netdev - Re: [PATCH net-next 2/8] dt-bindings: net: add DT bindings for Microsemi MIIM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <6cb618e9-0aa0-ba54-b556-d7a6823913d7@gmail.com>
Date:   Fri, 23 Mar 2018 14:46:38 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     Alexandre Belloni <alexandre.belloni@...tlin.com>,
        "David S . Miller" <davem@...emloft.net>
Cc:     Allan Nielsen <Allan.Nielsen@...rosemi.com>,
        razvan.stefanescu@....com, po.liu@....com,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        Andrew Lunn <andrew@...n.ch>, netdev@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-mips@...ux-mips.org, Rob Herring <robh+dt@...nel.org>
Subject: Re: [PATCH net-next 2/8] dt-bindings: net: add DT bindings for
 Microsemi MIIM

On 03/23/2018 01:11 PM, Alexandre Belloni wrote:
> DT bindings for the Microsemi MII Management Controller found on Microsemi
> SoCs
> 
> Cc: Rob Herring <robh+dt@...nel.org>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
> ---
>  .../devicetree/bindings/net/mscc-miim.txt          | 25 ++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/mscc-miim.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/mscc-miim.txt b/Documentation/devicetree/bindings/net/mscc-miim.txt
> new file mode 100644
> index 000000000000..711ac9ab853c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/mscc-miim.txt
> @@ -0,0 +1,25 @@
> +Microsemi MII Management Controller (MIIM) / MDIO
> +=================================================
> +
> +Properties:
> +- compatible: must be "mscc,ocelot-miim"
> +- reg: The base address of the MDIO bus controller register bank. Optionally, a
> +  second register bank can be defined if there is an associated reset register
> +  for internal PHYs
> +- #address-cells: Must be <1>.
> +- #size-cells: Must be <0>.  MDIO addresses have no size component.

Missing interrupt property documentation (sorry), other than that:

Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
-- 
Florian