[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a868b3df-863f-7c0a-424b-f097c79b8d41@gmail.com>
Date: Tue, 20 Feb 2018 22:15:05 +0200
From: Serhey Popovych <serhe.popovych@...il.com>
To: Petr Machata <petrm@...lanox.com>, netdev@...r.kernel.org
Subject: Re: [PATCH iproute2] ip: link_gre6.c: Support
IP6_TNL_F_ALLOW_LOCAL_REMOTE flag
Petr Machata wrote:
> For IP-in-IP tunnels, one can specify the [no]allow-localremote command
> when configuring a device. Under the hood, this flips the
> IP6_TNL_F_ALLOW_LOCAL_REMOTE flag on the netdevice. However, ip6gretap
> and ip6erspan devices, where the flag is also relevant, are not IP-in-IP
> tunnels, and thus there's no way to configure the flag on these
> netdevices. Therefore introduce the command to link_gre6 as well.
>
> The original support was introduced in commit
> 21440d19d957 ("ip: link_ip6tnl.c/ip6tunnel.c: Support IP6_TNL_F_ALLOW_LOCAL_REMOTE flag")
Maybe it is better to rebase this against iproute2-next?
There are lot of changes already done here and there are plans on ip and
ipv6 tunnel modules variants merge.
>
> Signed-off-by: Petr Machata <petrm@...lanox.com>
> ---
> ip/link_gre6.c | 11 +++++++++++
> man/man8/ip-link.8.in | 14 ++++++++++++++
> 2 files changed, 25 insertions(+)
>
> diff --git a/ip/link_gre6.c b/ip/link_gre6.c
> index 4045f65..4c05344 100644
> --- a/ip/link_gre6.c
> +++ b/ip/link_gre6.c
> @@ -44,6 +44,7 @@ static void print_usage(FILE *f)
> " [ flowlabel FLOWLABEL ]\n"
> " [ dscp inherit ]\n"
> " [ fwmark MARK ]\n"
> + " [ [no]allow-localremote ]\n"
> " [ dev PHYS_DEV ]\n"
> " [ noencap ]\n"
> " [ encap { fou | gue | none } ]\n"
> @@ -348,6 +349,10 @@ get_failed:
> invarg("invalid fwmark\n", *argv);
> flags &= ~IP6_TNL_F_USE_ORIG_FWMARK;
> }
> + } else if (strcmp(*argv, "allow-localremote") == 0) {
> + flags |= IP6_TNL_F_ALLOW_LOCAL_REMOTE;
> + } else if (strcmp(*argv, "noallow-localremote") == 0) {
> + flags &= ~IP6_TNL_F_ALLOW_LOCAL_REMOTE;
> } else if (strcmp(*argv, "encaplimit") == 0) {
> NEXT_ARG();
> if (strcmp(*argv, "none") == 0) {
> @@ -534,6 +539,12 @@ static void gre_print_opt(struct link_util *lu, FILE *f, struct rtattr *tb[])
> if (oflags & GRE_CSUM)
> print_bool(PRINT_ANY, "ocsum", "ocsum ", true);
>
> + if (flags & IP6_TNL_F_ALLOW_LOCAL_REMOTE)
> + print_bool(PRINT_ANY,
> + "ip6_tnl_f_allow_local_remote",
> + "allow-localremote ",
> + true);
> +
> if (flags & IP6_TNL_F_USE_ORIG_FWMARK) {
> print_bool(PRINT_ANY,
> "ip6_tnl_f_use_orig_fwmark",
> diff --git a/man/man8/ip-link.8.in b/man/man8/ip-link.8.in
> index 481589e..5dee9fc 100644
> --- a/man/man8/ip-link.8.in
> +++ b/man/man8/ip-link.8.in
> @@ -793,6 +793,8 @@ the following additional arguments are supported:
> ] [
> .BI "dscp inherit"
> ] [
> +.BI "[no]allow-localremote"
> +] [
> .BI dev " PHYS_DEV "
> ] [
> .RB external
> @@ -857,6 +859,11 @@ flag is equivalent to the combination
> - specifies a fixed flowlabel.
>
> .sp
> +.BI [no]allow-localremote
> +- specifies whether to allow remote endpoint to have an address configured on
> +local host.
> +
> +.sp
> .BI tclass " TCLASS"
> - specifies the traffic class field on
> tunneled packets, which can be specified as either a two-digit
> @@ -927,6 +934,8 @@ the following additional arguments are supported:
> ] [
> .BR erspan_hwid " \fIhwid "
> ] [
> +.BI "[no]allow-localremote"
> +] [
> .RB external
> ]
>
> @@ -965,6 +974,11 @@ traffic's source port and direction.
> is a 6-bit value for users to configure.
>
> .sp
> +.BI [no]allow-localremote
> +- specifies whether to allow remote endpoint to have an address configured on
> +local host.
> +
> +.sp
> .BR external
> - make this tunnel externally controlled (or not, which is the default).
> In the kernel, this is referred to as collect metadata mode. This flag is
>
Download attachment "signature.asc" of type "application/pgp-signature" (491 bytes)
Powered by blists - more mailing lists