| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1524732426.4026.84.camel@baylibre.com>
Date: Thu, 26 Apr 2018 10:47:06 +0200
From: Jerome Brunet <jbrunet@...libre.com>
To: Yixun Lan <yixun.lan@...ogic.com>,
"David S. Miller" <davem@...emloft.net>, netdev@...r.kernel.org
Cc: Kevin Hilman <khilman@...libre.com>,
Carlo Caione <carlo@...one.org>, Rob Herring <robh@...nel.org>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] net: stmmac: dwmac-meson: extend phy mode setting
On Thu, 2018-04-26 at 16:05 +0000, Yixun Lan wrote:
> In the Meson-AXG SoC, the phy mode setting of PRG_ETH0 in the glue layer
> is extended from bit[0] to bit[2:0].
> There is no problem if we configure it to the RGMII 1000M PHY mode,
> since the register setting is coincidentally compatible with previous one,
> but for the RMII 100M PHY mode, the configuration need to be changed to
> value - b100.
> This patch was verified with a RTL8201F 100M ethernet PHY.
>
> Signed-off-by: Yixun Lan <yixun.lan@...ogic.com>
> ---
> .../ethernet/stmicro/stmmac/dwmac-meson8b.c | 95 ++++++++++++++++---
> 1 file changed, 84 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
> index 7cb794094a70..e3688b6dd87c 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
> @@ -18,6 +18,7 @@
> #include <linux/io.h>
> #include <linux/ioport.h>
> #include <linux/module.h>
> +#include <linux/of_device.h>
> #include <linux/of_net.h>
> #include <linux/mfd/syscon.h>
> #include <linux/platform_device.h>
> @@ -29,6 +30,10 @@
>
> #define PRG_ETH0_RGMII_MODE BIT(0)
>
> +#define PRG_ETH0_EXT_PHY_MODE_MASK GENMASK(2, 0)
> +#define PRG_ETH0_EXT_RGMII_MODE 1
> +#define PRG_ETH0_EXT_RMII_MODE 4
> +
> /* mux to choose between fclk_div2 (bit unset) and mpll2 (bit set) */
> #define PRG_ETH0_CLK_M250_SEL_SHIFT 4
> #define PRG_ETH0_CLK_M250_SEL_MASK GENMASK(4, 4)
> @@ -46,10 +51,16 @@
> #define PRG_ETH0_TX_AND_PHY_REF_CLK BIT(12)
>
> #define MUX_CLK_NUM_PARENTS 2
> +struct meson8b_dwmac_data {
> + bool ext_phy_mode;
> +};
>
> struct meson8b_dwmac {
> struct device *dev;
> void __iomem *regs;
> +
> + const struct meson8b_dwmac_data *data;
> +
> phy_interface_t phy_mode;
> struct clk *rgmii_tx_clk;
> u32 tx_delay_ns;
> @@ -171,6 +182,46 @@ static int meson8b_init_rgmii_tx_clk(struct meson8b_dwmac *dwmac)
> return 0;
> }
>
> +static int meson8b_init_set_mode(struct meson8b_dwmac *dwmac)
> +{
> + bool ext_phy_mode = dwmac->data->ext_phy_mode;
> +
> + switch (dwmac->phy_mode) {
> + case PHY_INTERFACE_MODE_RGMII:
> + case PHY_INTERFACE_MODE_RGMII_RXID:
> + case PHY_INTERFACE_MODE_RGMII_ID:
> + case PHY_INTERFACE_MODE_RGMII_TXID:
> + /* enable RGMII mode */
> + if (ext_phy_mode)
Looks weird to have this if target at a specific SoC withing a function named
after another SoC
Couldn't you make one function per soc type, and pass that function pointer in
the match data ?
> + meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
> + PRG_ETH0_EXT_PHY_MODE_MASK,
> + PRG_ETH0_EXT_RGMII_MODE);
> + else
> + meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
> + PRG_ETH0_RGMII_MODE,
> + PRG_ETH0_RGMII_MODE);
> +
> + break;
> + case PHY_INTERFACE_MODE_RMII:
> + /* disable RGMII mode -> enables RMII mode */
> + if (ext_phy_mode)
> + meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
> + PRG_ETH0_EXT_PHY_MODE_MASK,
> + PRG_ETH0_EXT_RMII_MODE);
> + else
> + meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
> + PRG_ETH0_RGMII_MODE, 0);
> +
> + break;
> + default:
> + dev_err(dwmac->dev, "fail to set phy-mode %s\n",
> + phy_modes(dwmac->phy_mode));
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
> {
> int ret;
> @@ -188,10 +239,6 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
>
> case PHY_INTERFACE_MODE_RGMII_ID:
> case PHY_INTERFACE_MODE_RGMII_TXID:
> - /* enable RGMII mode */
> - meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
> - PRG_ETH0_RGMII_MODE);
> -
> /* only relevant for RMII mode -> disable in RGMII mode */
> meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
> PRG_ETH0_INVERTED_RMII_CLK, 0);
> @@ -224,10 +271,6 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
> break;
>
> case PHY_INTERFACE_MODE_RMII:
> - /* disable RGMII mode -> enables RMII mode */
> - meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
> - 0);
> -
> /* invert internal clk_rmii_i to generate 25/2.5 tx_rx_clk */
> meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
> PRG_ETH0_INVERTED_RMII_CLK,
> @@ -274,6 +317,11 @@ static int meson8b_dwmac_probe(struct platform_device *pdev)
> goto err_remove_config_dt;
> }
>
> + dwmac->data = (const struct meson8b_dwmac_data *)
> + of_device_get_match_data(&pdev->dev);
> + if (!dwmac->data)
> + return -EINVAL;
> +
> res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> dwmac->regs = devm_ioremap_resource(&pdev->dev, res);
> if (IS_ERR(dwmac->regs)) {
> @@ -298,6 +346,10 @@ static int meson8b_dwmac_probe(struct platform_device *pdev)
> if (ret)
> goto err_remove_config_dt;
>
> + ret = meson8b_init_set_mode(dwmac);
> + if (ret)
> + goto err_remove_config_dt;
> +
> ret = meson8b_init_prg_eth(dwmac);
> if (ret)
> goto err_remove_config_dt;
> @@ -316,10 +368,31 @@ static int meson8b_dwmac_probe(struct platform_device *pdev)
> return ret;
> }
>
> +static const struct meson8b_dwmac_data meson8b_dwmac_data = {
> + .ext_phy_mode = false,
> +};
> +
> +static const struct meson8b_dwmac_data meson_axg_dwmac_data = {
> + .ext_phy_mode = true,
> +};
> +
> static const struct of_device_id meson8b_dwmac_match[] = {
> - { .compatible = "amlogic,meson8b-dwmac" },
> - { .compatible = "amlogic,meson8m2-dwmac" },
> - { .compatible = "amlogic,meson-gxbb-dwmac" },
> + {
> + .compatible = "amlogic,meson8b-dwmac",
> + .data = &meson8b_dwmac_data,
> + },
> + {
> + .compatible = "amlogic,meson8m2-dwmac",
> + .data = &meson8b_dwmac_data,
> + },
> + {
> + .compatible = "amlogic,meson-gxbb-dwmac",
> + .data = &meson8b_dwmac_data,
> + },
> + {
> + .compatible = "amlogic,meson-axg-dwmac",
> + .data = &meson_axg_dwmac_data,
> + },
> { }
> };
> MODULE_DEVICE_TABLE(of, meson8b_dwmac_match);
Powered by blists - more mailing lists