[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20180513191425.9801-5-wens@csie.org>
Date: Mon, 14 May 2018 03:14:21 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc: Chen-Yu Tsai <wens@...e.org>, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org, netdev@...r.kernel.org,
Corentin Labbe <clabbe.montjoie@...il.com>,
Icenowy Zheng <icenowy@...c.io>,
Maxime Ripard <maxime.ripard@...tlin.com>,
Rob Herring <robh+dt@...nel.org>
Subject: [PATCH RESEND net-next v2 4/8] dt-bindings: net: dwmac-sun8i: Add binding for GMAC on Allwinner R40 SoC
The Allwinner R40 SoC has the EMAC controller supported by dwmac-sun8i.
It is named "GMAC", while EMAC refers to the 10/100 Mbps Ethernet
controller supported by sun4i-emac. The controller is the same, but
the R40 has the glue layer controls in the clock control unit (CCU),
with a reduced RX delay chain, and no TX delay chain.
This patch adds the R40 specific bits to the dwmac-sun8i binding.
Signed-off-by: Chen-Yu Tsai <wens@...e.org>
Reviewed-by: Rob Herring <robh@...nel.org>
Acked-by: Maxime Ripard <maxime.ripard@...tlin.com>
---
Documentation/devicetree/bindings/net/dwmac-sun8i.txt | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
index 1c0906a5c02b..cfe724398a12 100644
--- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
+++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
@@ -7,6 +7,7 @@ Required properties:
- compatible: must be one of the following string:
"allwinner,sun8i-a83t-emac"
"allwinner,sun8i-h3-emac"
+ "allwinner,sun8i-r40-gmac"
"allwinner,sun8i-v3s-emac"
"allwinner,sun50i-a64-emac"
- reg: address and length of the register for the device.
@@ -25,8 +26,10 @@ Required properties:
Optional properties:
- allwinner,tx-delay-ps: TX clock delay chain value in ps.
Range is 0-700. Default is 0.
+ Unavailable for allwinner,sun8i-r40-gmac
- allwinner,rx-delay-ps: RX clock delay chain value in ps.
Range is 0-3100. Default is 0.
+ Range is 0-700 for allwinner,sun8i-r40-gmac
Both delay properties need to be a multiple of 100. They control the
clock delay for external RGMII PHY. They do not apply to the internal
PHY or external non-RGMII PHYs.
--
2.17.0
Powered by blists - more mailing lists