After the Ether platform data is fixed, the driver probe() method would still fail since the 'struct sh_eth_cpu_data' corresponding to SH771x indicates the presence of TSU but the memory resource for it is absent. Add the missing TSU resource to both Ether devices and fix the harmless off-by-one error in the main memory resources, while at it... Fixes: 4986b996882d ("net: sh_eth: remove the SH_TSU_ADDR") Signed-off-by: Sergei Shtylyov --- arch/sh/boards/mach-se/770x/setup.c | 14 ++++++++++++-- arch/sh/include/mach-se/mach/se.h | 1 + 2 files changed, 13 insertions(+), 2 deletions(-) Index: linux/arch/sh/boards/mach-se/770x/setup.c =================================================================== --- linux.orig/arch/sh/boards/mach-se/770x/setup.c +++ linux/arch/sh/boards/mach-se/770x/setup.c @@ -123,10 +123,15 @@ static struct sh_eth_plat_data sh_eth_pl static struct resource sh_eth0_resources[] = { [0] = { .start = SH_ETH0_BASE, - .end = SH_ETH0_BASE + 0x1B8, + .end = SH_ETH0_BASE + 0x1B8 - 1, .flags = IORESOURCE_MEM, }, [1] = { + .start = SH_TSU_BASE, + .end = SH_TSU_BASE + 0xA00 - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { .start = SH_ETH0_IRQ, .end = SH_ETH0_IRQ, .flags = IORESOURCE_IRQ, @@ -146,10 +151,15 @@ static struct platform_device sh_eth0_de static struct resource sh_eth1_resources[] = { [0] = { .start = SH_ETH1_BASE, - .end = SH_ETH1_BASE + 0x1B8, + .end = SH_ETH1_BASE + 0x1B8 - 1, .flags = IORESOURCE_MEM, }, [1] = { + .start = SH_TSU_BASE, + .end = SH_TSU_BASE + 0xA00 - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { .start = SH_ETH1_IRQ, .end = SH_ETH1_IRQ, .flags = IORESOURCE_IRQ, Index: linux/arch/sh/include/mach-se/mach/se.h =================================================================== --- linux.orig/arch/sh/include/mach-se/mach/se.h +++ linux/arch/sh/include/mach-se/mach/se.h @@ -100,6 +100,7 @@ /* Base address */ #define SH_ETH0_BASE 0xA7000000 #define SH_ETH1_BASE 0xA7000400 +#define SH_TSU_BASE 0xA7000800 /* PHY ID */ #if defined(CONFIG_CPU_SUBTYPE_SH7710) # define PHY_ID 0x00