netdev - [PATCH net-next v2] ibmvnic: Don't handle RX interrupts when not up.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <151560234166.18701.728262528717536376.stgit@ltcalpine2-lp14.aus.stglabs.ibm.com>
Date:   Wed, 10 Jan 2018 10:40:09 -0600
From:   Nathan Fontenot <nfont@...ux.vnet.ibm.com>
To:     netdev@...r.kernel.org
Cc:     jallen@...ux.vnet.ibm.com, tlfalcon@...ux.vnet.ibm.com
Subject: [PATCH net-next v2] ibmvnic: Don't handle RX interrupts when not up.

Initiating a kdump via the command line can cause a pending interrupt
to be handled by the ibmvnic driver when initializing the sub-CRQ
irqs during driver initialization.

NIP [d000000000ca34f0] ibmvnic_interrupt_rx+0x40/0xd0 [ibmvnic]
LR [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0
Call Trace:
[c000000047fcfde0] [c000000008132ef0] __handle_irq_event_percpu+0xa0/0x2f0
[c000000047fcfea0] [c00000000813317c] handle_irq_event_percpu+0x3c/0x90
[c000000047fcfee0] [c00000000813323c] handle_irq_event+0x6c/0xd0
[c000000047fcff10] [c0000000081385e0] handle_fasteoi_irq+0xf0/0x250
[c000000047fcff40] [c0000000081320a0] generic_handle_irq+0x50/0x80
[c000000047fcff60] [c000000008014984] __do_irq+0x84/0x1d0
[c000000047fcff90] [c000000008027564] call_do_irq+0x14/0x24
[c00000003c92af00] [c000000008014b70] do_IRQ+0xa0/0x120
[c00000003c92af50] [c000000008002594] hardware_interrupt_common+0x114/0x180
--- interrupt: 501 at arch_local_irq_restore+0x74/0x90
    LR = arch_local_irq_restore+0x74/0x90
[c00000003c92b240] [c000000008138a20] irq_startup+0xa0/0xe0 (unreliable)
[c00000003c92b260] [c0000000087fc440] _raw_spin_unlock_irqrestore+0x40/0x70
[c00000003c92b280] [c0000000081361f4] __setup_irq+0x584/0x7a0
[c00000003c92b420] [c0000000081366a0] request_threaded_irq+0x140/0x290
[c00000003c92b480] [d000000000ca3754] init_sub_crq_irqs+0x1d4/0x370 [ibmvnic]
[c00000003c92b520] [d000000000ca6b50] ibmvnic_init+0x140/0x760 [ibmvnic]
[c00000003c92b5c0] [d000000000ca7308] ibmvnic_probe+0x198/0x330 [ibmvnic]
[c00000003c92b650] [c000000008037270] vio_bus_probe+0x1c0/0x480
[c00000003c92b6f0] [c00000000859a140] driver_probe_device+0x1f0/0x540
[c00000003c92b780] [c00000000859a59c] __driver_attach+0x10c/0x110
[c00000003c92b7c0] [c000000008596dac] bus_for_each_dev+0x8c/0xf0
[c00000003c92b810] [c000000008599798] driver_attach+0x38/0x50
[c00000003c92b830] [c000000008598f68] bus_add_driver+0x2b8/0x380
[c00000003c92b8c0] [c00000000859b660] driver_register+0xa0/0x180
[c00000003c92b930] [c000000008035c5c] __vio_register_driver+0x7c/0xc0
[c00000003c92b9b0] [d000000000caaf3c] ibmvnic_module_init+0x5c/0x70 [ibmvnic]
[c00000003c92ba10] [c00000000800b6cc] do_one_initcall+0x12c/0x280
[c00000003c92bae0] [c000000008805614] do_init_module+0x98/0x24c
[c00000003c92bb70] [c000000008181a80] load_module+0x1470/0x16c0
[c00000003c92bd40] [c000000008181fb0] SyS_finit_module+0xd0/0x120
[c00000003c92be30] [c000000008009204] system_call+0x38/0xb4

At this point the driver is not prepared to handle traffic and
should not try to handle the interrupt. This patch adds a check to
ensure the driver is up when handling RX interrupts.

Signed-off-by: Nathan Fontenot <nfont@...ux.vnet.ibm.com>
---

v2 updates:
 - Correct commit message typos
 - Add comment and unlikely() to adapter status check

---
 drivers/net/ethernet/ibm/ibmvnic.c |    6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 6911b7cc06c5..461014b7ccdd 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -2453,6 +2453,12 @@ static irqreturn_t ibmvnic_interrupt_rx(int irq, void *instance)
 	struct ibmvnic_sub_crq_queue *scrq = instance;
 	struct ibmvnic_adapter *adapter = scrq->adapter;
 
+	/* When booting a kdump kernel we can hit pending interrupts
+	 * prior to completing driver initialization.
+	 */
+	if (unlikely(adapter->state != VNIC_OPEN))
+		return IRQ_NONE;
+
 	adapter->rx_stats_buffers[scrq->scrq_num].interrupts++;
 
 	if (napi_schedule_prep(&adapter->napi[scrq->scrq_num])) {