[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1515581725-29242-6-git-send-email-faiz_abbas@ti.com>
Date: Wed, 10 Jan 2018 16:25:22 +0530
From: Faiz Abbas <faiz_abbas@...com>
To: <wg@...ndegger.com>, <mkl@...gutronix.de>, <robh+dt@...nel.org>,
<mark.rutland@....com>
CC: <linux-can@...r.kernel.org>, <netdev@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<faiz_abbas@...com>, <nsekhar@...com>, <fcooper@...com>,
<robh@...nel.org>, <Wenyou.Yang@...rochip.com>,
<sergei.shtylyov@...entembedded.com>, <linux-omap@...r.kernel.org>,
<b29396@...escale.com>
Subject: [PATCH v7 5/8] can: m_can: Add PM Support
From: Franklin S Cooper Jr <fcooper@...com>
Add support for CONFIG_PM which is the new way to handle managing clocks.
Move the clock management to pm_runtime_resume() and pm_runtime_suspend()
callbacks for the driver.
CONFIG_PM is required by OMAP based devices to handle clock management.
Therefore, this allows future Texas Instruments SoCs that have the MCAN IP
to work with this driver.
Reviewed-by: Suman Anna <s-anna@...com>
Signed-off-by: Franklin S Cooper Jr <fcooper@...com>
[nsekhar@...com: handle pm_runtime_get_sync() failure, fix some bugs]
Signed-off-by: Sekhar Nori <nsekhar@...com>
Signed-off-by: Faiz Abbas <faiz_abbas@...com>
---
drivers/net/can/m_can/m_can.c | 95 ++++++++++++++++++++++++++++---------------
1 file changed, 62 insertions(+), 33 deletions(-)
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index 07ebe7f..f5c5028 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -23,6 +23,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/iopoll.h>
#include <linux/can/dev.h>
@@ -625,21 +626,16 @@ static int m_can_clk_start(struct m_can_priv *priv)
{
int err;
- err = clk_prepare_enable(priv->hclk);
- if (err)
- return err;
-
- err = clk_prepare_enable(priv->cclk);
+ err = pm_runtime_get_sync(priv->device);
if (err)
- clk_disable_unprepare(priv->hclk);
+ pm_runtime_put_noidle(priv->device);
return err;
}
static void m_can_clk_stop(struct m_can_priv *priv)
{
- clk_disable_unprepare(priv->cclk);
- clk_disable_unprepare(priv->hclk);
+ pm_runtime_put_sync(priv->device);
}
static int m_can_get_berr_counter(const struct net_device *dev,
@@ -1561,37 +1557,26 @@ static int m_can_plat_probe(struct platform_device *pdev)
goto failed_ret;
}
- /* Enable clocks. Necessary to read Core Release in order to determine
- * M_CAN version
- */
- ret = clk_prepare_enable(hclk);
- if (ret)
- goto disable_hclk_ret;
-
- ret = clk_prepare_enable(cclk);
- if (ret)
- goto disable_cclk_ret;
-
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
addr = devm_ioremap_resource(&pdev->dev, res);
irq = platform_get_irq_byname(pdev, "int0");
if (IS_ERR(addr) || irq < 0) {
ret = -EINVAL;
- goto disable_cclk_ret;
+ goto failed_ret;
}
/* message ram could be shared */
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
if (!res) {
ret = -ENODEV;
- goto disable_cclk_ret;
+ goto failed_ret;
}
mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
if (!mram_addr) {
ret = -ENOMEM;
- goto disable_cclk_ret;
+ goto failed_ret;
}
/* get message ram configuration */
@@ -1600,7 +1585,7 @@ static int m_can_plat_probe(struct platform_device *pdev)
sizeof(mram_config_vals) / 4);
if (ret) {
dev_err(&pdev->dev, "Could not get Message RAM configuration.");
- goto disable_cclk_ret;
+ goto failed_ret;
}
/* Get TX FIFO size
@@ -1612,13 +1597,9 @@ static int m_can_plat_probe(struct platform_device *pdev)
dev = alloc_candev(sizeof(*priv), tx_fifo_size);
if (!dev) {
ret = -ENOMEM;
- goto disable_cclk_ret;
+ goto failed_ret;
}
- ret = setup_m_can_dev(pdev, dev, addr);
- if (ret)
- goto disable_cclk_ret;
-
priv = netdev_priv(dev);
dev->irq = irq;
priv->device = &pdev->dev;
@@ -1632,6 +1613,20 @@ static int m_can_plat_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
+ /* Enable clocks. Necessary to read Core Release in order to determine
+ * M_CAN version
+ */
+ pm_runtime_enable(&pdev->dev);
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret) {
+ pm_runtime_put_noidle(&pdev->dev);
+ goto pm_runtime_fail;
+ }
+
+ ret = setup_m_can_dev(pdev, dev, addr);
+ if (ret)
+ goto pm_runtime_put;
+
ret = register_m_can_dev(dev);
if (ret) {
dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
@@ -1650,14 +1645,15 @@ static int m_can_plat_probe(struct platform_device *pdev)
* Stop clocks. They will be reactivated once the M_CAN device is opened
*/
- goto disable_cclk_ret;
+ goto pm_runtime_put;
failed_free_dev:
free_m_can_dev(dev);
-disable_cclk_ret:
- clk_disable_unprepare(cclk);
-disable_hclk_ret:
- clk_disable_unprepare(hclk);
+pm_runtime_put:
+ pm_runtime_put_sync(&pdev->dev);
+pm_runtime_fail:
+ if (ret)
+ pm_runtime_disable(&pdev->dev);
failed_ret:
return ret;
}
@@ -1715,6 +1711,9 @@ static int m_can_plat_remove(struct platform_device *pdev)
struct net_device *dev = platform_get_drvdata(pdev);
unregister_m_can_dev(dev);
+
+ pm_runtime_disable(&pdev->dev);
+
platform_set_drvdata(pdev, NULL);
free_m_can_dev(dev);
@@ -1722,7 +1721,37 @@ static int m_can_plat_remove(struct platform_device *pdev)
return 0;
}
+int m_can_runtime_suspend(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct m_can_priv *priv = netdev_priv(ndev);
+
+ clk_disable_unprepare(priv->cclk);
+ clk_disable_unprepare(priv->hclk);
+
+ return 0;
+}
+
+int m_can_runtime_resume(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct m_can_priv *priv = netdev_priv(ndev);
+ int err;
+
+ err = clk_prepare_enable(priv->hclk);
+ if (err)
+ return err;
+
+ err = clk_prepare_enable(priv->cclk);
+ if (err)
+ clk_disable_unprepare(priv->hclk);
+
+ return err;
+}
+
static const struct dev_pm_ops m_can_pmops = {
+ SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
+ m_can_runtime_resume, NULL)
SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
};
--
2.7.4
Powered by blists - more mailing lists