| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180515025112.16647-7-dsahern@gmail.com>
Date: Mon, 14 May 2018 19:51:11 -0700
From: David Ahern <dsahern@...il.com>
To: netdev@...r.kernel.org
Cc: Thomas.Winter@...iedtelesis.co.nz, idosch@...lanox.com,
sharpd@...ulusnetworks.com, roopa@...ulusnetworks.com,
David Ahern <dsahern@...il.com>
Subject: [PATCH RFC net-next 6/7] selftests: fib_tests: Add ipv6 route add append replace tests
Add IPv6 route tests covering add, append and replace permutations.
Assumes the ability to add a basic single path route works; this is
required for example when adding an address to an interface.
$ fib_tests.sh -t ipv6_rt
IPv6 route add / append tests
TEST: Attempt to add duplicate route - gw [ OK ]
TEST: Attempt to add duplicate route - dev only [ OK ]
TEST: Attempt to add duplicate route - reject route [ OK ]
TEST: Add new nexthop for existing prefix [ OK ]
TEST: Append leg to existing route - gw [ OK ]
TEST: Append leg to existing route - dev only [ OK ]
TEST: Append leg to existing route - reject route [ OK ]
TEST: Append leg to existing reject route - gw [ OK ]
TEST: Append leg to existing reject route - dev only [ OK ]
TEST: add multipath route [ OK ]
TEST: Attempt to add duplicate multipath route [ OK ]
TEST: route add with different metrics [ OK ]
TEST: route delete with metric [ OK ]
IPv6 route replace tests
TEST: single path with single path [ OK ]
TEST: single path with multipath [ OK ]
TEST: single path with reject route [ OK ]
TEST: single path with single path via multipath attribute [ OK ]
TEST: invalid nexthop [ OK ]
TEST: single path - replace of non-existent route [ OK ]
TEST: multipath with multipath [ OK ]
TEST: multipath with single path [ OK ]
TEST: multipath with single path via multipath attribute [ OK ]
TEST: multipath with reject route [ OK ]
TEST: multipath - invalid first nexthop [ OK ]
TEST: multipath - invalid second nexthop [ OK ]
TEST: multipath - replace of non-existent route [ OK ]
Signed-off-by: David Ahern <dsahern@...il.com>
---
tools/testing/selftests/net/fib_tests.sh | 331 ++++++++++++++++++++++++++++++-
1 file changed, 330 insertions(+), 1 deletion(-)
diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh
index 12b648826151..20cb1d2c4e72 100755
--- a/tools/testing/selftests/net/fib_tests.sh
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -6,7 +6,7 @@
ret=0
-TESTS="unregister down carrier nexthop"
+TESTS="unregister down carrier nexthop ipv6_rt"
VERBOSE=0
PAUSE_ON_FAIL=no
PAUSE=no
@@ -574,6 +574,334 @@ fib_nexthop_test()
}
################################################################################
+# Tests on route add and replace
+
+run_cmd()
+{
+ local cmd="$1"
+ local out
+ local stderr="2>/dev/null"
+
+ if [ "$VERBOSE" = "1" ]; then
+ printf " COMMAND: $cmd\n"
+ stderr=
+ fi
+
+ out=$(eval $cmd $stderr)
+ rc=$?
+ if [ "$VERBOSE" = "1" -a -n "$out" ]; then
+ echo " $out"
+ fi
+
+ [ "$VERBOSE" = "1" ] && echo
+
+ return $rc
+}
+
+# add route for a prefix, flushing any existing routes first
+# expected to be the first step of a test
+add_route6()
+{
+ local pfx="$1"
+ local nh="$2"
+ local out
+
+ if [ "$VERBOSE" = "1" ]; then
+ echo
+ echo " ##################################################"
+ echo
+ fi
+
+ run_cmd "$IP -6 ro flush ${pfx}"
+ [ $? -ne 0 ] && exit 1
+
+ out=$($IP -6 ro ls match ${pfx})
+ if [ -n "$out" ]; then
+ echo "Failed to flush routes for prefix used for tests."
+ exit 1
+ fi
+
+ run_cmd "$IP -6 ro add ${pfx} ${nh}"
+ if [ $? -ne 0 ]; then
+ echo "Failed to add initial route for test."
+ exit 1
+ fi
+}
+
+# add initial route - used in replace route tests
+add_initial_route6()
+{
+ add_route6 "2001:db8:104::/64" "$1"
+}
+
+check_route6()
+{
+ local pfx="2001:db8:104::/64"
+ local expected="$1"
+ local out
+ local rc=0
+
+ out=$($IP -6 ro ls match ${pfx} | sed -e 's/ pref medium//')
+ if [ -z "${out}" ]; then
+ if [ "$VERBOSE" = "1" ]; then
+ printf "\nNo route entry found\n"
+ printf "Expected:\n"
+ printf " ${expected}\n"
+ fi
+ return 1
+ fi
+
+ # tricky way to convert output to 1-line without ip's
+ # messy '\'; this drops all extra white space
+ out=$(echo ${out})
+ if [ "${out}" != "${expected}" ]; then
+ rc=1
+ if [ "${VERBOSE}" = "1" ]; then
+ printf " Unexpected route entry. Have:\n"
+ printf " ${out}\n"
+ printf " Expected:\n"
+ printf " ${expected}\n\n"
+ fi
+ fi
+
+ return $rc
+}
+
+route_cleanup()
+{
+ $IP li del red 2>/dev/null
+ $IP li del dummy1 2>/dev/null
+ $IP li del veth1 2>/dev/null
+ $IP li del veth3 2>/dev/null
+
+ cleanup &> /dev/null
+}
+
+route_setup()
+{
+ route_cleanup
+ setup
+
+ [ "${VERBOSE}" = "1" ] && set -x
+ set -e
+
+ $IP li add red up type vrf table 101
+ $IP li add veth1 type veth peer name veth2
+ $IP li add veth3 type veth peer name veth4
+
+ $IP li set veth1 up
+ $IP li set veth3 up
+ $IP li set veth2 vrf red up
+ $IP li set veth4 vrf red up
+ $IP li add dummy1 type dummy
+ $IP li set dummy1 vrf red up
+
+ $IP -6 addr add 2001:db8:101::1/64 dev veth1
+ $IP -6 addr add 2001:db8:101::2/64 dev veth2
+ $IP -6 addr add 2001:db8:103::1/64 dev veth3
+ $IP -6 addr add 2001:db8:103::2/64 dev veth4
+ $IP -6 addr add 2001:db8:104::1/64 dev dummy1
+
+ set +ex
+}
+
+# assumption is that basic add of a single path route works
+# otherwise just adding an address on an interface is broken
+ipv6_rt_add()
+{
+ local rc
+
+ echo
+ echo "IPv6 route add / append tests"
+
+ # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
+ add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+ run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::2"
+ log_test $? 2 "Attempt to add duplicate route - gw"
+
+ # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
+ add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+ run_cmd "$IP -6 ro add 2001:db8:104::/64 dev veth3"
+ log_test $? 2 "Attempt to add duplicate route - dev only"
+
+ # route add same prefix - fails with EEXISTS b/c ip adds NLM_F_EXCL
+ add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+ run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64"
+ log_test $? 2 "Attempt to add duplicate route - reject route"
+
+ # iproute2 prepend only sets NLM_F_CREATE
+ # - adds a new route; does NOT convert existing route to ECMP
+ add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+ run_cmd "$IP -6 ro prepend 2001:db8:104::/64 via 2001:db8:103::2"
+ check_route6 "2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024 2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024"
+ log_test $? 0 "Add new nexthop for existing prefix"
+
+ # route append with same prefix adds a new route
+ # - iproute2 sets NLM_F_CREATE | NLM_F_APPEND
+ add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+ run_cmd "$IP -6 ro append 2001:db8:104::/64 via 2001:db8:103::2"
+ check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+ log_test $? 0 "Append leg to existing route - gw"
+
+ add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+ run_cmd "$IP -6 ro append 2001:db8:104::/64 dev veth3"
+ check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop dev veth3 weight 1"
+ log_test $? 0 "Append leg to existing route - dev only"
+
+ add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+ run_cmd "$IP -6 ro append unreachable 2001:db8:104::/64"
+ log_test $? 2 "Append leg to existing route - reject route"
+
+ run_cmd "$IP -6 ro flush 2001:db8:104::/64"
+ run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64"
+ run_cmd "$IP -6 ro append 2001:db8:104::/64 via 2001:db8:103::2"
+ log_test $? 2 "Append leg to existing reject route - gw"
+
+ run_cmd "$IP -6 ro flush 2001:db8:104::/64"
+ run_cmd "$IP -6 ro add unreachable 2001:db8:104::/64"
+ run_cmd "$IP -6 ro append 2001:db8:104::/64 dev veth3"
+ log_test $? 2 "Append leg to existing reject route - dev only"
+
+ # insert mpath directly
+ add_route6 "2001:db8:104::/64" "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+ check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+ log_test $? 0 "add multipath route"
+
+ add_route6 "2001:db8:104::/64" "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+ run_cmd "$IP -6 ro add 2001:db8:104::/64 nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+ log_test $? 2 "Attempt to add duplicate multipath route"
+
+ # insert of a second route without append but different metric
+ add_route6 "2001:db8:104::/64" "via 2001:db8:101::2"
+ run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::2 metric 512"
+ rc=$?
+ if [ $rc -eq 0 ]; then
+ run_cmd "$IP -6 ro add 2001:db8:104::/64 via 2001:db8:103::3 metric 256"
+ rc=$?
+ fi
+ log_test $rc 0 "route add with different metrics"
+
+ run_cmd "$IP -6 ro del 2001:db8:104::/64 metric 512"
+ rc=$?
+ if [ $rc -eq 0 ]; then
+ check_route6 "2001:db8:104::/64 via 2001:db8:103::3 dev veth3 metric 256 2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024"
+ rc=$?
+ fi
+ log_test $rc 0 "route delete with metric"
+}
+
+ipv6_rt_replace_single()
+{
+ # single path with single path
+ #
+ add_initial_route6 "via 2001:db8:101::2"
+ run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:103::2"
+ check_route6 "2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024"
+ log_test $? 0 "single path with single path"
+
+ # single path with multipath
+ #
+ add_initial_route6 "nexthop via 2001:db8:101::2"
+ run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::2"
+ check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::3 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+ log_test $? 0 "single path with multipath"
+
+ # single path with reject
+ #
+ add_initial_route6 "nexthop via 2001:db8:101::2"
+ run_cmd "$IP -6 ro replace unreachable 2001:db8:104::/64"
+ check_route6 "unreachable 2001:db8:104::/64 dev lo metric 1024"
+ log_test $? 0 "single path with reject route"
+
+ # single path with single path using MULTIPATH attribute
+ #
+ add_initial_route6 "via 2001:db8:101::2"
+ run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:103::2"
+ check_route6 "2001:db8:104::/64 via 2001:db8:103::2 dev veth3 metric 1024"
+ log_test $? 0 "single path with single path via multipath attribute"
+
+ # route replace fails - invalid nexthop
+ add_initial_route6 "via 2001:db8:101::2"
+ run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:104::2"
+ if [ $? -eq 0 ]; then
+ log_test 0 1 "invalid nexthop"
+ else
+ check_route6 "2001:db8:104::/64 via 2001:db8:101::2 dev veth1 metric 1024"
+ log_test $? 0 "invalid nexthop"
+ fi
+
+ # replace non-existent route
+ # - note use of change versus replace since ip adds NLM_F_CREATE
+ # for replace
+ add_initial_route6 "via 2001:db8:101::2"
+ run_cmd "$IP -6 ro change 2001:db8:105::/64 via 2001:db8:101::2"
+ log_test $? 2 "single path - replace of non-existent route"
+}
+
+ipv6_rt_replace_mpath()
+{
+ # multipath with multipath
+ add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+ run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::3"
+ check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::3 dev veth1 weight 1 nexthop via 2001:db8:103::3 dev veth3 weight 1"
+ log_test $? 0 "multipath with multipath"
+
+ # multipath with single
+ add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+ run_cmd "$IP -6 ro replace 2001:db8:104::/64 via 2001:db8:101::3"
+ check_route6 "2001:db8:104::/64 via 2001:db8:101::3 dev veth1 metric 1024"
+ log_test $? 0 "multipath with single path"
+
+ # multipath with single
+ add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+ run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3"
+ check_route6 "2001:db8:104::/64 via 2001:db8:101::3 dev veth1 metric 1024"
+ log_test $? 0 "multipath with single path via multipath attribute"
+
+ # multipath with reject
+ add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+ run_cmd "$IP -6 ro replace unreachable 2001:db8:104::/64"
+ check_route6 "unreachable 2001:db8:104::/64 dev lo metric 1024"
+ log_test $? 0 "multipath with reject route"
+
+ # route replace fails - invalid nexthop 1
+ add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+ run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:111::3 nexthop via 2001:db8:103::3"
+ check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+ log_test $? 0 "multipath - invalid first nexthop"
+
+ # route replace fails - invalid nexthop 2
+ add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+ run_cmd "$IP -6 ro replace 2001:db8:104::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:113::3"
+ check_route6 "2001:db8:104::/64 metric 1024 nexthop via 2001:db8:101::2 dev veth1 weight 1 nexthop via 2001:db8:103::2 dev veth3 weight 1"
+ log_test $? 0 "multipath - invalid second nexthop"
+
+ # multipath non-existent route
+ add_initial_route6 "nexthop via 2001:db8:101::2 nexthop via 2001:db8:103::2"
+ run_cmd "$IP -6 ro change 2001:db8:105::/64 nexthop via 2001:db8:101::3 nexthop via 2001:db8:103::3"
+ log_test $? 2 "multipath - replace of non-existent route"
+}
+
+ipv6_rt_replace()
+{
+ echo
+ echo "IPv6 route replace tests"
+
+ ipv6_rt_replace_single
+ ipv6_rt_replace_mpath
+}
+
+ipv6_route_test()
+{
+ route_setup
+
+ ipv6_rt_add
+ ipv6_rt_replace
+
+ route_cleanup
+}
+
+################################################################################
# usage
usage()
@@ -635,6 +963,7 @@ do
fib_down_test|down) fib_down_test;;
fib_carrier_test|carrier) fib_carrier_test;;
fib_nexthop_test|nexthop) fib_nexthop_test;;
+ ipv6_route_test|ipv6_rt) ipv6_route_test;;
help) echo "Test names: $TESTS"; exit 0;;
esac
--
2.11.0
Powered by blists - more mailing lists