lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180115193722.10241-2-sebastian.reichel@collabora.co.uk>
Date:   Mon, 15 Jan 2018 20:37:18 +0100
From:   Sebastian Reichel <sebastian.reichel@...labora.co.uk>
To:     Andrew Lunn <andrew@...n.ch>,
        Vivien Didelot <vivien.didelot@...oirfairelinux.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <kernel@...gutronix.de>,
        Fabio Estevam <fabio.estevam@....com>
Cc:     Ian Ray <ian.ray@...com>, Nandor Han <nandor.han@...com>,
        Rob Herring <robh+dt@...nel.org>,
        "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Sebastian Reichel <sebastian.reichel@...labora.co.uk>
Subject: [PATCHv3 1/5] net: dsa: Support internal phy on 'cpu' port

This adds support for enabling the internal PHY for a 'cpu' port.
It has been tested on GE B850v3,  B650v3 and B450v3, which have a
built-in MV88E6240 switch connected to a PCIe based network card.
Without this patch the link does not come up and no traffic can be
routed through the switch.

The PHY interface, that is being used on the above test systems is
part of the MV88E6240 and since mv88e6xxx driver resets the chip
during probe, it is definitely disabled without this patch.

Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.co.uk>
---
 net/dsa/port.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/net/dsa/port.c b/net/dsa/port.c
index bb4be2679904..011ecd9b1be7 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -273,6 +273,55 @@ int dsa_port_vlan_del(struct dsa_port *dp,
 	return 0;
 }
 
+static int dsa_port_setup_phy_of(struct dsa_port *dp, bool enable)
+{
+	struct device_node *port_dn = dp->dn;
+	struct device_node *phy_dn;
+	struct dsa_switch *ds = dp->ds;
+	struct phy_device *phydev;
+	int port = dp->index;
+	int err = 0;
+
+	phy_dn = of_parse_phandle(port_dn, "phy-handle", 0);
+	if (!phy_dn)
+		return 0;
+
+	phydev = of_phy_find_device(phy_dn);
+	if (!phydev) {
+		err = -EPROBE_DEFER;
+		goto err_put_of;
+	}
+
+	if (enable) {
+		err = genphy_config_init(phydev);
+		if (err < 0)
+			goto err_put_dev;
+
+		err = genphy_resume(phydev);
+		if (err < 0)
+			goto err_put_dev;
+
+		err = genphy_read_status(phydev);
+		if (err < 0)
+			goto err_put_dev;
+	} else {
+		err = genphy_suspend(phydev);
+		if (err < 0)
+			goto err_put_dev;
+	}
+
+	if (ds->ops->adjust_link)
+		ds->ops->adjust_link(ds, port, phydev);
+
+	dev_dbg(ds->dev, "enabled port's phy: %s", phydev_name(phydev));
+
+err_put_dev:
+	put_device(&phydev->mdio.dev);
+err_put_of:
+	of_node_put(phy_dn);
+	return err;
+}
+
 int dsa_port_fixed_link_register_of(struct dsa_port *dp)
 {
 	struct device_node *dn = dp->dn;
@@ -305,6 +354,10 @@ int dsa_port_fixed_link_register_of(struct dsa_port *dp)
 			ds->ops->adjust_link(ds, port, phydev);
 
 		put_device(&phydev->mdio.dev);
+	} else {
+		err = dsa_port_setup_phy_of(dp, true);
+		if (err)
+			return err;
 	}
 
 	return 0;
@@ -316,4 +369,6 @@ void dsa_port_fixed_link_unregister_of(struct dsa_port *dp)
 
 	if (of_phy_is_fixed_link(dn))
 		of_phy_deregister_fixed_link(dn);
+	else
+		dsa_port_setup_phy_of(dp, false);
 }
-- 
2.15.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ