| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20180523163913.31625.63415.stgit@tlendack-t1.amdoffice.net>
Date: Wed, 23 May 2018 11:39:13 -0500
From: Tom Lendacky <thomas.lendacky@....com>
To: netdev@...r.kernel.org
Cc: David Miller <davem@...emloft.net>
Subject: [PATCH net-next v2 08/12] amd-xgbe: Add ethtool show/set channels
support
Add ethtool support to show and set the device channel configuration.
Changing the channel configuration will result in a device restart.
Signed-off-by: Tom Lendacky <thomas.lendacky@....com>
---
drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 25 +++++
drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c | 134 ++++++++++++++++++++++++++
drivers/net/ethernet/amd/xgbe/xgbe.h | 4 +
3 files changed, 163 insertions(+)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
index 397e3a0..24f1053 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-drv.c
@@ -1329,6 +1329,17 @@ static int xgbe_alloc_memory(struct xgbe_prv_data *pdata)
struct net_device *netdev = pdata->netdev;
int ret;
+ if (pdata->new_tx_ring_count) {
+ pdata->tx_ring_count = pdata->new_tx_ring_count;
+ pdata->tx_q_count = pdata->tx_ring_count;
+ pdata->new_tx_ring_count = 0;
+ }
+
+ if (pdata->new_rx_ring_count) {
+ pdata->rx_ring_count = pdata->new_rx_ring_count;
+ pdata->new_rx_ring_count = 0;
+ }
+
/* Calculate the Rx buffer size before allocating rings */
pdata->rx_buf_size = xgbe_calc_rx_buf_size(netdev, netdev->mtu);
@@ -1482,6 +1493,20 @@ static void xgbe_stopdev(struct work_struct *work)
netdev_alert(pdata->netdev, "device stopped\n");
}
+void xgbe_full_restart_dev(struct xgbe_prv_data *pdata)
+{
+ /* If not running, "restart" will happen on open */
+ if (!netif_running(pdata->netdev))
+ return;
+
+ xgbe_stop(pdata);
+
+ xgbe_free_memory(pdata);
+ xgbe_alloc_memory(pdata);
+
+ xgbe_start(pdata);
+}
+
void xgbe_restart_dev(struct xgbe_prv_data *pdata)
{
/* If not running, "restart" will happen on open */
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
index d12f982..a880f10 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
@@ -705,6 +705,138 @@ static int xgbe_set_ringparam(struct net_device *netdev,
return 0;
}
+static void xgbe_get_channels(struct net_device *netdev,
+ struct ethtool_channels *channels)
+{
+ struct xgbe_prv_data *pdata = netdev_priv(netdev);
+ unsigned int rx, tx, combined;
+
+ /* Calculate maximums allowed:
+ * - Take into account the number of available IRQs
+ * - Do not take into account the number of online CPUs so that
+ * the user can over-subscribe if desired
+ * - Tx is additionally limited by the number of hardware queues
+ */
+ rx = min(pdata->hw_feat.rx_ch_cnt, pdata->rx_max_channel_count);
+ rx = min(rx, pdata->channel_irq_count);
+ tx = min(pdata->hw_feat.tx_ch_cnt, pdata->tx_max_channel_count);
+ tx = min(tx, pdata->channel_irq_count);
+ tx = min(tx, pdata->tx_max_q_count);
+
+ combined = min(rx, tx);
+
+ channels->max_combined = combined;
+ channels->max_rx = rx ? rx - 1 : 0;
+ channels->max_tx = tx ? tx - 1 : 0;
+
+ /* Get current settings based on device state */
+ rx = pdata->new_rx_ring_count ? : pdata->rx_ring_count;
+ tx = pdata->new_tx_ring_count ? : pdata->tx_ring_count;
+
+ combined = min(rx, tx);
+ rx -= combined;
+ tx -= combined;
+
+ channels->combined_count = combined;
+ channels->rx_count = rx;
+ channels->tx_count = tx;
+}
+
+static void xgbe_print_set_channels_input(struct net_device *netdev,
+ struct ethtool_channels *channels)
+{
+ netdev_err(netdev, "channel inputs: combined=%u, rx-only=%u, tx-only=%u\n",
+ channels->combined_count, channels->rx_count,
+ channels->tx_count);
+}
+
+static int xgbe_set_channels(struct net_device *netdev,
+ struct ethtool_channels *channels)
+{
+ struct xgbe_prv_data *pdata = netdev_priv(netdev);
+ unsigned int rx, rx_curr, tx, tx_curr, combined;
+
+ /* Calculate maximums allowed:
+ * - Take into account the number of available IRQs
+ * - Do not take into account the number of online CPUs so that
+ * the user can over-subscribe if desired
+ * - Tx is additionally limited by the number of hardware queues
+ */
+ rx = min(pdata->hw_feat.rx_ch_cnt, pdata->rx_max_channel_count);
+ rx = min(rx, pdata->channel_irq_count);
+ tx = min(pdata->hw_feat.tx_ch_cnt, pdata->tx_max_channel_count);
+ tx = min(tx, pdata->tx_max_q_count);
+ tx = min(tx, pdata->channel_irq_count);
+
+ combined = min(rx, tx);
+
+ /* Should not be setting other count */
+ if (channels->other_count) {
+ netdev_err(netdev,
+ "other channel count must be zero\n");
+ return -EINVAL;
+ }
+
+ /* Require at least one Combined (Rx and Tx) channel */
+ if (!channels->combined_count) {
+ netdev_err(netdev,
+ "at least one combined Rx/Tx channel is required\n");
+ xgbe_print_set_channels_input(netdev, channels);
+ return -EINVAL;
+ }
+
+ /* Check combined channels */
+ if (channels->combined_count > combined) {
+ netdev_err(netdev,
+ "combined channel count cannot exceed %u\n",
+ combined);
+ xgbe_print_set_channels_input(netdev, channels);
+ return -EINVAL;
+ }
+
+ /* Can have some Rx-only or Tx-only channels, but not both */
+ if (channels->rx_count && channels->tx_count) {
+ netdev_err(netdev,
+ "cannot specify both Rx-only and Tx-only channels\n");
+ xgbe_print_set_channels_input(netdev, channels);
+ return -EINVAL;
+ }
+
+ /* Check that we don't exceed the maximum number of channels */
+ if ((channels->combined_count + channels->rx_count) > rx) {
+ netdev_err(netdev,
+ "total Rx channels (%u) requested exceeds maximum available (%u)\n",
+ channels->combined_count + channels->rx_count, rx);
+ xgbe_print_set_channels_input(netdev, channels);
+ return -EINVAL;
+ }
+
+ if ((channels->combined_count + channels->tx_count) > tx) {
+ netdev_err(netdev,
+ "total Tx channels (%u) requested exceeds maximum available (%u)\n",
+ channels->combined_count + channels->tx_count, tx);
+ xgbe_print_set_channels_input(netdev, channels);
+ return -EINVAL;
+ }
+
+ rx = channels->combined_count + channels->rx_count;
+ tx = channels->combined_count + channels->tx_count;
+
+ rx_curr = pdata->new_rx_ring_count ? : pdata->rx_ring_count;
+ tx_curr = pdata->new_tx_ring_count ? : pdata->tx_ring_count;
+
+ if ((rx == rx_curr) && (tx == tx_curr))
+ goto out;
+
+ pdata->new_rx_ring_count = rx;
+ pdata->new_tx_ring_count = tx;
+
+ xgbe_full_restart_dev(pdata);
+
+out:
+ return 0;
+}
+
static const struct ethtool_ops xgbe_ethtool_ops = {
.get_drvinfo = xgbe_get_drvinfo,
.get_msglevel = xgbe_get_msglevel,
@@ -729,6 +861,8 @@ static int xgbe_set_ringparam(struct net_device *netdev,
.get_module_eeprom = xgbe_get_module_eeprom,
.get_ringparam = xgbe_get_ringparam,
.set_ringparam = xgbe_set_ringparam,
+ .get_channels = xgbe_get_channels,
+ .set_channels = xgbe_set_channels,
};
const struct ethtool_ops *xgbe_get_ethtool_ops(void)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h
index 7dc0fac..7a412cf 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe.h
@@ -1122,6 +1122,9 @@ struct xgbe_prv_data {
unsigned int rx_ring_count;
unsigned int rx_desc_count;
+ unsigned int new_tx_ring_count;
+ unsigned int new_rx_ring_count;
+
unsigned int tx_max_q_count;
unsigned int rx_max_q_count;
unsigned int tx_q_count;
@@ -1336,6 +1339,7 @@ void xgbe_dump_rx_desc(struct xgbe_prv_data *, struct xgbe_ring *,
void xgbe_init_rx_coalesce(struct xgbe_prv_data *);
void xgbe_init_tx_coalesce(struct xgbe_prv_data *);
void xgbe_restart_dev(struct xgbe_prv_data *pdata);
+void xgbe_full_restart_dev(struct xgbe_prv_data *pdata);
#ifdef CONFIG_DEBUG_FS
void xgbe_debugfs_init(struct xgbe_prv_data *);
Powered by blists - more mailing lists