| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1517453282-27388-1-git-send-email-eswierk@skyportsystems.com>
Date: Wed, 31 Jan 2018 18:48:02 -0800
From: Ed Swierk <eswierk@...portsystems.com>
To: Pravin Shelar <pshelar@....org>,
David Miller <davem@...emloft.net>, netdev@...r.kernel.org,
ovs-dev@...nvswitch.org
Cc: Ed Swierk <eswierk@...portsystems.com>
Subject: [PATCH v4] openvswitch: Remove padding from packet before L3+ conntrack processing
IPv4 and IPv6 packets may arrive with lower-layer padding that is not
included in the L3 length. For example, a short IPv4 packet may have
up to 6 bytes of padding following the IP payload when received on an
Ethernet device with a minimum packet length of 64 bytes.
Higher-layer processing functions in netfilter (e.g. nf_ip_checksum(),
and help() in nf_conntrack_ftp) assume skb->len reflects the length of
the L3 header and payload, rather than referring back to
ip_hdr->tot_len or ipv6_hdr->payload_len, and get confused by
lower-layer padding.
In the normal IPv4 receive path, ip_rcv() trims the packet to
ip_hdr->tot_len before invoking netfilter hooks. In the IPv6 receive
path, ip6_rcv() does the same using ipv6_hdr->payload_len. Similarly
in the br_netfilter receive path, br_validate_ipv4() and
br_validate_ipv6() trim the packet to the L3 length before invoking
netfilter hooks.
Currently in the OVS conntrack receive path, ovs_ct_execute() pulls
the skb to the L3 header but does not trim it to the L3 length before
calling nf_conntrack_in(NF_INET_PRE_ROUTING). When
nf_conntrack_proto_tcp encounters a packet with lower-layer padding,
nf_ip_checksum() fails causing a "nf_ct_tcp: bad TCP checksum" log
message. While extra zero bytes don't affect the checksum, the length
in the IP pseudoheader does. That length is based on skb->len, and
without trimming, it doesn't match the length the sender used when
computing the checksum.
In ovs_ct_execute(), trim the skb to the L3 length before higher-layer
processing.
Signed-off-by: Ed Swierk <eswierk@...portsystems.com>
---
net/openvswitch/conntrack.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/net/openvswitch/conntrack.c b/net/openvswitch/conntrack.c
index d558e88..285f879 100644
--- a/net/openvswitch/conntrack.c
+++ b/net/openvswitch/conntrack.c
@@ -1097,6 +1097,36 @@ static int ovs_ct_commit(struct net *net, struct sw_flow_key *key,
return 0;
}
+/* Trim the skb to the length specified by the IP/IPv6 header,
+ * removing any trailing lower-layer padding. This prepares the skb
+ * for higher-layer processing that assumes skb->len excludes padding
+ * (such as nf_ip_checksum). The caller needs to pull the skb to the
+ * network header, and ensure ip_hdr/ipv6_hdr points to valid data.
+ */
+static int ovs_skb_network_trim(struct sk_buff *skb)
+{
+ unsigned int len;
+ int err;
+
+ switch (skb->protocol) {
+ case htons(ETH_P_IP):
+ len = ntohs(ip_hdr(skb)->tot_len);
+ break;
+ case htons(ETH_P_IPV6):
+ len = sizeof(struct ipv6hdr)
+ + ntohs(ipv6_hdr(skb)->payload_len);
+ break;
+ default:
+ len = skb->len;
+ }
+
+ err = pskb_trim_rcsum(skb, len);
+ if (err)
+ kfree_skb(skb);
+
+ return err;
+}
+
/* Returns 0 on success, -EINPROGRESS if 'skb' is stolen, or other nonzero
* value if 'skb' is freed.
*/
@@ -1111,6 +1141,10 @@ int ovs_ct_execute(struct net *net, struct sk_buff *skb,
nh_ofs = skb_network_offset(skb);
skb_pull_rcsum(skb, nh_ofs);
+ err = ovs_skb_network_trim(skb);
+ if (err)
+ return err;
+
if (key->ip.frag != OVS_FRAG_TYPE_NONE) {
err = handle_fragments(net, key, info->zone.id, skb);
if (err)
--
1.9.1
Powered by blists - more mailing lists