[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <e39c8a7c-a6ad-3414-fec9-31540b65b010@oracle.com>
Date: Fri, 16 Mar 2018 09:21:16 -0700
From: Shannon Nelson <shannon.nelson@...cle.com>
To: Anirudh Venkataramanan <anirudh.venkataramanan@...el.com>,
intel-wired-lan@...ts.osuosl.org
Cc: netdev@...r.kernel.org
Subject: Re: [PATCH v2 03/15] ice: Start hardware initialization
On 3/15/2018 4:47 PM, Anirudh Venkataramanan wrote:
> This patch implements multiple pieces of the initialization flow
> as follows:
>
> 1) A reset is issued to ensure a clean device state, followed
> by initialization of admin queue interface.
>
> 2) Once the admin queue interface is up, clear the PF config
> and transition the device to non-PXE mode.
>
> 3) Get the NVM configuration stored in the device's non-volatile
> memory (NVM) using ice_init_nvm.
>
> CC: Shannon Nelson <shannon.nelson@...cle.com>
> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@...el.com>
> ---
> v2: Addressed Shannon Nelson's review comments by
> 1) removing an unnecessary register write in ice_aq_clear_pxe_mode.
> 2) adding a comment explaining the need to convert word sized values
> to byte sized values.
These two changes look fine.
sln
Acked-by: Shannon Nelson <shannon.nelson@...cle.com>
Powered by blists - more mailing lists