/* PHY reset is necessary after changing MODE[2:0] */
- temp |= MII_88E1510_GEN_CTRL_REG_1_RESET;
- err = phy_write(phydev, MII_88E1510_GEN_CTRL_REG_1, temp);
+ err = phy_modify(phydev, MII_88E1510_GEN_CTRL_REG_1, 0,
+ MII_88E1510_GEN_CTRL_REG_1_RESET);
if (err < 0)
return err;
@@ -961,7 +946,6 @@ static int m88e1149_config_init(struct phy_device *phydev)
static int m88e1145_config_init_rgmii(struct phy_device *phydev)
{
- int temp;
int err;
err = m88e1111_config_init_rgmii_delays(phydev);
@@ -973,15 +957,9 @@ static int m88e1145_config_init_rgmii(struct phy_device *phydev)
if (err < 0)
return err;
- temp = phy_read(phydev, 0x1e);
- if (temp < 0)
- return temp;
-
- temp &= 0xf03f;
- temp |= 2 << 9; /* 36 ohm */
- temp |= 2 << 6; /* 39 ohm */
-
- err = phy_write(phydev, 0x1e, temp);
+ err = phy_modify(phydev, 0x1e, 0xf03f,
+ 2 << 9 | /* 36 ohm */
+ 2 << 6); /* 39 ohm */
if (err < 0)
return err;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index b15b31ca2618..e5ddc5ae56d1 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1328,9 +1328,8 @@ static int genphy_config_eee_advert(struct phy_device *phydev)
*/
int genphy_setup_forced(struct phy_device *phydev)
{
- int ctl = phy_read(phydev, MII_BMCR);
+ u16 ctl = 0;
- ctl &= BMCR_LOOPBACK | BMCR_ISOLATE | BMCR_PDOWN;
phydev->pause = 0;
phydev->asym_pause = 0;
@@ -1342,7 +1341,8 @@ int genphy_setup_forced(struct phy_device *phydev)
if (DUPLEX_FULL == phydev->duplex)
ctl |= BMCR_FULLDPLX;
- return phy_write(phydev, MII_BMCR, ctl);
+ return phy_modify(phydev, MII_BMCR,
+ BMCR_LOOPBACK | BMCR_ISOLATE | BMCR_PDOWN, ctl);
}
EXPORT_SYMBOL(genphy_setup_forced);
@@ -1352,17 +1352,9 @@ EXPORT_SYMBOL(genphy_setup_forced);
*/
int genphy_restart_aneg(struct phy_device *phydev)
{
- int ctl = phy_read(phydev, MII_BMCR);
-
- if (ctl < 0)
- return ctl;
-
- ctl |= BMCR_ANENABLE | BMCR_ANRESTART;
-
/* Don't isolate the PHY if we're negotiating */
- ctl &= ~BMCR_ISOLATE;
-
- return phy_write(phydev, MII_BMCR, ctl);
+ return phy_modify(phydev, MII_BMCR, ~BMCR_ISOLATE,
+ BMCR_ANENABLE | BMCR_ANRESTART);
}
EXPORT_SYMBOL(genphy_restart_aneg);
@@ -1628,44 +1620,20 @@ EXPORT_SYMBOL(genphy_config_init);
int genphy_suspend(struct phy_device *phydev)
{
- int value;
-
- mutex_lock(&phydev->lock);
-
- value = phy_read(phydev, MII_BMCR);
- phy_write(phydev, MII_BMCR, value | BMCR_PDOWN);
-
- mutex_unlock(&phydev->lock);
-
- return 0;
+ return phy_modify(phydev, MII_BMCR, 0, BMCR_PDOWN);
}
EXPORT_SYMBOL(genphy_suspend);
int genphy_resume(struct phy_device *phydev)
{
- int value;
-
- value = phy_read(phydev, MII_BMCR);
- phy_write(phydev, MII_BMCR, value & ~BMCR_PDOWN);
-
- return 0;
+ return phy_modify(phydev, MII_BMCR, ~BMCR_PDOWN, 0);
}
EXPORT_SYMBOL(genphy_resume);
int genphy_loopback(struct phy_device *phydev, bool enable)
{
- int value;
-
- value = phy_read(phydev, MII_BMCR);
- if (value < 0)
- return value;
-
- if (enable)
- value |= BMCR_LOOPBACK;
- else
- value &= ~BMCR_LOOPBACK;
-
- return phy_write(phydev, MII_BMCR, value);
+ return phy_modify(phydev, MII_BMCR, ~BMCR_LOOPBACK,
+ enable ? BMCR_LOOPBACK : 0);
}
EXPORT_SYMBOL(genphy_loopback);
--
2.7.4
Powered by blists - more mailing lists