Date:   Tue, 20 Mar 2018 14:58:38 +0700
From:   Alexey Roslyakov <alexey.roslyakov@...il.com>
To:     Arend van Spriel <arend.vanspriel@...adcom.com>
Cc:     Florian Fainelli <f.fainelli@...il.com>,
        Andrew Lunn <andrew@...n.ch>,
        Kalle Valo <kvalo@...eaurora.org>, robh+dt@...nel.org,
        mark.rutland@....com, franky.lin@...adcom.com,
        hante.meuleman@...adcom.com, chi-hsien.lin@...ress.com,
        wright.feng@...ress.com, netdev@...r.kernel.org,
        linux-wireless@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, brcm80211-dev-list.pdl@...adcom.com,
        brcm80211-dev-list@...ress.com,
        Ulf Hansson <ulf.hansson@...aro.org>
Subject: Re: [PATCH net-next v2 2/2] dt: bindings: add new dt entries for brcmfmac

Arend,

>Also I am not sure if the broken-sg-support is still needed. We added that for omap_hsmmc, but that has since changed to scatter-gather emulation so it might not be needed anymore.
I can confirm it doesn't impact wifi performance in case of rk3288+ap6335.

But I still have to set settings->bus.sdio.sd_head_align = 4 and
settings->bus.sdio.sd_sgentry_align = 512, otherwise
brcmf_sdiod_sglist_rw fails:

  974.888452] net_ratelimit: 8 callbacks suppressed
[  974.888457] brcmfmac: brcmf_sdiod_sglist_rw: CMD53 sg block read failed -84
[  974.901527] brcmfmac: brcmf_sdio_rxglom: glom read of 6144 bytes failed: -5
[  974.910248] brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame
[  975.018041] brcmfmac: brcmf_sdiod_sglist_rw: CMD53 sg block read failed -84
[  975.025833] brcmfmac: brcmf_sdio_rxglom: glom read of 6144 bytes failed: -5
[  975.033634] brcmfmac: brcmf_sdio_rxfail: abort command, terminate frame
[  975.033924] dwmmc_rockchip ff0d0000.dwmmc: Unexpected command
timeout, state 0
[  975.049209] brcmfmac: brcmf_sdio_readframes: RXHEADER FAILED: -84
[  975.056034] brcmfmac: brcmf_sdio_rxfail: abort command, terminate
frame, send NAK
[  975.068367] brcmfmac: brcmf_sdio_hdparse: HW header length too long
[  975.075379] brcmfmac: brcmf_sdio_rxfail: terminate frame

Regards,
  Alex

On 20 March 2018 at 06:16, Arend van Spriel
<arend.vanspriel@...adcom.com> wrote:
> + Uffe
>
> On 3/19/2018 6:55 PM, Florian Fainelli wrote:
>>
>> On 03/19/2018 07:10 AM, Alexey Roslyakov wrote:
>>>
>>> Hi Arend,
>>> I appreciate your response. In my opinion, it has nothing to do with
>>> SDIO host, because it defines "quirks" in the driver itself.
>>
>>
>> It is not clear to me from your patch series whether the problem is that:
>>
>> - the SDIO device has a specific alignment requirements, which would be
>> either a SDIO device driver limitation/issue or maybe the underlying
>> hardware device/firmware requiring that
>>
>> - the SDIO host controller used is not capable of coping nicely with
>> these said limitations
>>
>> It seems to me like what you are doing here is a) applicable to possibly
>> more SDIO devices and host combinations, and b) should likely be done at
>> the layer between the host and device, such that it is available to more
>> combinations.
>
>
> Indeed. That was my thought exactly and I can not imagine Uffe would push
> back on that reasoning.
>
>>> If I get it right, you mean something like this:
>>>
>>> mmc3: mmc@...2000 {
>>> ...
>>>          broken-sg-support;
>>>          sd-head-align = 4;
>>>          sd-sgentry-align = 512;
>>>
>>>          brcmf: wifi@1 {
>>>                  ...
>>>          };
>>> };
>>>
>>> Where dt: bindings documentation for these entries should reside?
>>> In generic MMC bindings? Well, this is the very special case and
>>> mmc-linux maintainer will unlikely to accept these changes.
>>> Also, extra kernel code modification might be required. It could make
>>> quite trivial change much more complex.
>>
>>
>> If the MMC maintainers are not copied on this patch series, it will
>> likely be hard for them to identify this patch series and chime in...
>
>
> The main question is whether this is indeed a "very special case" as Alexey
> claims it to be or that it is likely to be applicable to other device and
> host combinations as you are suggesting.
>
> If these properties are imposed by the host or host controller it would make
> sense to have these in the mmc bindings.
>
>>>
>>>> Also I am not sure if the broken-sg-support is still needed. We added
>>>> that for omap_hsmmc, but that has since changed to scatter-gather emulation
>>>> so it might not be needed anymore.
>>>
>>>
>>> I've experienced the problem with rk3288 (dw-mmc host) and sdio
>>> settings like above solved it.
>>> Frankly, I haven't investigated any deeper which one of the settings
>>> helped in my case yet...
>>> I will try to get rid of broken-sg-support first and let you know if
>>> it does make any difference.
>
>
> Are you using some chromebook. I have some lying around here so I could also
> look into it. What broadcom chipset do you have?
>
> Regards,
> Arend
>
>
>>> All the best,
>>>    Alex.
>>>
>>> On 19 March 2018 at 16:31, Arend van Spriel
>>> <arend.vanspriel@...adcom.com> wrote:
>>>>
>>>> On 3/19/2018 2:40 AM, Alexey Roslyakov wrote:
>>>>>
>>>>>
>>>>> In case if the host has higher align requirements for SG items, allow
>>>>> setting device-specific aligns for scatterlist items.
>>>>>
>>>>> Signed-off-by: Alexey Roslyakov <alexey.roslyakov@...il.com>
>>>>> ---
>>>>>    Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
>>>>> | 5
>>>>> +++++
>>>>>    1 file changed, 5 insertions(+)
>>>>>
>>>>> diff --git
>>>>> a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
>>>>> b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
>>>>> index 86602f264dce..187b8c1b52a7 100644
>>>>> ---
>>>>> a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
>>>>> +++
>>>>> b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt
>>>>> @@ -17,6 +17,11 @@ Optional properties:
>>>>>          When not specified the device will use in-band SDIO
>>>>> interrupts.
>>>>>     - interrupt-names : name of the out-of-band interrupt, which must
>>>>> be
>>>>> set
>>>>>          to "host-wake".
>>>>> + - brcm,broken-sg-support : boolean flag to indicate that the SDIO
>>>>> host
>>>>> +       controller has higher align requirement than 32 bytes for each
>>>>> +       scatterlist item.
>>>>> + - brcm,sd-head-align : alignment requirement for start of data
>>>>> buffer.
>>>>> + - brcm,sd-sgentry-align : length alignment requirement for each sg
>>>>> entry.
>>>>
>>>>
>>>>
>>>> Hi Alexey,
>>>>
>>>> Thanks for the patch. However, the problem with these is that they are
>>>> characterizing the host controller and not the wireless device. So from
>>>> device tree perspective , which is to describe the hardware, these
>>>> properties should be SDIO host controller properties. Also I am not sure
>>>> if
>>>> the broken-sg-support is still needed. We added that for omap_hsmmc, but
>>>> that has since changed to scatter-gather emulation so it might not be
>>>> needed
>>>> anymore.
>>>>
>>>> Regards,
>>>> Arend
>>>
>>>
>>>
>>>
>>
>>
>



-- 
With best regards,
  Alexey Roslyakov
Email: alexey.roslyakov@...il.com

Powered by blists - more mailing lists