netdev - Re: [PATCH] fix typo in command value in drivers/net/phy/mdio-bitbang.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Date:   Fri, 30 Mar 2018 16:14:09 +0200
From:   Andrew Lunn <andrew@...n.ch>
To:     Frans Meulenbroeks <fransmeulenbroeks@...il.com>
Cc:     torvalds@...ux-foundation.org, linux-kernel@...r.kernel.org,
        netdev <netdev@...r.kernel.org>
Subject: Re: [PATCH] fix typo in command value in
 drivers/net/phy/mdio-bitbang.

On Fri, Mar 30, 2018 at 02:03:38PM +0200, Frans Meulenbroeks wrote:
> mdio-bitbang mentioned 10 for both read and write.
> However mdio read opcode is 10 and write opcode is 01
> Fixed comment.
> 
> Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@...il.com>

Hi Frans

The correct place to send this patch is <netdev@...r.kernel.org> and
David Miller <davem@...emloft.net>. Please can you submit it again, to
these addresses.

In general, if you don't know where to send a patch,
scripts/get_maintainers.pl will tell you.

Reviewed-by: Andrew Lunn <andrew@...n.ch>

    Andrew


> ---
>  drivers/net/phy/mdio-bitbang.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/phy/mdio-bitbang.c b/drivers/net/phy/mdio-bitbang.c
> index 61a543c..403b085 100644
> --- a/drivers/net/phy/mdio-bitbang.c
> +++ b/drivers/net/phy/mdio-bitbang.c
> @@ -113,7 +113,7 @@ static void mdiobb_cmd(struct mdiobb_ctrl *ctrl, int
> op, u8 phy, u8 reg)
>         for (i = 0; i < 32; i++)
>                 mdiobb_send_bit(ctrl, 1);
> 
> -       /* send the start bit (01) and the read opcode (10) or write (10).
> +       /* send the start bit (01) and the read opcode (10) or write (01).
>            Clause 45 operation uses 00 for the start and 11, 10 for
>            read/write */
>         mdiobb_send_bit(ctrl, 0);
> -- 
> 2.7.4