netdev - [PATCH v5 04/14] net: pch_gbe: Add device tree support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20180217201037.3006-5-paul.burton@mips.com>
Date:   Sat, 17 Feb 2018 12:10:27 -0800
From:   Paul Burton <paul.burton@...s.com>
To:     <netdev@...r.kernel.org>
CC:     Hassan Naveed <hassan.naveed@...s.com>,
        Matt Redfearn <matt.redfearn@...s.com>,
        "David S . Miller" <davem@...emloft.net>,
        <linux-mips@...ux-mips.org>, Paul Burton <paul.burton@...s.com>
Subject: [PATCH v5 04/14] net: pch_gbe: Add device tree support

Introduce support for retrieving the PHY reset GPIO from device tree,
which will be used on the MIPS Boston development board. This requires
support for probe deferral in order to work correctly, since the order
of device probe is not guaranteed & typically the EG20T GPIO controller
device will be probed after the ethernet MAC.

Signed-off-by: Paul Burton <paul.burton@...s.com>
Cc: David S. Miller <davem@...emloft.net>
Cc: linux-mips@...ux-mips.org
Cc: netdev@...r.kernel.org
---

Changes in v5: None
Changes in v4:
- Use ERR_CAST(), thanks kbuild test robot/Fengguang!

Changes in v3: None
Changes in v2:
- Tidy up handling of parsing private data, drop err_out.

 .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c   | 31 +++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
index 712ac2f7bb2c..11e8ced4a0f4 100644
--- a/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c
@@ -23,6 +23,8 @@
 #include <linux/net_tstamp.h>
 #include <linux/ptp_classify.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_gpio.h>
 
 #define DRV_VERSION     "1.01"
 const char pch_driver_version[] = DRV_VERSION;
@@ -2556,13 +2558,40 @@ static void pch_gbe_remove(struct pci_dev *pdev)
 	free_netdev(netdev);
 }
 
+static struct pch_gbe_privdata *
+pch_gbe_get_priv(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+{
+	struct pch_gbe_privdata *pdata;
+	struct gpio_desc *gpio;
+
+	if (!IS_ENABLED(CONFIG_OF))
+		return (struct pch_gbe_privdata *)pci_id->driver_data;
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	gpio = devm_gpiod_get(&pdev->dev, "phy-reset", GPIOD_ASIS);
+	if (!IS_ERR(gpio))
+		pdata->phy_reset_gpio = gpio;
+	else if (PTR_ERR(gpio) != -ENOENT)
+		return ERR_CAST(gpio);
+
+	return pdata;
+}
+
 static int pch_gbe_probe(struct pci_dev *pdev,
 			  const struct pci_device_id *pci_id)
 {
 	struct net_device *netdev;
 	struct pch_gbe_adapter *adapter;
+	struct pch_gbe_privdata *pdata;
 	int ret;
 
+	pdata = pch_gbe_get_priv(pdev, pci_id);
+	if (IS_ERR(pdata))
+		return PTR_ERR(pdata);
+
 	ret = pcim_enable_device(pdev);
 	if (ret)
 		return ret;
@@ -2600,7 +2629,7 @@ static int pch_gbe_probe(struct pci_dev *pdev,
 	adapter->pdev = pdev;
 	adapter->hw.back = adapter;
 	adapter->hw.reg = pcim_iomap_table(pdev)[PCH_GBE_PCI_BAR];
-	adapter->pdata = (struct pch_gbe_privdata *)pci_id->driver_data;
+	adapter->pdata = pdata;
 	if (adapter->pdata && adapter->pdata->platform_init)
 		adapter->pdata->platform_init(pdev, adapter->pdata);
 
-- 
2.16.1