| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b9facd93-22fc-68ef-2928-3b1ba3493b82@mellanox.com>
Date: Thu, 29 Mar 2018 00:23:33 +0300
From: Tal Gilboa <talgi@...lanox.com>
To: Florian Fainelli <f.fainelli@...il.com>, netdev@...r.kernel.org
Cc: davem@...emloft.net, jaedon.shin@...il.com, pgynther@...gle.com,
opendmb@...il.com, Michael Chan <michael.chan@...adcom.com>,
gospo@...adcom.com, saeedm@...lanox.com
Subject: Re: [PATCH net-next 3/3] net: bcmgenet: Fix coalescing settings
handling
On 3/27/2018 10:47 PM, Florian Fainelli wrote:
> There were a number of issues with setting the RX coalescing parameters:
>
> - we would not be preserving values that would have been configured
> across close/open calls, instead we would always reset to no timeout
> and 1 interrupt per packet, this would also prevent DIM from setting its
> default usec/pkts values
>
> - when adaptive RX would be turned on, we woud not be fetching the
> default parameters, we would stay with no timeout/1 packet per interrupt
> until the estimator kicks in and changes that
>
> - finally disabling adaptive RX coalescing while providing parameters
> would not be honored, and we would stay with whatever DIM had previously
> determined instead of the user requested parameters
>
> Fixes: 9f4ca05827a2 ("net: bcmgenet: Add support for adaptive RX coalescing")
> Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
> ---
> drivers/net/ethernet/broadcom/genet/bcmgenet.c | 78 ++++++++++++++++++--------
> drivers/net/ethernet/broadcom/genet/bcmgenet.h | 4 +-
> 2 files changed, 57 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> index 7db8edc643ec..76409debb796 100644
> --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
> @@ -625,18 +625,18 @@ static int bcmgenet_get_coalesce(struct net_device *dev,
> return 0;
> }
>
> -static void bcmgenet_set_rx_coalesce(struct bcmgenet_rx_ring *ring)
> +static void bcmgenet_set_rx_coalesce(struct bcmgenet_rx_ring *ring,
> + u32 usecs, u32 pkts)
> {
> struct bcmgenet_priv *priv = ring->priv;
> unsigned int i = ring->index;
> u32 reg;
>
> - bcmgenet_rdma_ring_writel(priv, i, ring->dim.coal_pkts,
> - DMA_MBUF_DONE_THRESH);
> + bcmgenet_rdma_ring_writel(priv, i, pkts, DMA_MBUF_DONE_THRESH);
>
> reg = bcmgenet_rdma_readl(priv, DMA_RING0_TIMEOUT + i);
> reg &= ~DMA_TIMEOUT_MASK;
> - reg |= DIV_ROUND_UP(ring->dim.coal_usecs * 1000, 8192);
> + reg |= DIV_ROUND_UP(usecs * 1000, 8192);
> bcmgenet_rdma_writel(priv, reg, DMA_RING0_TIMEOUT + i);
> }
>
> @@ -645,6 +645,8 @@ static int bcmgenet_set_coalesce(struct net_device *dev,
> {
> struct bcmgenet_priv *priv = netdev_priv(dev);
> struct bcmgenet_rx_ring *ring;
> + struct net_dim_cq_moder moder;
> + u32 usecs, pkts;
> unsigned int i;
>
> /* Base system clock is 125Mhz, DMA timeout is this reference clock
> @@ -682,25 +684,37 @@ static int bcmgenet_set_coalesce(struct net_device *dev,
>
> for (i = 0; i < priv->hw_params->rx_queues; i++) {
> ring = &priv->rx_rings[i];
> - ring->dim.coal_usecs = ec->rx_coalesce_usecs;
> - ring->dim.coal_pkts = ec->rx_max_coalesced_frames;
> - if (!ec->use_adaptive_rx_coalesce && ring->dim.use_dim) {
> - ring->dim.coal_pkts = 1;
> - ring->dim.coal_usecs = 0;
> +
> + ring->rx_coalesce_usecs = ec->rx_coalesce_usecs;
> + ring->rx_max_coalesced_frames = ec->rx_max_coalesced_frames;
> + usecs = ring->rx_coalesce_usecs;
> + pkts = ring->rx_max_coalesced_frames;
> +
> + if (ec->use_adaptive_rx_coalesce) {
> + moder = net_dim_get_def_profile(ring->dim.dim.mode);
> + usecs = moder.usec;
> + pkts = moder.pkts;
> }
What if DIM is already in use? We don't want to set default values if
DIM is already working.
> +
> ring->dim.use_dim = ec->use_adaptive_rx_coalesce;
> - bcmgenet_set_rx_coalesce(ring);
> + bcmgenet_set_rx_coalesce(ring, usecs, pkts);
> }
>
> ring = &priv->rx_rings[DESC_INDEX];
> - ring->dim.coal_usecs = ec->rx_coalesce_usecs;
> - ring->dim.coal_pkts = ec->rx_max_coalesced_frames;
> - if (!ec->use_adaptive_rx_coalesce && ring->dim.use_dim) {
> - ring->dim.coal_pkts = 1;
> - ring->dim.coal_usecs = 0;
> +
> + ring->rx_coalesce_usecs = ec->rx_coalesce_usecs;
> + ring->rx_max_coalesced_frames = ec->rx_max_coalesced_frames;
> + usecs = ring->rx_coalesce_usecs;
> + pkts = ring->rx_max_coalesced_frames;
> +
> + if (ec->use_adaptive_rx_coalesce) {
> + moder = net_dim_get_def_profile(ring->dim.dim.mode);
> + usecs = moder.usec;
> + pkts = moder.pkts;
> }
Same as above.
> +
> ring->dim.use_dim = ec->use_adaptive_rx_coalesce;
> - bcmgenet_set_rx_coalesce(ring);
> + bcmgenet_set_rx_coalesce(ring, usecs, pkts);
>
> return 0;
> }
> @@ -1924,10 +1938,7 @@ static void bcmgenet_dim_work(struct work_struct *work)
> struct net_dim_cq_moder cur_profile =
> net_dim_get_profile(dim->mode, dim->profile_ix);
>
> - ring->dim.coal_usecs = cur_profile.usec;
> - ring->dim.coal_pkts = cur_profile.pkts;
> -
> - bcmgenet_set_rx_coalesce(ring);
> + bcmgenet_set_rx_coalesce(ring, cur_profile.usec, cur_profile.pkts);
> dim->state = NET_DIM_START_MEASURE;
> }
>
> @@ -2079,14 +2090,30 @@ static void init_umac(struct bcmgenet_priv *priv)
> dev_dbg(kdev, "done init umac\n");
> }
>
> -static void bcmgenet_init_dim(struct bcmgenet_net_dim *dim,
> +static void bcmgenet_init_dim(struct bcmgenet_rx_ring *ring,
> void (*cb)(struct work_struct *work))
> {
> + struct bcmgenet_net_dim *dim = &ring->dim;
> + struct net_dim_cq_moder moder;
> + u32 usecs, pkts;
> +
> INIT_WORK(&dim->dim.work, cb);
> dim->dim.mode = NET_DIM_CQ_PERIOD_MODE_START_FROM_EQE;
> dim->event_ctr = 0;
> dim->packets = 0;
> dim->bytes = 0;
I would expect only dim related code in a function called init_dim(). I
think the code below should be elsewhere. Or maybe change the function
name to init_rx_coalesce().
> +
> + usecs = ring->rx_coalesce_usecs;
> + pkts = ring->rx_max_coalesced_frames;
> +
> + /* If DIM was enabled, re-apply default parameters */
> + if (dim->use_dim) {
> + moder = net_dim_get_def_profile(dim->dim.mode);
> + usecs = moder.usec;
> + pkts = moder.pkts;
> + }
> +
> + bcmgenet_set_rx_coalesce(ring, usecs, pkts);
> }
>
> /* Initialize a Tx ring along with corresponding hardware registers */
> @@ -2178,7 +2205,7 @@ static int bcmgenet_init_rx_ring(struct bcmgenet_priv *priv,
> if (ret)
> return ret;
>
> - bcmgenet_init_dim(&ring->dim, bcmgenet_dim_work);
> + bcmgenet_init_dim(ring, bcmgenet_dim_work);
>
> /* Initialize Rx NAPI */
> netif_napi_add(priv->dev, &ring->napi, bcmgenet_rx_poll,
> @@ -2186,7 +2213,6 @@ static int bcmgenet_init_rx_ring(struct bcmgenet_priv *priv,
>
> bcmgenet_rdma_ring_writel(priv, index, 0, RDMA_PROD_INDEX);
> bcmgenet_rdma_ring_writel(priv, index, 0, RDMA_CONS_INDEX);
> - bcmgenet_rdma_ring_writel(priv, index, 1, DMA_MBUF_DONE_THRESH);
> bcmgenet_rdma_ring_writel(priv, index,
> ((size << DMA_RING_SIZE_SHIFT) |
> RX_BUF_LENGTH), DMA_RING_BUF_SIZE);
> @@ -3424,6 +3450,7 @@ static int bcmgenet_probe(struct platform_device *pdev)
> struct net_device *dev;
> const void *macaddr;
> struct resource *r;
> + unsigned int i;
> int err = -EIO;
> const char *phy_mode_str;
>
> @@ -3552,6 +3579,11 @@ static int bcmgenet_probe(struct platform_device *pdev)
> netif_set_real_num_tx_queues(priv->dev, priv->hw_params->tx_queues + 1);
> netif_set_real_num_rx_queues(priv->dev, priv->hw_params->rx_queues + 1);
>
> + /* Set default coalescing parameters */
> + for (i = 0; i < priv->hw_params->rx_queues; i++)
> + priv->rx_rings[i].rx_max_coalesced_frames = 1;
> + priv->rx_rings[DESC_INDEX].rx_max_coalesced_frames = 1;
> +
> /* libphy will determine the link state */
> netif_carrier_off(dev);
>
> diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
> index 22c41e0430fb..b773bc07edf7 100644
> --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
> +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
> @@ -578,8 +578,6 @@ struct bcmgenet_net_dim {
> u16 event_ctr;
> unsigned long packets;
> unsigned long bytes;
> - u32 coal_usecs;
> - u32 coal_pkts;
> struct net_dim dim;
> };
>
> @@ -598,6 +596,8 @@ struct bcmgenet_rx_ring {
> unsigned int end_ptr; /* Rx ring end CB ptr */
> unsigned int old_discards;
> struct bcmgenet_net_dim dim;
> + u32 rx_max_coalesced_frames;
> + u32 rx_coalesce_usecs;
> void (*int_enable)(struct bcmgenet_rx_ring *);
> void (*int_disable)(struct bcmgenet_rx_ring *);
> struct bcmgenet_priv *priv;
>
Powered by blists - more mailing lists