lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180326202842.GB5862@lunn.ch>
Date:   Mon, 26 Mar 2018 22:28:42 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     Murali Karicheri <m-karicheri2@...com>
Cc:     robh+dt@...nel.org, mark.rutland@....com, ssantosh@...nel.org,
        malat@...ian.org, w-kwok2@...com, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        davem@...emloft.net, netdev@...r.kernel.org
Subject: Re: [net-next PATCH 3/5] net: netcp: ethss enhancements to support
 2u cpsw h/w on K2G SoC

On Mon, Mar 26, 2018 at 04:15:10PM -0400, Murali Karicheri wrote:
> K2G SoC uses 2u cpsw h/w. It uses RGMII instead of SGMII to interface with
> Phy. This patch enhances the driver to check RGMII status instead of SGMII
> status for link state determination. Also map all of the vlan priorities
> to zero as the packet DMA is enabled to receive only flow id 0 which maps
> to priority zero.
> 
> Additionally, When a phy with rgmii interface requires internal delay, the
> same is set in the phy driver. To support such phy devices, add a phy-mode
> handling code in the driver using of_get_phy_mode() and pass the obtained
> phy mode to of_phy_connect()

Hi Murali

Please break this patch up. One patch should do one thing. That makes
it easy to review. There are too many things going on at once here.

   Andrew

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ