netdev - Re: [PATCH net-next v2 0/2] net: phy: improve PHY suspend/resume

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <157635c5-6967-a207-1ee6-a2e02da2d2fe@gmail.com>
Date:   Thu, 24 May 2018 07:52:54 +0200
From:   Heiner Kallweit <hkallweit1@...il.com>
To:     Andrew Lunn <andrew@...n.ch>
Cc:     Florian Fainelli <f.fainelli@...il.com>,
        David Miller <davem@...emloft.net>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [PATCH net-next v2 0/2] net: phy: improve PHY suspend/resume

Am 24.05.2018 um 00:04 schrieb Andrew Lunn:
> On Wed, May 23, 2018 at 10:15:29PM +0200, Heiner Kallweit wrote:
>> I have the issue that suspending the MAC-integrated PHY gives an
>> error during system suspend. The sequence is:
>>
>> 1. unconnected PHY/MAC are runtime-suspended already
>> 2. system suspend commences
>> 3. mdio_bus_phy_suspend is called
>> 4. suspend callback of the network driver is called (implicitly
>>    MAC/PHY are runtime-resumed before)
>> 5. suspend callback suspends MAC/PHY
>>
>> The problem occurs in step 3. phy_suspend() fails because the MDIO
>> bus isn't accessible due to the chip being runtime-suspended.
> 
> I think you are fixing the wrong problem. I've had the same with the
> FEC driver. I fixed it by making the MDIO operations runtime-suspend
> aware:
> 
Interesting, didn't see it from that angle yet. Sounds plausible.
Thanks a lot for the feedback and I'll have a look at the FEC driver.

Heiner

> commit 8fff755e9f8d0f70a595e79f248695ce6aef5cc3
> Author: Andrew Lunn <andrew@...n.ch>
> Date:   Sat Jul 25 22:38:02 2015 +0200
> 
>     net: fec: Ensure clocks are enabled while using mdio bus
>     
>     When a switch is attached to the mdio bus, the mdio bus can be used
>     while the interface is not open. If the IPG clock is not enabled, MDIO
>     reads/writes will simply time out.
>     
>     Add support for runtime PM to control this clock. Enable/disable this
>     clock using runtime PM, with open()/close() and mdio read()/write()
>     function triggering runtime PM operations. Since PM is optional, the
>     IPG clock is enabled at probe and is no longer modified by
>     fec_enet_clk_enable(), thus if PM is not enabled in the kernel, it is
>     guaranteed the clock is running when MDIO operations are performed.
> 
> Don't copy this patch 1:1. I introduced a few bugs which took a while
> to be shaken out :-(
> 
>    Andrew
>