[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180411072450.9809-4-raghuramchary.jallipalli@microchip.com>
Date: Wed, 11 Apr 2018 12:54:50 +0530
From: Raghuram Chary J <raghuramchary.jallipalli@...rochip.com>
To: <davem@...emloft.net>
CC: <netdev@...r.kernel.org>, <unglinuxdriver@...rochip.com>,
<woojung.huh@...rochip.com>,
<raghuramchary.jallipalli@...rochip.com>
Subject: [PATCH v1 net 3/3] lan78xx: Lan7801 Support for Fixed PHY
Adding Fixed PHY support to the lan78xx driver.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Raghuram Chary J <raghuramchary.jallipalli@...rochip.com>
---
drivers/net/usb/Kconfig | 1 +
drivers/net/usb/lan78xx.c | 42 ++++++++++++++++++++++++++++++++++++++----
2 files changed, 39 insertions(+), 4 deletions(-)
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index f28bd74ac275..418b0904cecb 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -111,6 +111,7 @@ config USB_LAN78XX
select MII
select PHYLIB
select MICROCHIP_PHY
+ select FIXED_PHY
help
This option adds support for Microchip LAN78XX based USB 2
& USB 3 10/100/1000 Ethernet adapters.
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index cbeec784f8b8..0c87ac1b767f 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -36,7 +36,7 @@
#include <linux/irq.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/microchipphy.h>
-#include <linux/phy.h>
+#include <linux/phy_fixed.h>
#include "lan78xx.h"
#define DRIVER_AUTHOR "WOOJUNG HUH <woojung.huh@...rochip.com>"
@@ -426,6 +426,7 @@ struct lan78xx_net {
struct statstage stats;
struct irq_domain_data domain_data;
+ struct phy_device *fixedphy;
};
/* define external phy id */
@@ -2061,11 +2062,39 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
int ret;
u32 mii_adv;
struct phy_device *phydev;
+ struct fixed_phy_status fphy_status = {
+ .link = 1,
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+ };
phydev = phy_find_first(dev->mdiobus);
if (!phydev) {
- netdev_err(dev->net, "no PHY found\n");
- return -EIO;
+ if (dev->chipid == ID_REV_CHIP_ID_7801_) {
+ u32 buf;
+
+ netdev_info(dev->net, "PHY Not Found!! Registering Fixed PHY\n");
+ phydev = fixed_phy_register(PHY_POLL, &fphy_status, -1,
+ NULL);
+ if (IS_ERR(phydev)) {
+ netdev_err(dev->net, "No PHY/fixed_PHY found\n");
+ return -ENODEV;
+ }
+ netdev_info(dev->net, "Registered FIXED PHY\n");
+ dev->interface = PHY_INTERFACE_MODE_RGMII;
+ dev->fixedphy = phydev;
+ ret = lan78xx_write_reg(dev, MAC_RGMII_ID,
+ MAC_RGMII_ID_TXC_DELAY_EN_);
+ ret = lan78xx_write_reg(dev, RGMII_TX_BYP_DLL, 0x3D00);
+ ret = lan78xx_read_reg(dev, HW_CFG, &buf);
+ buf |= HW_CFG_CLK125_EN_;
+ buf |= HW_CFG_REFCLK25_EN_;
+ ret = lan78xx_write_reg(dev, HW_CFG, buf);
+ goto phyinit;
+ } else {
+ netdev_err(dev->net, "no PHY found\n");
+ return -EIO;
+ }
}
if ((dev->chipid == ID_REV_CHIP_ID_7800_) ||
@@ -2103,7 +2132,7 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
ret = -EIO;
goto error;
}
-
+phyinit:
/* if phyirq is not set, use polling mode in phylib */
if (dev->domain_data.phyirq > 0)
phydev->irq = dev->domain_data.phyirq;
@@ -3562,6 +3591,11 @@ static void lan78xx_disconnect(struct usb_interface *intf)
udev = interface_to_usbdev(intf);
net = dev->net;
+
+ if (dev->fixedphy) {
+ fixed_phy_unregister(dev->fixedphy);
+ dev->fixedphy = NULL;
+ }
unregister_netdev(net);
cancel_delayed_work_sync(&dev->wq);
--
2.16.2
Powered by blists - more mailing lists