[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180417193327.41a3ff9a@cakuba.netronome.com>
Date: Tue, 17 Apr 2018 19:33:27 -0700
From: Jakub Kicinski <jakub.kicinski@...ronome.com>
To: Bjorn Helgaas <helgaas@...nel.org>
Cc: oss-drivers@...ronome.com, Tal Gilboa <talgi@...lanox.com>,
Tariq Toukan <tariqt@...lanox.com>,
Jacob Keller <jacob.e.keller@...el.com>,
Ganesh Goudar <ganeshgr@...lsio.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
intel-wired-lan@...ts.osuosl.org, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org
Subject: Re: [PATCH] PCI: Add PCIe to pcie_print_link_status() messages
On Fri, 13 Apr 2018 11:16:38 -0700, Jakub Kicinski wrote:
> Currently the pcie_print_link_status() will print PCIe bandwidth
> and link width information but does not mention it is pertaining
> to the PCIe. Since this and related functions are used exclusively
> by networking drivers today users may get confused into thinking
> that it's the NIC bandwidth that is being talked about. Insert a
> "PCIe" into the messages.
>
> Signed-off-by: Jakub Kicinski <jakub.kicinski@...ronome.com>
Hi Bjorn!
Could this small change still make it into 4.17 or are you planning to
apply it in 4.18 cycle? IMHO the message clarification may be worth
considering for 4.17..
> drivers/pci/pci.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index aa86e904f93c..73a0a4993f6a 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -5273,11 +5273,11 @@ void pcie_print_link_status(struct pci_dev *dev)
> bw_avail = pcie_bandwidth_available(dev, &limiting_dev, &speed, &width);
>
> if (bw_avail >= bw_cap)
> - pci_info(dev, "%u.%03u Gb/s available bandwidth (%s x%d link)\n",
> + pci_info(dev, "%u.%03u Gb/s available PCIe bandwidth (%s x%d link)\n",
> bw_cap / 1000, bw_cap % 1000,
> PCIE_SPEED2STR(speed_cap), width_cap);
> else
> - pci_info(dev, "%u.%03u Gb/s available bandwidth, limited by %s x%d link at %s (capable of %u.%03u Gb/s with %s x%d link)\n",
> + pci_info(dev, "%u.%03u Gb/s available PCIe bandwidth, limited by %s x%d link at %s (capable of %u.%03u Gb/s with %s x%d link)\n",
> bw_avail / 1000, bw_avail % 1000,
> PCIE_SPEED2STR(speed), width,
> limiting_dev ? pci_name(limiting_dev) : "<unknown>",
Powered by blists - more mailing lists