netdev - RE: [PATCH] net: phy: marvell: clear wol event before setting it

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 19 Apr 2018 08:38:45 +0000
From:   Bhadram Varka <vbhadram@...dia.com>
To:     Jisheng Zhang <Jisheng.Zhang@...aptics.com>,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        "David S. Miller" <davem@...emloft.net>
CC:     "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Jingju Hou <Jingju.Hou@...aptics.com>
Subject: RE: [PATCH] net: phy: marvell: clear wol event before setting it

Hi,

> -----Original Message-----
> From: netdev-owner@...r.kernel.org <netdev-owner@...r.kernel.org> On
> Behalf Of Jisheng Zhang
> Sent: Thursday, April 19, 2018 1:33 PM
> To: Andrew Lunn <andrew@...n.ch>; Florian Fainelli <f.fainelli@...il.com>;
> David S. Miller <davem@...emloft.net>
> Cc: netdev@...r.kernel.org; linux-kernel@...r.kernel.org; Jingju Hou
> <Jingju.Hou@...aptics.com>
> Subject: [PATCH] net: phy: marvell: clear wol event before setting it
> 
> From: Jingju Hou <Jingju.Hou@...aptics.com>
> 
> If WOL event happened once, the LED[2] interrupt pin will not be cleared unless
> reading the CSISR register. So clear the WOL event before enabling it.
> 
> Signed-off-by: Jingju Hou <Jingju.Hou@...aptics.com>
> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@...aptics.com>
> ---
>  drivers/net/phy/marvell.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index
> c22e8e383247..b6abe1cbc84b 100644
> --- a/drivers/net/phy/marvell.c
> +++ b/drivers/net/phy/marvell.c
> @@ -115,6 +115,9 @@
>  /* WOL Event Interrupt Enable */
>  #define MII_88E1318S_PHY_CSIER_WOL_EIE			BIT(7)
> 
> +/* Copper Specific Interrupt Status Register */
> +#define MII_88E1318S_PHY_CSISR				0x13
> +

There is already macro to represent this register - MII_M1011_IEVENT. Do we need this macro ?

>  /* LED Timer Control Register */
>  #define MII_88E1318S_PHY_LED_TCR			0x12
>  #define MII_88E1318S_PHY_LED_TCR_FORCE_INT		BIT(15)
> @@ -1393,6 +1396,12 @@ static int m88e1318_set_wol(struct phy_device
> *phydev,
>  		if (err < 0)
>  			goto error;
> 
> +		/* If WOL event happened once, the LED[2] interrupt pin
> +		 * will not be cleared unless reading the CSISR register.
> +		 * So clear the WOL event first before enabling it.
> +		 */
> +		phy_read(phydev, MII_88E1318S_PHY_CSISR);

This part of the operation already taken care by ack_interrupt and did_interrupt
[....]
.ack_interrupt = &marvell_ack_interrupt,
.did_interrupt = &m88e1121_did_interrupt,
[...]

If at all WOL event occurred marvell_ack_interrupt will take care of clearing the interrupt status register.
Am I missing anything here ?

>  		/* Enable the WOL interrupt */
>  		err = __phy_modify(phydev, MII_88E1318S_PHY_CSIER, 0,
>  				   MII_88E1318S_PHY_CSIER_WOL_EIE);
> --
> 2.17.0