| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180318185246.19311-5-f.fainelli@gmail.com>
Date: Sun, 18 Mar 2018 11:52:46 -0700
From: Florian Fainelli <f.fainelli@...il.com>
To: netdev@...r.kernel.org
Cc: Florian Fainelli <f.fainelli@...il.com>, privat@...l-hjelmeland.no,
andrew@...n.ch, vivien.didelot@...oirfairelinux.com,
davem@...emloft.net, rmk+kernel@...linux.org.uk,
sean.wang@...iatek.com, Woojung.Huh@...rochip.com,
john@...ozen.org, cphealy@...il.com
Subject: [PATCH net-next 4/4] net: dsa: bcm_sf2: Implement phylink_mac_ops
Make the bcm_sf2 driver implement phylink_mac_ops since it needs to
support a wide variety of network interfaces: internal & external MDIO
PHYs, fixed PHYs, MoCA with MMIO link status.
A large amount of what needs to be done already exists under
bcm_sf2_sw_adjust_link() so we are essentially breaking this down into
the necessary operation for PHYLINK to work: mac_config, mac_link_up,
mac_link_down and validate. We can now entirely get rid of most of what
fixed_link_update() provided because only the link information is actually
necessary. We still have to force DUPLEX_FULL for legacy Device Tree bindings
that did not specify that before.
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
drivers/net/dsa/bcm_sf2.c | 186 +++++++++++++++++++++++++++++-----------------
1 file changed, 118 insertions(+), 68 deletions(-)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 726d75a61795..b4d5fdcf4183 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -306,7 +306,8 @@ static int bcm_sf2_sw_mdio_write(struct mii_bus *bus, int addr, int regnum,
static irqreturn_t bcm_sf2_switch_0_isr(int irq, void *dev_id)
{
- struct bcm_sf2_priv *priv = dev_id;
+ struct dsa_switch *ds = dev_id;
+ struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
priv->irq0_stat = intrl2_0_readl(priv, INTRL2_CPU_STATUS) &
~priv->irq0_mask;
@@ -317,16 +318,21 @@ static irqreturn_t bcm_sf2_switch_0_isr(int irq, void *dev_id)
static irqreturn_t bcm_sf2_switch_1_isr(int irq, void *dev_id)
{
- struct bcm_sf2_priv *priv = dev_id;
+ struct dsa_switch *ds = dev_id;
+ struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
priv->irq1_stat = intrl2_1_readl(priv, INTRL2_CPU_STATUS) &
~priv->irq1_mask;
intrl2_1_writel(priv, priv->irq1_stat, INTRL2_CPU_CLEAR);
- if (priv->irq1_stat & P_LINK_UP_IRQ(P7_IRQ_OFF))
- priv->port_sts[7].link = 1;
- if (priv->irq1_stat & P_LINK_DOWN_IRQ(P7_IRQ_OFF))
- priv->port_sts[7].link = 0;
+ if (priv->irq1_stat & P_LINK_UP_IRQ(P7_IRQ_OFF)) {
+ priv->port_sts[7].link = true;
+ dsa_port_phylink_mac_change(ds, 7, true);
+ }
+ if (priv->irq1_stat & P_LINK_DOWN_IRQ(P7_IRQ_OFF)) {
+ priv->port_sts[7].link = false;
+ dsa_port_phylink_mac_change(ds, 7, false);
+ }
return IRQ_HANDLED;
}
@@ -473,13 +479,56 @@ static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
return priv->hw_params.gphy_rev;
}
-static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
- struct phy_device *phydev)
+static void bcm_sf2_sw_validate(struct dsa_switch *ds, int port,
+ unsigned long *supported,
+ struct phylink_link_state *state)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+
+ if (!phy_interface_mode_is_rgmii(state->interface) &&
+ state->interface != PHY_INTERFACE_MODE_MII &&
+ state->interface != PHY_INTERFACE_MODE_REVMII &&
+ state->interface != PHY_INTERFACE_MODE_GMII &&
+ state->interface != PHY_INTERFACE_MODE_INTERNAL &&
+ state->interface != PHY_INTERFACE_MODE_MOCA) {
+ bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
+ dev_err(ds->dev,
+ "Unsupported interface: %d\n", state->interface);
+ return;
+ }
+
+ /* Allow all the expected bits */
+ phylink_set(mask, Autoneg);
+ phylink_set_port_modes(mask);
+ phylink_set(mask, Pause);
+ phylink_set(mask, Asym_Pause);
+
+ /* With the exclusion of MII and Reverse MII, we support Gigabit,
+ * including Half duplex
+ */
+ if (state->interface != PHY_INTERFACE_MODE_MII &&
+ state->interface != PHY_INTERFACE_MODE_REVMII) {
+ phylink_set(mask, 1000baseT_Full);
+ phylink_set(mask, 1000baseT_Half);
+ }
+
+ phylink_set(mask, 10baseT_Half);
+ phylink_set(mask, 10baseT_Full);
+ phylink_set(mask, 100baseT_Half);
+ phylink_set(mask, 100baseT_Full);
+
+ bitmap_and(supported, supported, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+ bitmap_and(state->advertising, state->advertising, mask,
+ __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static void bcm_sf2_sw_mac_config(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ const struct phylink_link_state *state)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- struct ethtool_eee *p = &priv->dev->ports[port].eee;
u32 id_mode_dis = 0, port_mode;
- const char *str = NULL;
u32 reg, offset;
if (priv->type == BCM7445_DEVICE_ID)
@@ -487,62 +536,48 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
else
offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
- switch (phydev->interface) {
+ switch (state->interface) {
case PHY_INTERFACE_MODE_RGMII:
- str = "RGMII (no delay)";
id_mode_dis = 1;
+ /* fallthrough */
case PHY_INTERFACE_MODE_RGMII_TXID:
- if (!str)
- str = "RGMII (TX delay)";
port_mode = EXT_GPHY;
break;
case PHY_INTERFACE_MODE_MII:
- str = "MII";
port_mode = EXT_EPHY;
break;
case PHY_INTERFACE_MODE_REVMII:
- str = "Reverse MII";
port_mode = EXT_REVMII;
break;
default:
- /* All other PHYs: internal and MoCA */
- goto force_link;
- }
-
- /* If the link is down, just disable the interface to conserve power */
- if (!phydev->link) {
- reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
- reg &= ~RGMII_MODE_EN;
- reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
+ /* all other PHYs: internal and MoCA */
goto force_link;
}
- /* Clear id_mode_dis bit, and the existing port mode, but
- * make sure we enable the RGMII block for data to pass
+ /* Clear id_mode_dis bit, and the existing port mode, let
+ * RGMII_MODE_EN bet set by mac_link_{up,down}
*/
reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
reg &= ~ID_MODE_DIS;
reg &= ~(PORT_MODE_MASK << PORT_MODE_SHIFT);
reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
- reg |= port_mode | RGMII_MODE_EN;
+ reg |= port_mode;
if (id_mode_dis)
reg |= ID_MODE_DIS;
- if (phydev->pause) {
- if (phydev->asym_pause)
+ if (state->pause & MLO_PAUSE_TXRX_MASK) {
+ if (state->pause & MLO_PAUSE_TX)
reg |= TX_PAUSE_EN;
reg |= RX_PAUSE_EN;
}
reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
- pr_info("Port %d configured for %s\n", port, str);
-
force_link:
/* Force link settings detected from the PHY */
reg = SW_OVERRIDE;
- switch (phydev->speed) {
+ switch (state->speed) {
case SPEED_1000:
reg |= SPDSTS_1000 << SPEED_SHIFT;
break;
@@ -551,33 +586,61 @@ static void bcm_sf2_sw_adjust_link(struct dsa_switch *ds, int port,
break;
}
- if (phydev->link)
+ if (state->link)
reg |= LINK_STS;
- if (phydev->duplex == DUPLEX_FULL)
+ if (state->duplex == DUPLEX_FULL)
reg |= DUPLX_MODE;
core_writel(priv, reg, offset);
-
- if (!phydev->is_pseudo_fixed_link)
- p->eee_enabled = b53_eee_init(ds, port, phydev);
}
-static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
- struct phylink_link_state *status)
+static void bcm_sf2_sw_mac_link_set(struct dsa_switch *ds, int port,
+ phy_interface_t interface, bool link)
{
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
- u32 duplex, pause, offset;
u32 reg;
- if (priv->type == BCM7445_DEVICE_ID)
- offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
+ if (!phy_interface_mode_is_rgmii(interface) &&
+ interface != PHY_INTERFACE_MODE_MII &&
+ interface != PHY_INTERFACE_MODE_REVMII)
+ return;
+
+ /* If the link is down, just disable the interface to conserve power */
+ reg = reg_readl(priv, REG_RGMII_CNTRL_P(port));
+ if (link)
+ reg |= RGMII_MODE_EN;
else
- offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
+ reg &= ~RGMII_MODE_EN;
+ reg_writel(priv, reg, REG_RGMII_CNTRL_P(port));
+}
+
+static void bcm_sf2_sw_mac_link_down(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface)
+{
+ bcm_sf2_sw_mac_link_set(ds, port, interface, false);
+}
+
+static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
+ unsigned int mode,
+ phy_interface_t interface,
+ struct phy_device *phydev)
+{
+ struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
+ struct ethtool_eee *p = &priv->dev->ports[port].eee;
- duplex = core_readl(priv, CORE_DUPSTS);
- pause = core_readl(priv, CORE_PAUSESTS);
+ bcm_sf2_sw_mac_link_set(ds, port, interface, true);
- status->link = 0;
+ if (mode == MLO_AN_PHY && phydev)
+ p->eee_enabled = b53_eee_init(ds, port, phydev);
+}
+
+static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
+ struct phylink_link_state *status)
+{
+ struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
+
+ status->link = false;
/* MoCA port is special as we do not get link status from CORE_LNKSTS,
* which means that we need to force the link at the port override
@@ -596,26 +659,10 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port,
*/
if (!status->link)
netif_carrier_off(ds->ports[port].slave);
- status->duplex = 1;
+ status->duplex = DUPLEX_FULL;
} else {
- status->link = 1;
- status->duplex = !!(duplex & (1 << port));
+ status->link = true;
}
-
- reg = core_readl(priv, offset);
- reg |= SW_OVERRIDE;
- if (status->link)
- reg |= LINK_STS;
- else
- reg &= ~LINK_STS;
- core_writel(priv, reg, offset);
-
- if ((pause & (1 << port)) &&
- (pause & (1 << (port + PAUSESTS_TX_PAUSE_SHIFT))))
- status->pause |= MLO_PAUSE_TX;
-
- if (pause & (1 << port))
- status->pause |= MLO_PAUSE_TXRX_MASK;
}
static void bcm_sf2_enable_acb(struct dsa_switch *ds)
@@ -858,7 +905,10 @@ static const struct dsa_switch_ops bcm_sf2_ops = {
.get_ethtool_stats = b53_get_ethtool_stats,
.get_sset_count = b53_get_sset_count,
.get_phy_flags = bcm_sf2_sw_get_phy_flags,
- .adjust_link = bcm_sf2_sw_adjust_link,
+ .phylink_validate = bcm_sf2_sw_validate,
+ .phylink_mac_config = bcm_sf2_sw_mac_config,
+ .phylink_mac_link_down = bcm_sf2_sw_mac_link_down,
+ .phylink_mac_link_up = bcm_sf2_sw_mac_link_up,
.fixed_link_update = bcm_sf2_sw_fixed_link_update,
.suspend = bcm_sf2_sw_suspend,
.resume = bcm_sf2_sw_resume,
@@ -1062,14 +1112,14 @@ static int bcm_sf2_sw_probe(struct platform_device *pdev)
bcm_sf2_intr_disable(priv);
ret = devm_request_irq(&pdev->dev, priv->irq0, bcm_sf2_switch_0_isr, 0,
- "switch_0", priv);
+ "switch_0", ds);
if (ret < 0) {
pr_err("failed to request switch_0 IRQ\n");
goto out_mdio;
}
ret = devm_request_irq(&pdev->dev, priv->irq1, bcm_sf2_switch_1_isr, 0,
- "switch_1", priv);
+ "switch_1", ds);
if (ret < 0) {
pr_err("failed to request switch_1 IRQ\n");
goto out_mdio;
--
2.14.1
Powered by blists - more mailing lists