| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180214174539.11392-8-jeffrey.t.kirsher@intel.com>
Date: Wed, 14 Feb 2018 09:45:34 -0800
From: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To: davem@...emloft.net
Cc: Harshitha Ramamurthy <harshitha.ramamurthy@...el.com>,
netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com,
jogreene@...hat.com, Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 07/12] i40evf: Add support to configure bw via tc tool
From: Harshitha Ramamurthy <harshitha.ramamurthy@...el.com>
This patch adds support to configure bandwidth for the traffic
classes via tc tool. The required information is passed to the PF
which is used in the process of setting up the traffic classes.
Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@...el.com>
Tested-by: Andrew Bowers <andrewx.bowers@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
drivers/net/ethernet/intel/i40evf/i40evf.h | 1 +
drivers/net/ethernet/intel/i40evf/i40evf_main.c | 66 +++++++++++++++++++++-
.../net/ethernet/intel/i40evf/i40evf_virtchnl.c | 3 +
3 files changed, 67 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index c8d68c8d2c33..150d676ab87c 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -107,6 +107,7 @@ struct i40e_vsi {
#define I40EVF_HKEY_ARRAY_SIZE ((I40E_VFQF_HKEY_MAX_INDEX + 1) * 4)
#define I40EVF_HLUT_ARRAY_SIZE ((I40E_VFQF_HLUT_MAX_INDEX + 1) * 4)
+#define I40EVF_MBPS_DIVISOR 125000 /* divisor to convert to Mbps */
/* MAX_MSIX_Q_VECTORS of these are allocated,
* but we only use one per queue-specific vector.
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 8a26393459ef..2f677a2a4b5c 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2235,6 +2235,48 @@ void i40evf_free_all_rx_resources(struct i40evf_adapter *adapter)
i40evf_free_rx_resources(&adapter->rx_rings[i]);
}
+/**
+ * i40evf_validate_tx_bandwidth - validate the max Tx bandwidth
+ * @adapter: board private structure
+ * @max_tx_rate: max Tx bw for a tc
+ **/
+static int i40evf_validate_tx_bandwidth(struct i40evf_adapter *adapter,
+ u64 max_tx_rate)
+{
+ int speed = 0, ret = 0;
+
+ switch (adapter->link_speed) {
+ case I40E_LINK_SPEED_40GB:
+ speed = 40000;
+ break;
+ case I40E_LINK_SPEED_25GB:
+ speed = 25000;
+ break;
+ case I40E_LINK_SPEED_20GB:
+ speed = 20000;
+ break;
+ case I40E_LINK_SPEED_10GB:
+ speed = 10000;
+ break;
+ case I40E_LINK_SPEED_1GB:
+ speed = 1000;
+ break;
+ case I40E_LINK_SPEED_100MB:
+ speed = 100;
+ break;
+ default:
+ break;
+ }
+
+ if (max_tx_rate > speed) {
+ dev_err(&adapter->pdev->dev,
+ "Invalid tx rate specified\n");
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
/**
* i40evf_validate_channel_config - validate queue mapping info
* @adapter: board private structure
@@ -2247,7 +2289,10 @@ void i40evf_free_all_rx_resources(struct i40evf_adapter *adapter)
static int i40evf_validate_ch_config(struct i40evf_adapter *adapter,
struct tc_mqprio_qopt_offload *mqprio_qopt)
{
+ u64 total_max_rate = 0;
int i, num_qps = 0;
+ u64 tx_rate = 0;
+ int ret = 0;
if (mqprio_qopt->qopt.num_tc > I40EVF_MAX_TRAFFIC_CLASS ||
mqprio_qopt->qopt.num_tc < 1)
@@ -2255,16 +2300,24 @@ static int i40evf_validate_ch_config(struct i40evf_adapter *adapter,
for (i = 0; i <= mqprio_qopt->qopt.num_tc - 1; i++) {
if (!mqprio_qopt->qopt.count[i] ||
- mqprio_qopt->min_rate[i] ||
- mqprio_qopt->max_rate[i] ||
mqprio_qopt->qopt.offset[i] != num_qps)
return -EINVAL;
+ if (mqprio_qopt->min_rate[i]) {
+ dev_err(&adapter->pdev->dev,
+ "Invalid min tx rate (greater than 0) specified\n");
+ return -EINVAL;
+ }
+ /*convert to Mbps */
+ tx_rate = div_u64(mqprio_qopt->max_rate[i],
+ I40EVF_MBPS_DIVISOR);
+ total_max_rate += tx_rate;
num_qps += mqprio_qopt->qopt.count[i];
}
if (num_qps > MAX_QUEUES)
return -EINVAL;
- return 0;
+ ret = i40evf_validate_tx_bandwidth(adapter, total_max_rate);
+ return ret;
}
/**
@@ -2285,6 +2338,7 @@ static int __i40evf_setup_tc(struct net_device *netdev, void *type_data)
struct virtchnl_vf_resource *vfres = adapter->vf_res;
u8 num_tc = 0, total_qps = 0;
int ret = 0, netdev_tc = 0;
+ u64 max_tx_rate;
u16 mode;
int i;
@@ -2332,6 +2386,12 @@ static int __i40evf_setup_tc(struct net_device *netdev, void *type_data)
adapter->ch_config.ch_info[i].offset =
mqprio_qopt->qopt.offset[i];
total_qps += mqprio_qopt->qopt.count[i];
+ max_tx_rate = mqprio_qopt->max_rate[i];
+ /* convert to Mbps */
+ max_tx_rate = div_u64(max_tx_rate,
+ I40EVF_MBPS_DIVISOR);
+ adapter->ch_config.ch_info[i].max_tx_rate =
+ max_tx_rate;
} else {
adapter->ch_config.ch_info[i].count = 1;
adapter->ch_config.ch_info[i].offset = 0;
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
index f6c56141b4fe..647ea104d435 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
@@ -1003,6 +1003,9 @@ void i40evf_enable_channels(struct i40evf_adapter *adapter)
for (i = 0; i < vti->num_tc; i++) {
vti->list[i].count = adapter->ch_config.ch_info[i].count;
vti->list[i].offset = adapter->ch_config.ch_info[i].offset;
+ vti->list[i].pad = 0;
+ vti->list[i].max_tx_rate =
+ adapter->ch_config.ch_info[i].max_tx_rate;
}
adapter->ch_config.state = __I40EVF_TC_RUNNING;
--
2.14.3
Powered by blists - more mailing lists