[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <9016080b-2a98-dafb-0e27-6bad34f8ac64@mellanox.com>
Date: Sun, 25 Mar 2018 13:30:40 +0300
From: Gal Pressman <galp@...lanox.com>
To: Andrew Lunn <andrew@...n.ch>, Saeed Mahameed <saeedm@...lanox.com>
Cc: "David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org,
Inbar Karmy <inbark@...lanox.com>,
Michal Kubecek <mkubecek@...e.cz>
Subject: Re: [net-next 02/15] ethtool: Add support for configuring PFC stall
prevention in ethtool
On 24-Mar-18 17:57, Andrew Lunn wrote:
> On Fri, Mar 23, 2018 at 03:39:12PM -0700, Saeed Mahameed wrote:
>> From: Inbar Karmy <inbark@...lanox.com>
>>
>> In the event where the device unexpectedly becomes unresponsive
>> for a long period of time, flow control mechanism may propagate
>> pause frames which will cause congestion spreading to the entire
>> network.
>> To prevent this scenario, when the device is stalled for a period
>> longer than a pre-configured timeout, flow control mechanisms are
>> automatically disabled.
>>
>> This patch adds support for the ETHTOOL_PFC_STALL_PREVENTION
>> as a tunable.
>> This API provides support for configuring flow control storm prevention
>> timeout (msec).
>>
>> Signed-off-by: Inbar Karmy <inbark@...lanox.com>
>> Cc: Michal Kubecek <mkubecek@...e.cz>
>> Cc: Andrew Lunn <andrew@...n.ch>
>> Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
>> ---
>> include/uapi/linux/ethtool.h | 4 ++++
>> net/core/ethtool.c | 6 ++++++
>> 2 files changed, 10 insertions(+)
>>
>> diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
>> index 20da156aaf64..9dc63a14a747 100644
>> --- a/include/uapi/linux/ethtool.h
>> +++ b/include/uapi/linux/ethtool.h
>> @@ -217,10 +217,14 @@ struct ethtool_value {
>> __u32 data;
>> };
>>
>> +#define PFC_STORM_PREVENTION_AUTO 0xffff
>> +#define PFC_STORM_PREVENTION_DISABLE 0
>> +
>> enum tunable_id {
>> ETHTOOL_ID_UNSPEC,
>> ETHTOOL_RX_COPYBREAK,
>> ETHTOOL_TX_COPYBREAK,
>> + ETHTOOL_PFC_PREVENTION_TOUT,
>
> Hi Inbar
>
> Please could you add a comment here about the units. Ideally we want
> this file to be self documenting.
Thank you for the review, we will fix that.
>
> Andrew
>
Powered by blists - more mailing lists