lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Sun, 25 Mar 2018 23:43:13 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     David Miller <davem@...emloft.net>
Cc:     netdev <netdev@...r.kernel.org>, u.kleine-koenig@...gutronix.de,
        Andrew Lunn <andrew@...n.ch>
Subject: [PATCH v3 net-next 0/2] Fixes to allow mv88e6xxx module to be reloaded

As reported by Uwe Kleine-König, the interrupt trigger is first
configured by DT and then reconfigured to edge. This results in a
failure on EPROBE_DEFER, or if the module is unloaded and reloaded.

A second crash happens on module reload due to a missing call to the
common IRQ free code when using polled interrupts.

With these fixes in place, it becomes possible to load and unload the
kernel modules a few times without it crashing.

v2: Fix the ü in Künig a couple of times
v3: But the ü should be an ö!

Andrew Lunn (2):
  net: dsa: mv88e6xxx: Use the DT IRQ trigger mode
  net: dsa: mv88e6xxx: Call the common IRQ free code

 drivers/net/dsa/mv88e6xxx/chip.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

-- 
2.16.2

Powered by blists - more mailing lists