| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180323223925.21678-11-saeedm@mellanox.com>
Date: Fri, 23 Mar 2018 15:39:20 -0700
From: Saeed Mahameed <saeedm@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, Or Gerlitz <ogerlitz@...lanox.com>,
Saeed Mahameed <saeedm@...lanox.com>
Subject: [net-next 10/15] net/mlx5e: Offload tc vlan push/pop using HW action
From: Or Gerlitz <ogerlitz@...lanox.com>
Currently, we are emulating the offload of vlan push/pop actions using
global setup as done by commit f5f82476090f ("net/mlx5: E-Switch, Support
VLAN actions in the offloads mode"). With newer NICs, we can apply a flow
action for that matter, do that while keeping the emulated path for the
older HW brands.
Signed-off-by: Or Gerlitz <ogerlitz@...lanox.com>
Reviewed-by: Mark Bloch <markb@...lanox.com>
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 15 ++++++++-----
drivers/net/ethernet/mellanox/mlx5/core/eswitch.h | 10 ++++++++-
.../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 26 +++++++++++++++++-----
3 files changed, 40 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
index 7c33df2034f0..3e4a7e81b67f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -2530,12 +2530,17 @@ static int parse_tc_fdb_actions(struct mlx5e_priv *priv, struct tcf_exts *exts,
if (tcf_vlan_action(a) == TCA_VLAN_ACT_POP) {
attr->action |= MLX5_FLOW_CONTEXT_ACTION_VLAN_POP;
} else if (tcf_vlan_action(a) == TCA_VLAN_ACT_PUSH) {
- if (tcf_vlan_push_proto(a) != htons(ETH_P_8021Q) ||
- tcf_vlan_push_prio(a))
- return -EOPNOTSUPP;
-
attr->action |= MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH;
- attr->vlan = tcf_vlan_push_vid(a);
+ attr->vlan_vid = tcf_vlan_push_vid(a);
+ if (mlx5_eswitch_vlan_actions_supported(priv->mdev)) {
+ attr->vlan_prio = tcf_vlan_push_prio(a);
+ attr->vlan_proto = tcf_vlan_push_proto(a);
+ if (!attr->vlan_proto)
+ attr->vlan_proto = htons(ETH_P_8021Q);
+ } else if (tcf_vlan_push_proto(a) != htons(ETH_P_8021Q) ||
+ tcf_vlan_push_prio(a)) {
+ return -EOPNOTSUPP;
+ }
} else { /* action is TCA_VLAN_ACT_MODIFY */
return -EOPNOTSUPP;
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
index a435eb7971c6..4cd773fa55e3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.h
@@ -232,7 +232,9 @@ struct mlx5_esw_flow_attr {
struct mlx5_eswitch_rep *out_rep;
int action;
- u16 vlan;
+ __be16 vlan_proto;
+ u16 vlan_vid;
+ u8 vlan_prio;
bool vlan_handled;
u32 encap_id;
u32 mod_hdr_id;
@@ -255,6 +257,12 @@ int mlx5_eswitch_del_vlan_action(struct mlx5_eswitch *esw,
int __mlx5_eswitch_set_vport_vlan(struct mlx5_eswitch *esw,
int vport, u16 vlan, u8 qos, u8 set_flags);
+static inline bool mlx5_eswitch_vlan_actions_supported(struct mlx5_core_dev *dev)
+{
+ return MLX5_CAP_ESW_FLOWTABLE_FDB(dev, pop_vlan) &&
+ MLX5_CAP_ESW_FLOWTABLE_FDB(dev, push_vlan);
+}
+
#define MLX5_DEBUG_ESWITCH_MASK BIT(3)
#define esw_info(dev, format, ...) \
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
index 21ebe3e80e6e..35e256eb2f6e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -58,8 +58,16 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw,
if (esw->mode != SRIOV_OFFLOADS)
return ERR_PTR(-EOPNOTSUPP);
- /* per flow vlan pop/push is emulated, don't set that into the firmware */
- flow_act.action = attr->action & ~(MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH | MLX5_FLOW_CONTEXT_ACTION_VLAN_POP);
+ flow_act.action = attr->action;
+ /* if per flow vlan pop/push is emulated, don't set that into the firmware */
+ if (!mlx5_eswitch_vlan_actions_supported(esw->dev))
+ flow_act.action &= ~(MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH |
+ MLX5_FLOW_CONTEXT_ACTION_VLAN_POP);
+ else if (flow_act.action & MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH) {
+ flow_act.vlan.ethtype = ntohs(attr->vlan_proto);
+ flow_act.vlan.vid = attr->vlan_vid;
+ flow_act.vlan.prio = attr->vlan_prio;
+ }
if (flow_act.action & MLX5_FLOW_CONTEXT_ACTION_FWD_DEST) {
dest[i].type = MLX5_FLOW_DESTINATION_TYPE_VPORT;
@@ -185,7 +193,7 @@ static int esw_add_vlan_action_check(struct mlx5_esw_flow_attr *attr,
/* protects against (1) setting rules with different vlans to push and
* (2) setting rules w.o vlans (attr->vlan = 0) && w. vlans to push (!= 0)
*/
- if (push && in_rep->vlan_refcount && (in_rep->vlan != attr->vlan))
+ if (push && in_rep->vlan_refcount && (in_rep->vlan != attr->vlan_vid))
goto out_notsupp;
return 0;
@@ -202,6 +210,10 @@ int mlx5_eswitch_add_vlan_action(struct mlx5_eswitch *esw,
bool push, pop, fwd;
int err = 0;
+ /* nop if we're on the vlan push/pop non emulation mode */
+ if (mlx5_eswitch_vlan_actions_supported(esw->dev))
+ return 0;
+
push = !!(attr->action & MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH);
pop = !!(attr->action & MLX5_FLOW_CONTEXT_ACTION_VLAN_POP);
fwd = !!(attr->action & MLX5_FLOW_CONTEXT_ACTION_FWD_DEST);
@@ -239,11 +251,11 @@ int mlx5_eswitch_add_vlan_action(struct mlx5_eswitch *esw,
if (vport->vlan_refcount)
goto skip_set_push;
- err = __mlx5_eswitch_set_vport_vlan(esw, vport->vport, attr->vlan, 0,
+ err = __mlx5_eswitch_set_vport_vlan(esw, vport->vport, attr->vlan_vid, 0,
SET_VLAN_INSERT | SET_VLAN_STRIP);
if (err)
goto out;
- vport->vlan = attr->vlan;
+ vport->vlan = attr->vlan_vid;
skip_set_push:
vport->vlan_refcount++;
}
@@ -261,6 +273,10 @@ int mlx5_eswitch_del_vlan_action(struct mlx5_eswitch *esw,
bool push, pop, fwd;
int err = 0;
+ /* nop if we're on the vlan push/pop non emulation mode */
+ if (mlx5_eswitch_vlan_actions_supported(esw->dev))
+ return 0;
+
if (!attr->vlan_handled)
return 0;
--
2.14.3
Powered by blists - more mailing lists