netdev - [PATCH net-next v3 1/7] dt-bindings: net: add DT bindings for Microsemi MIIM

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180514200500.2953-2-alexandre.belloni@bootlin.com>
Date:   Mon, 14 May 2018 22:04:54 +0200
From:   Alexandre Belloni <alexandre.belloni@...tlin.com>
To:     "David S . Miller" <davem@...emloft.net>
Cc:     Allan Nielsen <Allan.Nielsen@...rosemi.com>,
        razvan.stefanescu@....com, po.liu@....com,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-mips@...ux-mips.org,
        Alexandre Belloni <alexandre.belloni@...tlin.com>
Subject: [PATCH net-next v3 1/7] dt-bindings: net: add DT bindings for Microsemi MIIM

DT bindings for the Microsemi MII Management Controller found on Microsemi
SoCs

Reviewed-by: Florian Fainelli <f.fainelli@...il.com>
Reviewed-by: Rob Herring <robh@...nel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
---
 .../devicetree/bindings/net/mscc-miim.txt     | 26 +++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/mscc-miim.txt

diff --git a/Documentation/devicetree/bindings/net/mscc-miim.txt b/Documentation/devicetree/bindings/net/mscc-miim.txt
new file mode 100644
index 000000000000..7104679cf59d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mscc-miim.txt
@@ -0,0 +1,26 @@
+Microsemi MII Management Controller (MIIM) / MDIO
+=================================================
+
+Properties:
+- compatible: must be "mscc,ocelot-miim"
+- reg: The base address of the MDIO bus controller register bank. Optionally, a
+  second register bank can be defined if there is an associated reset register
+  for internal PHYs
+- #address-cells: Must be <1>.
+- #size-cells: Must be <0>.  MDIO addresses have no size component.
+- interrupts: interrupt specifier (refer to the interrupt binding)
+
+Typically an MDIO bus might have several children.
+
+Example:
+	mdio@...009c {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "mscc,ocelot-miim";
+		reg = <0x107009c 0x36>, <0x10700f0 0x8>;
+		interrupts = <14>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
-- 
2.17.0