netdev - [PATCH net-next 2/4] net/mlx4_en: Remove unnecessary warn print in reset config

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1519741042-24532-3-git-send-email-tariqt@mellanox.com>
Date:   Tue, 27 Feb 2018 16:17:20 +0200
From:   Tariq Toukan <tariqt@...lanox.com>
To:     "David S. Miller" <davem@...emloft.net>
Cc:     netdev@...r.kernel.org, Eran Ben Elisha <eranbe@...lanox.com>,
        Tariq Toukan <tariqt@...lanox.com>
Subject: [PATCH net-next 2/4] net/mlx4_en: Remove unnecessary warn print in reset config

From: Eran Ben Elisha <eranbe@...lanox.com>

In mlx4_en_reset_config, there was a redundant warn print that was left
from previous versions of this function. No warn is needed anymore.

This warn can be confusing when RX-FCS is changed:
Turn OFF RX-FCS:
  mlx4_en: eth1: Changing device configuration rx filter(0) rx vlan(1)
Turn ON RX-FCS:
  mlx4_en: eth1: Changing device configuration rx filter(0) rx vlan(1)

Signed-off-by: Eran Ben Elisha <eranbe@...lanox.com>
Signed-off-by: Tariq Toukan <tariqt@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index b62d2c3f976a..e0adac4a9a19 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
@@ -3634,10 +3634,6 @@ int mlx4_en_reset_config(struct net_device *dev,
 		mlx4_en_stop_port(dev, 1);
 	}
 
-	en_warn(priv, "Changing device configuration rx filter(%x) rx vlan(%x)\n",
-		ts_config.rx_filter,
-		!!(features & NETIF_F_HW_VLAN_CTAG_RX));
-
 	mlx4_en_safe_replace_resources(priv, tmp);
 
 	if (DEV_FEATURE_CHANGED(dev, features, NETIF_F_HW_VLAN_CTAG_RX)) {
-- 
1.8.3.1