netdev - [PATCH v5 00/14] net: pch_gbe: Fixes & MIPS support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180217201037.3006-1-paul.burton@mips.com>
Date:   Sat, 17 Feb 2018 12:10:23 -0800
From:   Paul Burton <paul.burton@...s.com>
To:     <netdev@...r.kernel.org>
CC:     Hassan Naveed <hassan.naveed@...s.com>,
        Matt Redfearn <matt.redfearn@...s.com>,
        "David S . Miller" <davem@...emloft.net>,
        <linux-mips@...ux-mips.org>, Paul Burton <paul.burton@...s.com>
Subject: [PATCH v5 00/14] net: pch_gbe: Fixes & MIPS support

The Intel EG20T Platform Controller Hub is used on the MIPS Boston
development board to provide various peripherals including ethernet.
This series fixes some issues with the pch_gbe driver discovered whilst
in use on the Boston board, and implements support for device tree which
we use to provide the PHY reset GPIO.

Applies atop v4.16-rc1.

Hassan Naveed (1):
  net: pch_gbe: Fix TX RX descriptor accesses for big endian systems

Paul Burton (13):
  net: pch_gbe: Mark Minnow PHY reset GPIO active low
  net: pch_gbe: Pull PHY GPIO handling out of Minnow code
  dt-bindings: net: Document Intel pch_gbe binding
  net: pch_gbe: Add device tree support
  net: pch_gbe: Always reset PHY along with MAC
  net: pch_gbe: Allow longer for resets
  net: pch_gbe: Fix handling of TX padding
  net: pch_gbe: Fold pch_gbe_setup_[rt]ctl into pch_gbe_configure_[rt]x
  net: pch_gbe: Use pch_gbe_disable_dma_rx() in pch_gbe_configure_rx()
  net: pch_gbe: Disable TX DMA whilst configuring descriptors
  net: pch_gbe: Ensure DMA is ordered with descriptor writes
  ptp: pch: Allow build on MIPS platforms
  net: pch_gbe: Allow build on MIPS platforms

 Documentation/devicetree/bindings/net/pch_gbe.txt  |  25 ++
 drivers/net/ethernet/oki-semi/pch_gbe/Kconfig      |   2 +-
 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h    |  27 +-
 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c   | 283 ++++++++++++---------
 drivers/ptp/Kconfig                                |   2 +-
 5 files changed, 204 insertions(+), 135 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/pch_gbe.txt

-- 
2.16.1