netdev - RE: [EXT] Re: [PATCH net-next 5/6] arm64: dts: marvell: mcbin: enable the fourth network interface

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <0e95e9b20e2d42bc95e04034bd88e781@IL-EXCH01.marvell.com>
Date:   Wed, 3 Jan 2018 17:00:47 +0000
From:   Stefan Chulski <stefanc@...vell.com>
To:     Russell King - ARM Linux <linux@...linux.org.uk>
CC:     Marcin Wojtas <mw@...ihalf.com>,
        Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
        Andrew Lunn <andrew@...n.ch>,
        "Florian Fainelli" <f.fainelli@...il.com>,
        Yan Markman <ymarkman@...vell.com>,
        "Jason Cooper" <jason@...edaemon.net>,
        netdev <netdev@...r.kernel.org>,
        "Antoine Tenart" <antoine.tenart@...e-electrons.com>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "kishon@...com" <kishon@...com>, Nadav Haklai <nadavh@...vell.com>,
        Miquèl Raynal <miquel.raynal@...e-electrons.com>,
        Gregory Clément 
        <gregory.clement@...e-electrons.com>,
        "David S. Miller" <davem@...emloft.net>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
Subject: RE: [EXT] Re: [PATCH net-next 5/6] arm64: dts: marvell: mcbin: enable
 the fourth network interface

> > > -----Original Message-----
> > > Hi Russell,
> > >
> > > Indeed. RGMII MAC behaves same way, although it shouldn't be named
> > > as 'in- band' to be on par with the specifications. Anyway - this
> > > one is rather a stub for being able to work with ACPI, so once the
> > > MDIO bus works there, this will be out of any concerns.
> >
> > Hi Marcin,
> >
> > This is correct.
> > "in-band" supported only for SGMII mode.
> > IRQ link interrupt depend on "in-band"' auto negation only if "in-band"'
> enabled.
> > But IRQ link interrupt could be triggered with "in-band", "out-band" or with
> specific fixed speed/duplex/flow_contol.
> 
> Hi Stefan,
> 
> How does this work in RGMII mode - is this handled by the PP2 polling the PHY
> to get the speed, duplex and flow control settings?
> 

IRQ interrupt doesn't handled speed, duplex and flow control settings.
It's just raised if number of criterions met:
1) Physical signal detected by MAC
2) MAC auto negotiation succeeded(valid only auto negotiation enabled in MAC and "in-band" bypass disabled)

So if auto negotiation mechanism disabled in MAC or bypassed, link status would changes to up and IRQ interrupt be triggered.

In case of RGMII mode obviously we don't have "in-band" auto negotiation and "out-band" cannot be used in Kernel(due to missed locks).
So auto negotiation should be disabled on MAC level and speed/duplex/flow_contol would be negotiate by PHY. 
phylink/phylib infrastructure should provide speed/duplex/flow_contol(that were agreed between PHY's) to ppv2 driver.

Stefan.