[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180522072846.2454-7-sudarsana.kalluru@cavium.com>
Date: Tue, 22 May 2018 00:28:42 -0700
From: Sudarsana Reddy Kalluru <sudarsana.kalluru@...ium.com>
To: <davem@...emloft.net>
CC: <netdev@...r.kernel.org>, <Ariel.Elior@...ium.com>,
<chad.dupuis@...ium.com>, <manish.rangankar@...ium.com>
Subject: [PATCH net-next v2 06/10] qede: Add support for populating ethernet TLVs.
This patch adds callbacks for providing the ethernet protocol driver TLVs.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@...ium.com>
Signed-off-by: Ariel Elior <ariel.elior@...ium.com>
---
drivers/net/ethernet/qlogic/qede/qede_main.c | 101 +++++++++++++++++++++++++++
1 file changed, 101 insertions(+)
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 7abaf27..9e70f71 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -133,6 +133,9 @@ enum qede_pci_private {
static void qede_remove(struct pci_dev *pdev);
static void qede_shutdown(struct pci_dev *pdev);
static void qede_link_update(void *dev, struct qed_link_output *link);
+static void qede_get_eth_tlv_data(void *edev, void *data);
+static void qede_get_generic_tlv_data(void *edev,
+ struct qed_generic_tlvs *data);
/* The qede lock is used to protect driver state change and driver flows that
* are not reentrant.
@@ -228,6 +231,8 @@ static int qede_sriov_configure(struct pci_dev *pdev, int num_vfs_param)
.arfs_filter_op = qede_arfs_filter_op,
#endif
.link_update = qede_link_update,
+ .get_generic_tlv_data = qede_get_generic_tlv_data,
+ .get_protocol_tlv_data = qede_get_eth_tlv_data,
},
.force_mac = qede_force_mac,
.ports_update = qede_udp_ports_update,
@@ -2131,3 +2136,99 @@ static void qede_link_update(void *dev, struct qed_link_output *link)
}
}
}
+
+static bool qede_is_txq_full(struct qede_dev *edev, struct qede_tx_queue *txq)
+{
+ struct netdev_queue *netdev_txq;
+
+ netdev_txq = netdev_get_tx_queue(edev->ndev, txq->index);
+ if (netif_xmit_stopped(netdev_txq))
+ return true;
+
+ return false;
+}
+
+static void qede_get_generic_tlv_data(void *dev, struct qed_generic_tlvs *data)
+{
+ struct qede_dev *edev = dev;
+ struct netdev_hw_addr *ha;
+ int i;
+
+ if (edev->ndev->features & NETIF_F_IP_CSUM)
+ data->feat_flags |= QED_TLV_IP_CSUM;
+ if (edev->ndev->features & NETIF_F_TSO)
+ data->feat_flags |= QED_TLV_LSO;
+
+ ether_addr_copy(data->mac[0], edev->ndev->dev_addr);
+ memset(data->mac[1], 0, ETH_ALEN);
+ memset(data->mac[2], 0, ETH_ALEN);
+ /* Copy the first two UC macs */
+ netif_addr_lock_bh(edev->ndev);
+ i = 1;
+ netdev_for_each_uc_addr(ha, edev->ndev) {
+ ether_addr_copy(data->mac[i++], ha->addr);
+ if (i == QED_TLV_MAC_COUNT)
+ break;
+ }
+
+ netif_addr_unlock_bh(edev->ndev);
+}
+
+static void qede_get_eth_tlv_data(void *dev, void *data)
+{
+ struct qed_mfw_tlv_eth *etlv = data;
+ struct qede_dev *edev = dev;
+ struct qede_fastpath *fp;
+ int i;
+
+ etlv->lso_maxoff_size = 0XFFFF;
+ etlv->lso_maxoff_size_set = true;
+ etlv->lso_minseg_size = (u16)ETH_TX_LSO_WINDOW_MIN_LEN;
+ etlv->lso_minseg_size_set = true;
+ etlv->prom_mode = !!(edev->ndev->flags & IFF_PROMISC);
+ etlv->prom_mode_set = true;
+ etlv->tx_descr_size = QEDE_TSS_COUNT(edev);
+ etlv->tx_descr_size_set = true;
+ etlv->rx_descr_size = QEDE_RSS_COUNT(edev);
+ etlv->rx_descr_size_set = true;
+ etlv->iov_offload = QED_MFW_TLV_IOV_OFFLOAD_VEB;
+ etlv->iov_offload_set = true;
+
+ /* Fill information regarding queues; Should be done under the qede
+ * lock to guarantee those don't change beneath our feet.
+ */
+ etlv->txqs_empty = true;
+ etlv->rxqs_empty = true;
+ etlv->num_txqs_full = 0;
+ etlv->num_rxqs_full = 0;
+
+ __qede_lock(edev);
+ for_each_queue(i) {
+ fp = &edev->fp_array[i];
+ if (fp->type & QEDE_FASTPATH_TX) {
+ if (fp->txq->sw_tx_cons != fp->txq->sw_tx_prod)
+ etlv->txqs_empty = false;
+ if (qede_is_txq_full(edev, fp->txq))
+ etlv->num_txqs_full++;
+ }
+ if (fp->type & QEDE_FASTPATH_RX) {
+ if (qede_has_rx_work(fp->rxq))
+ etlv->rxqs_empty = false;
+
+ /* This one is a bit tricky; Firmware might stop
+ * placing packets if ring is not yet full.
+ * Give an approximation.
+ */
+ if (le16_to_cpu(*fp->rxq->hw_cons_ptr) -
+ qed_chain_get_cons_idx(&fp->rxq->rx_comp_ring) >
+ RX_RING_SIZE - 100)
+ etlv->num_rxqs_full++;
+ }
+ }
+ __qede_unlock(edev);
+
+ etlv->txqs_empty_set = true;
+ etlv->rxqs_empty_set = true;
+ etlv->num_txqs_full_set = true;
+ etlv->num_rxqs_full_set = true;
+}
--
1.8.3.1
Powered by blists - more mailing lists