Message-ID: <ffd1d969-c35f-94a1-1d8a-881d76b1bcbd@infradead.org>
Date:   Wed, 21 Mar 2018 10:07:14 -0700
From:   Randy Dunlap <rdunlap@...radead.org>
To:     Tal Gilboa <talgi@...lanox.com>,
        "David S. Miller" <davem@...emloft.net>
Cc:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        Tariq Toukan <tariqt@...lanox.com>
Subject: Re: [PATCH net-next] Documentation/networking: Add net DIM
 documentation

On 03/21/2018 02:30 AM, Tal Gilboa wrote:
> Net DIM is a generic algorithm, purposed for dynamically
> optimizing network devices interrupt moderation. This
> document describes how it works and how to use it.
> 
> Signed-off-by: Tal Gilboa <talgi@...lanox.com>
> ---
>  Documentation/networking/net_dim.txt | 174 +++++++++++++++++++++++++++++++++++
>  1 file changed, 174 insertions(+)
>  create mode 100644 Documentation/networking/net_dim.txt
> 
> diff --git a/Documentation/networking/net_dim.txt b/Documentation/networking/net_dim.txt
> new file mode 100644
> index 0000000..ef622c8
> --- /dev/null
> +++ b/Documentation/networking/net_dim.txt
> @@ -0,0 +1,174 @@
> +Net DIM - Generic Network Dynamic Interrupt Moderation
> +======================================================
> +
> +Author:
> +	Tal Gilboa <talgi@...lanox.com>
> +
> +
> +Contents
> +=========
> +
> +- Assumptions
> +- Introduction
> +- The Net DIM Algorithm
> +- Registering a Network Device to DIM
> +- Example
> +
> +Part 0: Assumptions
> +======================
> +
> +This document assumes the reader has basic knowledge in network drivers
> +and in general interrupt moderation.
> +
> +
> +Part I: Introduction
> +======================
> +
> +Dynamic Interrupt Moderation (DIM) (in networking) refers to changing the interrupt
> +moderation configuration of a channel in order to optimize packet processing.
> +The mechanism includes an algorithm which decides if and how to change
> +moderation parameters for a channel, usually by performing an analysis on
> +runtime data sampled from the system. Net DIM is such a mechanism. In each
> +iteration of the algorithm, it analyses a given sample of the data, compares it to
> +the previous sample and if required, is can decide to change some of the interrupt moderation

                                        it can

> +configuration fields. The data sample is composed of data bandwidth, the number of
> +packets and the number of events. The time between samples is also measured. Net DIM
> +compares the current and the previous data and returns an adjusted interrupt
> +moderation configuration object. In some cases, the algorithm might decide not
> +to change anything. The configuration fields are the minimum duration
> +(microseconds) allowed between events and the maximum number of wanted packets
> +per event. The Net DIM algorithm ascribes importance to increase bandwidth over
> +reducing interrupt rate.
> +
> +
> +Part II: The Net DIM Algorithm
> +===============================
> +
> +Each iteration of the Net DIM algorithm follows these steps:
> +1. Calculates new data sample.
> +2. Compares it to previous sample.
> +3. Makes a decision - suggests interrupt moderation configuration fields.
> +4. Applies a schedule work function, which applies suggested configuration.
> +
> +The first two steps are straight forward, both the new and the previous data are

                           straightforward;

> +supplied by the driver registered to Net DIM. The previous data is the new data
> +supplied to the previous iteration. The comparison step checks the difference
> +between the new and previous data and decides on the result of the last step. A step
> +would result as "better" if bandwidth increases and as "worse" if bandwidth
> +reduces. If there is no change in bandwidth, the packet rate is compared in a similar
> +fashion - increase == "better" and decrease == "worse". In case there is no
> +change in the packet rate as well, the interrupt rate is compared. Here the
> +algorithm tries to optimize for lower interrupt rate so an increase in the
> +interrupt rate is considered "worse" and a decrease is considered "better".
> +Step #2 has an optimization for avoiding false results, it only considers a

                                                  results:

> +difference between samples as valid if it is greater than a certain percentage.
> +Also, since Net DIM does not measure anything by itself, it assumes the data
> +provided by the driver is valid.
> +
> +Step #3 decides on the suggested configuration based on the result from step #2
> +and the internal state of the algorithm. The states reflect the "direction" of
> +the algorithm, is it going left (reducing moderation), right (increasing

       algorithm:

> +moderation) or standing still. Another optimization is that if a decision
> +to stay still is made multiple times, the interval between iterations of the
> +algorithm would increase in order to reduce calculation overhead. Also, after
> +"parking" on one of the most left or most right decisions, the algorithm may
> +decide to verify this decision by taking a step on the other direction. This is

                                              step in

> +done in order to avoid getting stuck in a "deep sleep" scenario. Once a
> +decision is made, an interrupt moderation configuration is selected from
> +the predefined profiles.
> +
> +The last step is to notify the registered driver that it should apply the suggested
> +configuration. This is done by scheduling a work function, defined by the Net DIM
> +API and provided by the registered driver.
> +
> +As you can see, Net DIM itself does not actively interact with the system. It
> +would have trouble making the correct decisions if the wrong data is supplied to it
> +and it would be useless if the work function would not apply the suggested
> +configuration. This does, however, allows the registered driver some room for manoeuvre

                                      allow

> +as it may provide partial data or ignore the algorithm suggestion under some
> +conditions.
> +
> +
> +Part III: Registering a Network Device to DIM
> +==============================================
> +
> +Net DIM API exposes the main function net_dim(struct net_dim *dim,
> +struct net_dim_sample end_sample). This function is the entry point to the Net
> +DIM algorithm and has to be called every time the driver would like to check if
> +it should change interrupt moderation parameters. The driver should provide two
> +data structures: struct net_dim and struct net_dim_sample. Struct net_dim
> +describes the state of DIM for a specific object (RX queue, TX queue,
> +other queues, etc.). This includes the current selected profile, previous data
> +samples, the callback function provided by the driver and more.
> +Struct net_dim_sample describes a data sample, which will be compared to the
> +data sample stored in struct net_dim in order to decide on the algorithm's next
> +step. The sample should include bytes, packets and interrupts, measured by
> +the driver.
> +
> +In order to use Net DIM from a networking driver, the driver needs to call the
> +main net_dim() function. The recommended method is to call net_dim() on each
> +interrupt. Since Net DIM has a built-in moderation and it might decide to skip
> +iterations under certain conditions, there is no need to moderate the net_dim()
> +calls as well. As mentioned above, the driver needs to provide an object of type
> +struct net_dim to the net_dim() function call. It is advised for each entity
> +using Net DIM to hold a struct net_dim as part of its data structure and use it
> +as the main Net DIM API object. The struct net_dim_sample should hold the latest
> +bytes, packets and interrupts count. No need to perform any calculations, just
> +include the raw data.
> +
> +The net_dim() call itself does not return anything. Instead Net DIM relies on the
> +driver to provide a callback function, which is called when the algorithm
> +decides to make a change in the interrupt moderation parameters. This callback
> +will be scheduled and ran in a separate thread in order not to add overhead to

                     and run

> +the data flow. After the work is done, Net DIM algorithm needs to be set to
> +the proper state in order to move to the next iteration.
> +
> +
> +Part IV: Example
> +=================
> +
> +The following code demonstrates how to register a driver to Net DIM. The actual
> +usage is not complete but it should make the outline if the usage clear.

                                                        of the

> +
> +my_driver.c:
> +
> +#include <linux/net_dim.h>
> +
> +/* Callback for net DIM to schedule on a decision to change moderation */
> +void my_driver_do_dim_work(struct work_struct *work)
> +{
> +	/* Get struct net_dim from struct work_struct */
> +	struct net_dim *dim = container_of(work, struct net_dim,
> +					   work);
> +	/* Do interrupt moderation related stuff */
> +	...
> +
> +	/* Signal net DIM work is done and it should move to next iteration */
> +	dim->state = NET_DIM_START_MEASURE;
> +}
> +
> +/* My driver's interrupt handler */
> +int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...)
> +{
> +	...
> +	/* A struct to hold current measured data */
> +	struct net_dim_sample dim_sample;
> +	...
> +	/* Initiate data sample struct with current data */
> +	net_dim_sample(my_entity->events,
> +		       my_entity->packets,
> +		       my_entity->bytes,
> +		       &dim_sample);
> +	/* Call net DIM */
> +	net_dim(&my_entity->dim, dim_sample);
> +	...
> +}
> +
> +/* My entity's initialization function (my_entity was already allocated) */
> +int my_driver_init_my_entity(struct my_driver_entity *my_entity, ...)
> +{
> +	...
> +	/* Initiate struct work_struct with my driver's callback function */
> +	INIT_WORK(&my_entity->dim.work, my_driver_do_dim_work);
> +	...
> +}
> 


-- 
~Randy

Powered by blists - more mailing lists