lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Fri, 05 Jan 2018 18:05:23 -0700
From:   Subash Abhinov Kasiviswanathan <subashab@...eaurora.org>
To:     davem@...emloft.net, netdev@...r.kernel.org, lkp@...el.com,
        edumazet@...gle.com
Subject: Re: [PATCH net-next v3 00/10] net: qualcomm: rmnet: Enable csum
 offloads

On 2018-01-05 13:41, Subash Abhinov Kasiviswanathan wrote:
> This series introduces the MAPv4 packet format for checksum
> offload plus some other minor changes.
> 
> Patches 1-3 are cleanups.
> 
> Patch 4 renames the ingress format to data format so that all data
> formats can be configured using this going forward.
> 
> Patch 5 uses the pacing helper to improve TCP transmit performance.
> 
> Patch 6-9 defines the the MAPv4 for checksum offload for RX and TX.
> A new header and trailer format are used as part of MAPv4.
> For RX checksum offload, only the 1's complement of the IP payload
> portion is computed by hardware. The meta data from RX header is
> used to verify the checksum field in the packet. Note that the
> IP packet and its field itself is not modified by hardware.
> This gives metadata to help with the RX checksum. For TX, the
> required metadata is filled up so hardware can compute the
> checksum.
> 
> Patch 10 enables GSO on rmnet devices
> 
> v1->v2: Fix sparse errors reported by kbuild test robot
> 
> v2->v3: Update the commit message for Patch 5 based on Eric's comments
> 
> Subash Abhinov Kasiviswanathan (10):
>   net: qualcomm: rmnet: Remove redundant check when stamping map header
>   net: qualcomm: rmnet: Remove invalid condition while stamping mux id
>   net: qualcomm: rmnet: Remove unused function declaration
>   net: qualcomm: rmnet: Rename ingress data format to data format
>   net: qualcomm: rmnet: Set pacing shift
>   net: qualcomm: rmnet: Define the MAPv4 packet formats
>   net: qualcomm: rmnet: Add support for RX checksum offload
>   net: qualcomm: rmnet: Handle command packets with checksum trailer
>   net: qualcomm: rmnet: Add support for TX checksum offload
>   net: qualcomm: rmnet: Add support for GSO
> 
>  drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c |  10 +-
>  drivers/net/ethernet/qualcomm/rmnet/rmnet_config.h |   2 +-
>  .../net/ethernet/qualcomm/rmnet/rmnet_handlers.c   |  36 ++-
>  drivers/net/ethernet/qualcomm/rmnet/rmnet_map.h    |  23 +-
>  .../ethernet/qualcomm/rmnet/rmnet_map_command.c    |  17 +-
>  .../net/ethernet/qualcomm/rmnet/rmnet_map_data.c   | 309 
> ++++++++++++++++++++-
>  .../net/ethernet/qualcomm/rmnet/rmnet_private.h    |   2 +
>  drivers/net/ethernet/qualcomm/rmnet/rmnet_vnd.c    |   4 +
>  8 files changed, 378 insertions(+), 25 deletions(-)

Hi David

I dont see this series in patchwork.
Do I need to resubmit this?

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ