| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180521215902.8135.25029.stgit@tlendack-t1.amdoffice.net>
Date: Mon, 21 May 2018 16:59:02 -0500
From: Tom Lendacky <thomas.lendacky@....com>
To: netdev@...r.kernel.org
Cc: David Miller <davem@...emloft.net>
Subject: [PATCH net-next 05/12] amd-xgbe: Add ethtool support to retrieve
SFP module info
Add support to get SFP module information using ethtool.
Signed-off-by: Tom Lendacky <thomas.lendacky@....com>
---
drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 18 +++
drivers/net/ethernet/amd/xgbe/xgbe-mdio.c | 21 ++++
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 137 ++++++++++++++++++++++++++
drivers/net/ethernet/amd/xgbe/xgbe.h | 13 ++
4 files changed, 189 insertions(+)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
index ff397bb..57394b77 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
@@ -626,6 +626,22 @@ static int xgbe_get_ts_info(struct net_device *netdev,
return 0;
}
+static int xgbe_get_module_info(struct net_device *netdev,
+ struct ethtool_modinfo *modinfo)
+{
+ struct xgbe_prv_data *pdata = netdev_priv(netdev);
+
+ return pdata->phy_if.module_info(pdata, modinfo);
+}
+
+static int xgbe_get_module_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct xgbe_prv_data *pdata = netdev_priv(netdev);
+
+ return pdata->phy_if.module_eeprom(pdata, eeprom, data);
+}
+
static const struct ethtool_ops xgbe_ethtool_ops = {
.get_drvinfo = xgbe_get_drvinfo,
.get_msglevel = xgbe_get_msglevel,
@@ -646,6 +662,8 @@ static int xgbe_get_ts_info(struct net_device *netdev,
.get_ts_info = xgbe_get_ts_info,
.get_link_ksettings = xgbe_get_link_ksettings,
.set_link_ksettings = xgbe_set_link_ksettings,
+ .get_module_info = xgbe_get_module_info,
+ .get_module_eeprom = xgbe_get_module_eeprom,
};
const struct ethtool_ops *xgbe_get_ethtool_ops(void)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
index 1b45cd7..9c39c72 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
@@ -126,6 +126,24 @@
#include "xgbe.h"
#include "xgbe-common.h"
+static int xgbe_phy_module_eeprom(struct xgbe_prv_data *pdata,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ if (!pdata->phy_if.phy_impl.module_eeprom)
+ return -ENXIO;
+
+ return pdata->phy_if.phy_impl.module_eeprom(pdata, eeprom, data);
+}
+
+static int xgbe_phy_module_info(struct xgbe_prv_data *pdata,
+ struct ethtool_modinfo *modinfo)
+{
+ if (!pdata->phy_if.phy_impl.module_info)
+ return -ENXIO;
+
+ return pdata->phy_if.phy_impl.module_info(pdata, modinfo);
+}
+
static void xgbe_an37_clear_interrupts(struct xgbe_prv_data *pdata)
{
int reg;
@@ -1639,4 +1657,7 @@ void xgbe_init_function_ptrs_phy(struct xgbe_phy_if *phy_if)
phy_if->phy_valid_speed = xgbe_phy_valid_speed;
phy_if->an_isr = xgbe_an_combined_isr;
+
+ phy_if->module_info = xgbe_phy_module_info;
+ phy_if->module_eeprom = xgbe_phy_module_eeprom;
}
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index cb15caf..141bb13 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -119,6 +119,7 @@
#include <linux/kmod.h>
#include <linux/mdio.h>
#include <linux/phy.h>
+#include <linux/ethtool.h>
#include "xgbe.h"
#include "xgbe-common.h"
@@ -270,6 +271,15 @@ struct xgbe_sfp_eeprom {
u8 vendor[32];
};
+#define XGBE_SFP_DIAGS_SUPPORTED(_x) \
+ ((_x)->extd[XGBE_SFP_EXTD_SFF_8472] && \
+ !((_x)->extd[XGBE_SFP_EXTD_DIAG] & XGBE_SFP_EXTD_DIAG_ADDR_CHANGE))
+
+#define XGBE_SFP_EEPROM_BASE_LEN 256
+#define XGBE_SFP_EEPROM_DIAG_LEN 256
+#define XGBE_SFP_EEPROM_MAX (XGBE_SFP_EEPROM_BASE_LEN + \
+ XGBE_SFP_EEPROM_DIAG_LEN)
+
#define XGBE_BEL_FUSE_VENDOR "BEL-FUSE "
#define XGBE_BEL_FUSE_PARTNO "1GBT-SFP06 "
@@ -1301,6 +1311,130 @@ static void xgbe_phy_sfp_detect(struct xgbe_prv_data *pdata)
xgbe_phy_put_comm_ownership(pdata);
}
+static int xgbe_phy_module_eeprom(struct xgbe_prv_data *pdata,
+ struct ethtool_eeprom *eeprom, u8 *data)
+{
+ struct xgbe_phy_data *phy_data = pdata->phy_data;
+ u8 eeprom_addr, eeprom_data[XGBE_SFP_EEPROM_MAX];
+ struct xgbe_sfp_eeprom *sfp_eeprom;
+ unsigned int i, j, rem;
+ int ret;
+
+ rem = eeprom->len;
+
+ if (!eeprom->len) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ if ((eeprom->offset + eeprom->len) > XGBE_SFP_EEPROM_MAX) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ if (phy_data->port_mode != XGBE_PORT_MODE_SFP) {
+ ret = -ENXIO;
+ goto done;
+ }
+
+ if (!netif_running(pdata->netdev)) {
+ ret = -EIO;
+ goto done;
+ }
+
+ if (phy_data->sfp_mod_absent) {
+ ret = -EIO;
+ goto done;
+ }
+
+ ret = xgbe_phy_get_comm_ownership(pdata);
+ if (ret) {
+ ret = -EIO;
+ goto done;
+ }
+
+ ret = xgbe_phy_sfp_get_mux(pdata);
+ if (ret) {
+ netdev_err(pdata->netdev, "I2C error setting SFP MUX\n");
+ ret = -EIO;
+ goto put_own;
+ }
+
+ /* Read the SFP serial ID eeprom */
+ eeprom_addr = 0;
+ ret = xgbe_phy_i2c_read(pdata, XGBE_SFP_SERIAL_ID_ADDRESS,
+ &eeprom_addr, sizeof(eeprom_addr),
+ eeprom_data, XGBE_SFP_EEPROM_BASE_LEN);
+ if (ret) {
+ netdev_err(pdata->netdev,
+ "I2C error reading SFP EEPROM\n");
+ ret = -EIO;
+ goto put_mux;
+ }
+
+ sfp_eeprom = (struct xgbe_sfp_eeprom *)eeprom_data;
+
+ if (XGBE_SFP_DIAGS_SUPPORTED(sfp_eeprom)) {
+ /* Read the SFP diagnostic eeprom */
+ eeprom_addr = 0;
+ ret = xgbe_phy_i2c_read(pdata, XGBE_SFP_DIAG_INFO_ADDRESS,
+ &eeprom_addr, sizeof(eeprom_addr),
+ eeprom_data + XGBE_SFP_EEPROM_BASE_LEN,
+ XGBE_SFP_EEPROM_DIAG_LEN);
+ if (ret) {
+ netdev_err(pdata->netdev,
+ "I2C error reading SFP DIAGS\n");
+ ret = -EIO;
+ goto put_mux;
+ }
+ }
+
+ for (i = 0, j = eeprom->offset; i < eeprom->len; i++, j++) {
+ if ((j >= XGBE_SFP_EEPROM_BASE_LEN) &&
+ !XGBE_SFP_DIAGS_SUPPORTED(sfp_eeprom))
+ break;
+
+ data[i] = eeprom_data[j];
+ rem--;
+ }
+
+put_mux:
+ xgbe_phy_sfp_put_mux(pdata);
+
+put_own:
+ xgbe_phy_put_comm_ownership(pdata);
+
+done:
+ eeprom->len -= rem;
+
+ return ret;
+}
+
+static int xgbe_phy_module_info(struct xgbe_prv_data *pdata,
+ struct ethtool_modinfo *modinfo)
+{
+ struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+ if (phy_data->port_mode != XGBE_PORT_MODE_SFP)
+ return -ENXIO;
+
+ if (!netif_running(pdata->netdev))
+ return -EIO;
+
+ if (phy_data->sfp_mod_absent)
+ return -EIO;
+
+ if (XGBE_SFP_DIAGS_SUPPORTED(&phy_data->sfp_eeprom)) {
+ modinfo->type = ETH_MODULE_SFF_8472;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+ } else {
+ modinfo->type = ETH_MODULE_SFF_8079;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
+ }
+
+ return 0;
+}
+
static void xgbe_phy_phydev_flowctrl(struct xgbe_prv_data *pdata)
{
struct ethtool_link_ksettings *lks = &pdata->phy.lks;
@@ -3196,4 +3330,7 @@ void xgbe_init_function_ptrs_phy_v2(struct xgbe_phy_if *phy_if)
phy_impl->kr_training_pre = xgbe_phy_kr_training_pre;
phy_impl->kr_training_post = xgbe_phy_kr_training_post;
+
+ phy_impl->module_info = xgbe_phy_module_info;
+ phy_impl->module_eeprom = xgbe_phy_module_eeprom;
}
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h
index 54e43ad3..f0f455b 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe.h
@@ -835,6 +835,7 @@ struct xgbe_hw_if {
* Optional routines:
* an_pre, an_post
* kr_training_pre, kr_training_post
+ * module_info, module_eeprom
*/
struct xgbe_phy_impl_if {
/* Perform Setup/teardown actions */
@@ -883,6 +884,12 @@ struct xgbe_phy_impl_if {
/* Pre/Post KR training enablement support */
void (*kr_training_pre)(struct xgbe_prv_data *);
void (*kr_training_post)(struct xgbe_prv_data *);
+
+ /* SFP module related info */
+ int (*module_info)(struct xgbe_prv_data *pdata,
+ struct ethtool_modinfo *modinfo);
+ int (*module_eeprom)(struct xgbe_prv_data *pdata,
+ struct ethtool_eeprom *eeprom, u8 *data);
};
struct xgbe_phy_if {
@@ -905,6 +912,12 @@ struct xgbe_phy_if {
/* For single interrupt support */
irqreturn_t (*an_isr)(struct xgbe_prv_data *);
+ /* For ethtool PHY support */
+ int (*module_info)(struct xgbe_prv_data *pdata,
+ struct ethtool_modinfo *modinfo);
+ int (*module_eeprom)(struct xgbe_prv_data *pdata,
+ struct ethtool_eeprom *eeprom, u8 *data);
+
/* PHY implementation specific services */
struct xgbe_phy_impl_if phy_impl;
};
Powered by blists - more mailing lists