netdev - [next-queue PATCH v2 0/8] igb: offloading of receive filters

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180302184344.5744-1-vinicius.gomes@intel.com>
Date:   Fri,  2 Mar 2018 10:43:36 -0800
From:   Vinicius Costa Gomes <vinicius.gomes@...el.com>
To:     intel-wired-lan@...ts.osuosl.org
Cc:     Vinicius Costa Gomes <vinicius.gomes@...el.com>,
        jeffrey.t.kirsher@...el.com, netdev@...r.kernel.org,
        jesus.sanchez-palencia@...el.com
Subject: [next-queue PATCH v2 0/8] igb: offloading of receive filters

Hi,

Changes from v1:
 - Addressed review comments from Alexander Duyck and Florian
   Fainelli;
 - Adding and removing cls_flower filters are now proposed in the same
   patch;
 - cls_flower filters are kept in a separated list from "ethtool"
   filters (so that section of the original cover letter is no longer
   valid);
 - The patch adding support for ethtool filters is now independent from
   the rest of the series;

Original cover letter:

This series enables some ethtool and tc-flower filters to be offloaded
to igb-based network controllers. This is useful when the system
configurator want to steer kinds of traffic to a specific hardware
queue.

The first two commits are bug fixes.

The basis of this series is to export the internal API used to
configure address filters, so they can be used by ethtool, and
extending the functionality so an source address can be handled.

Then, we enable the tc-flower offloading implementation to re-use the
same infrastructure as ethtool, and storing them in the per-adapter
"nfc" (Network Filter Config?) list. But for consistency, for
destructive access they are separated, i.e. an filter added by
tc-flower can only be removed by tc-flower, but ethtool can read them
all.

Only support for VLAN Prio, Source and Destination MAC Address, and
Ethertype is enabled for now.

Open question:
  - igb is initialized with the number of traffic classes as 1, if we
  want to use multiple traffic classes we need to increase this value,
  the only way I could find is to use mqprio (for example). Should igb
  be initialized with, say, the number of queues as its "num_tc"?

Vinicius Costa Gomes (8):
  igb: Fix not adding filter elements to the list
  igb: Fix queue selection on MAC filters on i210 and i211
  igb: Enable the hardware traffic class feature bit for igb models
  igb: Add support for MAC address filters specifying source addresses
  igb: Enable nfc filters to specify MAC addresses
  igb: Add MAC address support for ethtool nftuple filters
  igb: Add the skeletons for tc-flower offloading
  igb: Add support for adding offloaded clsflower filters

 drivers/net/ethernet/intel/igb/e1000_defines.h |   2 +
 drivers/net/ethernet/intel/igb/igb.h           |  12 +
 drivers/net/ethernet/intel/igb/igb_ethtool.c   |  65 +++++-
 drivers/net/ethernet/intel/igb/igb_main.c      | 294 ++++++++++++++++++++++++-
 4 files changed, 359 insertions(+), 14 deletions(-)

--
2.16.2