[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGb2v679OxYOFxz6pHa9W11EVa9ZYD6N3HfdjaTPpKkVe5qngg@mail.gmail.com>
Date: Fri, 30 Mar 2018 17:13:31 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Sergei Shtylyov <sergei.shtylyov@...entembedded.com>
Cc: Maxime Ripard <maxime.ripard@...tlin.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Mark Brown <broonie@...nel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-clk <linux-clk@...r.kernel.org>,
devicetree <devicetree@...r.kernel.org>,
netdev <netdev@...r.kernel.org>,
Corentin Labbe <clabbe.montjoie@...il.com>,
Icenowy Zheng <icenowy@...c.io>
Subject: Re: [PATCH net-next 03/12] dt-bindings: net: dwmac-sun8i: Clean up
clock delay chain descriptions
On Sun, Mar 18, 2018 at 5:21 PM, Sergei Shtylyov
<sergei.shtylyov@...entembedded.com> wrote:
> Hello!
>
>
> On 3/17/2018 12:28 PM, Chen-Yu Tsai wrote:
>
>> The clock delay chains found in the glue layer for dwmac-sun8i are only
>> used with RGMII PHYs. They are not intended for non-RGMII PHYs, such as
>> MII external PHYs or the internal PHY. Also, a recent SoC has a smaller
>> range of possible values for the delay chain.
>>
>> This patch reformats the delay chain section of the device tree binding
>> to make it clear that the delay chains only apply to RGMII PHYs, and
>> make it easier to add the R40-specific bits later.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@...e.org>
>> ---
>> Documentation/devicetree/bindings/net/dwmac-sun8i.txt | 11 +++++++----
>> 1 file changed, 7 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
>> b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
>> index 3d6d5fa0c4d5..b8a3028d6c30 100644
>> --- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
>> +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
>> @@ -28,10 +28,13 @@ Required properties:
>> - allwinner,sun8i-a83t-system-controller
>> Optional properties:
>> -- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is
>> 0-700. Default is 0)
>> -- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is
>> 0-3100. Default is 0)
>> -Both delay properties need to be a multiple of 100. They control the
>> delay for
>> -external PHY.
>> +- allwinner,tx-delay-ps: TX clock delay chain value in ps.
>> + Range is 0-700. Default is 0.
>> +- allwinner,rx-delay-ps: RX clock delay chain value in ps.
>> + Range is 0-3100. Default is 0.
>> +Both delay properties need to be a multiple of 100. They control the
>> +clock delay for external RGMII PHY. They are do apply to the internal
>
>
> s/are do/do not/?
Fixed. Thanks!
ChenYu
Powered by blists - more mailing lists