netdev - Re: [PATCH v4 00/10] New network driver for Amiga X-Surf 100 (m68k)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <cb6edb7a-ef48-deb3-3b03-c7e91831173a@gmail.com>
Date:   Thu, 19 Apr 2018 15:17:28 +1200
From:   Michael Schmitz <schmitzmic@...il.com>
To:     netdev@...r.kernel.org
Cc:     andrew@...n.ch, fthain@...egraphics.com.au, geert@...ux-m68k.org,
        f.fainelli@...il.com, linux-m68k@...r.kernel.org,
        Michael.Karcher@...berlin.de
Subject: Re: [PATCH v4 00/10] New network driver for Amiga X-Surf 100 (m68k)

Hi,

messed up the subject there, sorry - this was meant to be

[PATCH v4 0/9] net-next: New network driver for Amiga X-Surf 100 (m68k)

Cheers,

	Michael


Am 19.04.2018 um 14:05 schrieb Michael Schmitz:
> [This is a resend of my v3 series which was based on the wrong version and
> tree. Only substantial change is to Asix AX99796B PHY driver.]
> 
> This patch series adds support for the Individual Computers X-Surf 100
> network card for m68k Amiga, a network adapter based on the AX88796 chip set.
> 
> The driver was originally written for kernel version 3.19 by Michael Karcher
> (see CC:), and adapted to 4.16+ for submission to netdev by me. Questions
> regarding motivation for some of the changes are probably best directed at
> Michael Karcher.
> 
> The driver has been tested by Adrian <glaubitz@...sik.fu-berlin.de> who will
> send his Tested-by tag separately.
> 
> A few changes to the ax88796 driver were required:
> - to read the MAC address, some setup of the ax99796 chip must be done,
> - attach to the MII bus only on device open to allow module unloading,
> - allow to supersede ax_block_input/ax_block_output by card-specific
>   optimized code,
> - use an optional interrupt status callback to allow easier sharing of the
>   card interrupt,
> - set IRQF_SHARED if platform IRQ resource is marked shareable
> 
> The Asix Electronix PHY used on the X-Surf 100 is buggy, and causes the
> software reset to hang if the previous command sent to the PHY was also
> a soft reset. This bug requires addition of a PHY driver for Asix PHYs
> to provide a fixed .soft_reset function, included in this series.
> 
> Some additional cleanup:
> - do not attempt to free IRQ in ax_remove (complements 82533ad9a1c),
> - clear platform drvdata on probe fail and module remove.
> 
> Changes since v1:
> 
> Raised in review by Andrew Lunn:
> - move MII code around to avoid need for forward declaration,
> - combine patches 2 and 7 to add cleanup in error path
> 
> Changes since v2:
> 
> - corrected authorship attribution to Michael Karcher
> 
> Suggested by Geert Uytterhoeven:
> - use ei_local->reset_8390() instead of duplicating ax_reset_8390(),
> - use %pR to format struct resource pointers,
> - assign pdev and xs100 pointers in declaration,
> - don't split error messages,
> - change Kconfig logic to only require XSURF100 set on Amiga
> 
> Suggested by Andrew Lunn:
> - add COMPILE_TEST to ax88796 Kconfig options,
> - use new Asix PHY driver for X-Surf 100
> 
> Suggested by Andrew Lunn/Finn Thain:
> - declare struct sk_buff in ax88796.h,
> - correct whitespace error in ax88796.h
> 
> Changes since v3:
> 
> - various checkpatch cleanup
> 
> Andrew Lunn:
> - don't duplicate genphy_soft_reset in Asix PHY driver, just call 
>   genphy_soft_reset after writing zero to control register
> 
> This series' patches, in order:
> 
> 1/9 net-next: phy: new Asix Electronics PHY driver
> 2/9 net-next: ax88796: Fix MAC address reading
> 3/9 net-next: ax88796: Attach MII bus only when open
> 4/9 net-next: ax88796: Do not free IRQ in ax_remove() (already freed in ax_close()).
> 5/9 net-next: ax88796: Add block_input/output hooks to ax_plat_data
> 6/9 net-next: ax88796: add interrupt status callback to platform data
> 7/9 net-next: ax88796: set IRQF_SHARED flag when IRQ resource is marked as shareable
> 8/9 net-next: ax88796: release platform device drvdata on probe error and module remove
> 9/9 net-next: New ax88796 platform driver for Amiga X-Surf 100 Zorro board (m68k)
> 
>  drivers/net/ethernet/8390/Kconfig    |   17 ++-
>  drivers/net/ethernet/8390/Makefile   |    1 +
>  drivers/net/ethernet/8390/ax88796.c  |  228 ++++++++++++--------
>  drivers/net/ethernet/8390/xsurf100.c |  382 ++++++++++++++++++++++++++++++++++
>  drivers/net/phy/Kconfig              |    6 +
>  drivers/net/phy/Makefile             |    1 +
>  drivers/net/phy/asix.c               |   63 ++++++
>  include/net/ax88796.h                |   14 ++
>  8 files changed, 617 insertions(+), 95 deletions(-)
> 
> Cheers,
> 
> 	Michael
>