[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1525270723-18241-1-git-send-email-christophe.roullier@st.com>
Date: Wed, 2 May 2018 16:18:35 +0200
From: Christophe Roullier <christophe.roullier@...com>
To: <mark.rutland@....com>, <mcoquelin.stm32@...il.com>,
<alexandre.torgue@...com>, <peppe.cavallaro@...com>
CC: <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <netdev@...r.kernel.org>,
<christophe.roullier@...com>, <andrew@...n.ch>
Subject: [PATCH V2 0/8] net: ethernet: stmmac: add support for stm32mp1
Patches to have Ethernet support on stm32mp1
Changelog:
Remark from Andrew Lunn
In drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
Add support of PHY_INTERFACE_MODE_RGMII_ID, PHY_INTERFACE_MODE_RGMII_RXID,
PHY_INTERFACE_MODE_RGMII_TXID.
Remark from Rob Herring
In arch/arm/boot/dts/stm32mp157-pinctrl.dtsi:
Replace @0 with -0
In Documentation/devicetree/bindings/arm/stm32.txt
.../devicetree/bindings/net/stm32-dwmac.txt
Update with requirement of Rob
In arch/arm/boot/dts/stm32mp157c.dtsi:
Remove compatible "st,stm32-syscfg" and use only generic "syscon"
Christophe Roullier (8):
net: ethernet: stmmac: add adaptation for stm32mp157c.
dt-bindings: stm32-dwmac: add support of MPU families
ARM: dts: stm32: add ethernet pins to stm32mp157c
ARM: dts: stm32: Add syscfg on stm32mp1
ARM: dts: stm32: Add ethernet dwmac on stm32mp1
net: stmmac: add dwmac-4.20a compatible
ARM: dts: stm32: add support of ethernet on stm32mp157c-ev1
dt-bindings: stm32: add compatible for syscon
Documentation/devicetree/bindings/arm/stm32.txt | 4 +
.../devicetree/bindings/net/stm32-dwmac.txt | 18 +-
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 46 ++++
arch/arm/boot/dts/stm32mp157c-ev1.dts | 20 ++
arch/arm/boot/dts/stm32mp157c.dtsi | 35 +++
drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 270 +++++++++++++++++++--
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 3 +-
7 files changed, 378 insertions(+), 18 deletions(-)
--
1.9.1
Powered by blists - more mailing lists