lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180425182232.28935-9-jeffrey.t.kirsher@intel.com>
Date:   Wed, 25 Apr 2018 11:22:30 -0700
From:   Jeff Kirsher <jeffrey.t.kirsher@...el.com>
To:     davem@...emloft.net
Cc:     Vinicius Costa Gomes <vinicius.gomes@...el.com>,
        netdev@...r.kernel.org, nhorman@...hat.com, sassmann@...hat.com,
        jogreene@...hat.com, Jeff Kirsher <jeffrey.t.kirsher@...el.com>
Subject: [net-next 08/10] igb: Add MAC address support for ethtool nftuple filters

From: Vinicius Costa Gomes <vinicius.gomes@...el.com>

This adds the capability of configuring the queue steering of arriving
packets based on their source and destination MAC addresses.

Source address steering (i.e. driving traffic to a specific queue),
for the i210, does not work, but filtering does (i.e. accepting
traffic based on the source address). So, trying to add a filter
specifying only a source address will be an error.

In practical terms this adds support for the following use cases,
characterized by these examples:

$ ethtool -N eth0 flow-type ether dst aa:aa:aa:aa:aa:aa action 0
(this will direct packets with destination address "aa:aa:aa:aa:aa:aa"
to the RX queue 0)

$ ethtool -N eth0 flow-type ether src 44:44:44:44:44:44 \
  	     	  	    	  proto 0x22f0 action 3
(this will direct packets with source address "44:44:44:44:44:44" and
ethertype 0x22f0 to the RX queue 3)

Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@...el.com>
Tested-by: Aaron Brown <aaron.f.brown@...el.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@...el.com>
---
 drivers/net/ethernet/intel/igb/igb_ethtool.c | 43 +++++++++++++++++++++++++---
 1 file changed, 39 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index 31b2960a7869..6697c273ab59 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -2495,6 +2495,23 @@ static int igb_get_ethtool_nfc_entry(struct igb_adapter *adapter,
 			fsp->h_ext.vlan_tci = rule->filter.vlan_tci;
 			fsp->m_ext.vlan_tci = htons(VLAN_PRIO_MASK);
 		}
+		if (rule->filter.match_flags & IGB_FILTER_FLAG_DST_MAC_ADDR) {
+			ether_addr_copy(fsp->h_u.ether_spec.h_dest,
+					rule->filter.dst_addr);
+			/* As we only support matching by the full
+			 * mask, return the mask to userspace
+			 */
+			eth_broadcast_addr(fsp->m_u.ether_spec.h_dest);
+		}
+		if (rule->filter.match_flags & IGB_FILTER_FLAG_SRC_MAC_ADDR) {
+			ether_addr_copy(fsp->h_u.ether_spec.h_source,
+					rule->filter.src_addr);
+			/* As we only support matching by the full
+			 * mask, return the mask to userspace
+			 */
+			eth_broadcast_addr(fsp->m_u.ether_spec.h_source);
+		}
+
 		return 0;
 	}
 	return -EINVAL;
@@ -2768,8 +2785,16 @@ static int igb_rxnfc_write_vlan_prio_filter(struct igb_adapter *adapter,
 
 int igb_add_filter(struct igb_adapter *adapter, struct igb_nfc_filter *input)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	int err = -EINVAL;
 
+	if (hw->mac.type == e1000_i210 &&
+	    !(input->filter.match_flags & ~IGB_FILTER_FLAG_SRC_MAC_ADDR)) {
+		dev_err(&adapter->pdev->dev,
+			"i210 doesn't support flow classification rules specifying only source addresses.\n");
+		return -EOPNOTSUPP;
+	}
+
 	if (input->filter.match_flags & IGB_FILTER_FLAG_ETHER_TYPE) {
 		err = igb_rxnfc_write_etype_filter(adapter, input);
 		if (err)
@@ -2933,10 +2958,6 @@ static int igb_add_ethtool_nfc_entry(struct igb_adapter *adapter,
 	if ((fsp->flow_type & ~FLOW_EXT) != ETHER_FLOW)
 		return -EINVAL;
 
-	if (fsp->m_u.ether_spec.h_proto != ETHER_TYPE_FULL_MASK &&
-	    fsp->m_ext.vlan_tci != htons(VLAN_PRIO_MASK))
-		return -EINVAL;
-
 	input = kzalloc(sizeof(*input), GFP_KERNEL);
 	if (!input)
 		return -ENOMEM;
@@ -2946,6 +2967,20 @@ static int igb_add_ethtool_nfc_entry(struct igb_adapter *adapter,
 		input->filter.match_flags = IGB_FILTER_FLAG_ETHER_TYPE;
 	}
 
+	/* Only support matching addresses by the full mask */
+	if (is_broadcast_ether_addr(fsp->m_u.ether_spec.h_source)) {
+		input->filter.match_flags |= IGB_FILTER_FLAG_SRC_MAC_ADDR;
+		ether_addr_copy(input->filter.src_addr,
+				fsp->h_u.ether_spec.h_source);
+	}
+
+	/* Only support matching addresses by the full mask */
+	if (is_broadcast_ether_addr(fsp->m_u.ether_spec.h_dest)) {
+		input->filter.match_flags |= IGB_FILTER_FLAG_DST_MAC_ADDR;
+		ether_addr_copy(input->filter.dst_addr,
+				fsp->h_u.ether_spec.h_dest);
+	}
+
 	if ((fsp->flow_type & FLOW_EXT) && fsp->m_ext.vlan_tci) {
 		if (fsp->m_ext.vlan_tci != htons(VLAN_PRIO_MASK)) {
 			err = -EINVAL;
-- 
2.14.3

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ