netdev - Re: [PATCH net-next RFC 0/2] Convert OKI PCH GBE to mdiobus and phylib

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20180221003356.lzdyflx3lsbejcjy@pburton-laptop>
Date:   Tue, 20 Feb 2018 16:33:56 -0800
From:   Paul Burton <paul.burton@...s.com>
To:     Andrew Lunn <andrew@...n.ch>
CC:     netdev <netdev@...r.kernel.org>
Subject: Re: [PATCH net-next RFC 0/2] Convert OKI PCH GBE to mdiobus and
 phylib

Hi Andrew,

On Tue, Feb 20, 2018 at 03:28:17AM +0100, Andrew Lunn wrote:
> Hi Paul
> 
> Here is my stab at converting the OKI PCH GBE to use the common MDIO
> bus and phylib drivers. This is compile tested only, and pretty much
> guaranteed to be broken. But hopefully it will help you. Feel free to
> pick it up and make it work. Without hardware, there is not much more
> i can do, other than answer questions.

Thanks - this will be useful :) I'll try to find some time to get it
running this week.

> The handling of the GPIO for reset is possibly wrong.
> 
> 1) It is probably active high, when active low is wanted. Your patch
>    would sort this out.
> 
> 2) It is possible the reset happens too late. Since there is no device
>    tree binding for the minnow board, it is not possible to register
>    the gpio with the core code until after it has been probed and
>    attached to the MAC. If the PHY is being held in reset, it might
>    not respond to the bus scan, and hence we fail to find it.  If that
>    is true, we need a different solution.

Note that unfortunately I don't have access to the Minnow platform which
the driver as-is currently supports, so I won't be able to observe any
Minnow-specific issues either.

Thanks,
    Paul

> Andrew Lunn (2):
>   net: phy: at803x: Export at803x_debug_reg_mask()
>   net: ethernet: pch_gbe: Convert to mdiobus and phylib
> 
>  drivers/net/ethernet/oki-semi/pch_gbe/Kconfig      |   1 +
>  drivers/net/ethernet/oki-semi/pch_gbe/Makefile     |   2 +-
>  drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h    |  35 +-
>  .../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c    | 118 -------
>  .../net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h    |   8 +-
>  .../ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c    |  89 +----
>  .../net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c   | 373 ++++++++++----------
>  .../net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c  | 265 ---------------
>  .../net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c    | 377 ---------------------
>  .../net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h    |  37 --
>  drivers/net/phy/at803x.c                           |   5 +-
>  include/linux/at803x_phy.h                         |  16 +
>  12 files changed, 227 insertions(+), 1099 deletions(-)
>  delete mode 100644 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c
>  delete mode 100644 drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h
>  create mode 100644 include/linux/at803x_phy.h
> 
> -- 
> 2.16.1
>