netdev - [net 8/8] net/mlx5e: Sync netdev vxlan ports at open

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180323220534.19353-9-saeedm@mellanox.com>
Date:   Fri, 23 Mar 2018 15:05:34 -0700
From:   Saeed Mahameed <saeedm@...lanox.com>
To:     "David S. Miller" <davem@...emloft.net>
Cc:     netdev@...r.kernel.org, Shahar Klein <shahark@...lanox.com>,
        Saeed Mahameed <saeedm@...lanox.com>
Subject: [net 8/8] net/mlx5e: Sync netdev vxlan ports at open

From: Shahar Klein <shahark@...lanox.com>

When mlx5_core is loaded it is expected to sync ports
with all vxlan devices so it can support vxlan encap/decap.
This is done via udp_tunnel_get_rx_info(). Currently this
call is set in mlx5e_nic_enable() and if the netdev is not in
NETREG_REGISTERED state it will not be called.

Normally on load the netdev state is not NETREG_REGISTERED
so udp_tunnel_get_rx_info() will not be called.

Moving udp_tunnel_get_rx_info() to mlx5e_open() so
it will be called on netdev UP event and allow encap/decap.

Fixes: 610e89e05c3f ("net/mlx5e: Don't sync netdev state when not registered")
Signed-off-by: Shahar Klein <shahark@...lanox.com>
Reviewed-by: Roi Dayan <roid@...lanox.com>
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index e35859657217..9b4827d36e3e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -2572,6 +2572,9 @@ int mlx5e_open(struct net_device *netdev)
 		mlx5_set_port_admin_status(priv->mdev, MLX5_PORT_UP);
 	mutex_unlock(&priv->state_lock);
 
+	if (mlx5e_vxlan_allowed(priv->mdev))
+		udp_tunnel_get_rx_info(netdev);
+
 	return err;
 }
 
@@ -4327,12 +4330,6 @@ static void mlx5e_nic_enable(struct mlx5e_priv *priv)
 #ifdef CONFIG_MLX5_CORE_EN_DCB
 	mlx5e_dcbnl_init_app(priv);
 #endif
-	/* Device already registered: sync netdev system state */
-	if (mlx5e_vxlan_allowed(mdev)) {
-		rtnl_lock();
-		udp_tunnel_get_rx_info(netdev);
-		rtnl_unlock();
-	}
 
 	queue_work(priv->wq, &priv->set_rx_mode_work);
 
-- 
2.14.3