| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180602000544.18717-13-saeedm@mellanox.com>
Date: Fri, 1 Jun 2018 17:05:39 -0700
From: Saeed Mahameed <saeedm@...lanox.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: netdev@...r.kernel.org, Tariq Toukan <tariqt@...lanox.com>,
Saeed Mahameed <saeedm@...lanox.com>
Subject: [net-next 12/17] net/mlx5e: RX, Remove HW LRO support in legacy RQ
From: Tariq Toukan <tariqt@...lanox.com>
Current LRO implementation in Legacy RQ uses high-order pages.
In downstream patches of this series we complete the transition
to using only order-0 pages in RX datapath (which was already done
in Striding RQ).
Unlike the more advanced Striding RQ, Legacy RQ does not make reuse
of any non-consumed buffers of non-full LRO sessions, and combining
it with order-0 pages has many performance drawbacks.
Hence, here we totally remove LRO support in Legacy RQ.
This guarantees having no out-of-order completions, which allows using
a cyclic work queue (instead of a linked-list) in a downstream patch.
Signed-off-by: Tariq Toukan <tariqt@...lanox.com>
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
.../ethernet/mellanox/mlx5/core/en_ethtool.c | 7 ++++
.../net/ethernet/mellanox/mlx5/core/en_main.c | 33 +++++++++++--------
2 files changed, 26 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 42bd256e680d..fffe514ba855 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -1515,6 +1515,9 @@ static int set_pflag_rx_striding_rq(struct net_device *netdev, bool enable)
return -EOPNOTSUPP;
if (!mlx5e_striding_rq_possible(mdev, &priv->channels.params))
return -EINVAL;
+ } else if (priv->channels.params.lro_en) {
+ netdev_warn(netdev, "Can't set legacy RQ with LRO, disable LRO first\n");
+ return -EINVAL;
}
new_channels.params = priv->channels.params;
@@ -1589,6 +1592,10 @@ static int mlx5e_set_priv_flags(struct net_device *netdev, u32 pflags)
out:
mutex_unlock(&priv->state_lock);
+
+ /* Need to fix some features.. */
+ netdev_update_features(netdev);
+
return err;
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index ab7b2a4e6edc..3f1f0552843c 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -182,14 +182,6 @@ void mlx5e_init_rq_type_params(struct mlx5_core_dev *mdev,
params->log_rq_mtu_frames = is_kdump_kernel() ?
MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE :
MLX5E_PARAMS_DEFAULT_LOG_RQ_SIZE;
- switch (params->rq_wq_type) {
- case MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ:
- break;
- default: /* MLX5_WQ_TYPE_LINKED_LIST */
- /* Extra room needed for build_skb */
- params->lro_wqe_sz -= mlx5e_get_rq_headroom(mdev, params) +
- SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
- }
mlx5_core_info(mdev, "MLX5E: StrdRq(%d) RqSz(%ld) StrdSz(%ld) RxCqeCmprss(%d)\n",
params->rq_wq_type == MLX5_WQ_TYPE_LINKED_LIST_STRIDING_RQ,
@@ -503,14 +495,12 @@ static int mlx5e_alloc_rq(struct mlx5e_channel *c,
goto err_rq_wq_destroy;
}
- byte_count = params->lro_en ?
- params->lro_wqe_sz :
- MLX5E_SW2HW_MTU(params, params->sw_mtu);
+ byte_count = MLX5E_SW2HW_MTU(params, params->sw_mtu);
#ifdef CONFIG_MLX5_EN_IPSEC
if (MLX5_IPSEC_DEV(mdev))
byte_count += MLX5E_METADATA_ETHER_LEN;
#endif
- rq->wqe.page_reuse = !params->xdp_prog && !params->lro_en;
+ rq->wqe.page_reuse = !params->xdp_prog;
/* calc the required page order */
rq->wqe.frag_sz = MLX5_SKB_FRAG_SZ(rq->buff.headroom + byte_count);
@@ -3311,6 +3301,12 @@ static int set_feature_lro(struct net_device *netdev, bool enable)
mutex_lock(&priv->state_lock);
old_params = &priv->channels.params;
+ if (enable && !MLX5E_GET_PFLAG(old_params, MLX5E_PFLAG_RX_STRIDING_RQ)) {
+ netdev_warn(netdev, "can't set LRO with legacy RQ\n");
+ err = -EINVAL;
+ goto out;
+ }
+
reset = test_bit(MLX5E_STATE_OPENED, &priv->state);
new_channels.params = *old_params;
@@ -3480,16 +3476,24 @@ static netdev_features_t mlx5e_fix_features(struct net_device *netdev,
netdev_features_t features)
{
struct mlx5e_priv *priv = netdev_priv(netdev);
+ struct mlx5e_params *params;
mutex_lock(&priv->state_lock);
+ params = &priv->channels.params;
if (!bitmap_empty(priv->fs.vlan.active_svlans, VLAN_N_VID)) {
/* HW strips the outer C-tag header, this is a problem
* for S-tag traffic.
*/
features &= ~NETIF_F_HW_VLAN_CTAG_RX;
- if (!priv->channels.params.vlan_strip_disable)
+ if (!params->vlan_strip_disable)
netdev_warn(netdev, "Dropping C-tag vlan stripping offload due to S-tag vlan\n");
}
+ if (!MLX5E_GET_PFLAG(params, MLX5E_PFLAG_RX_STRIDING_RQ)) {
+ features &= ~NETIF_F_LRO;
+ if (params->lro_en)
+ netdev_warn(netdev, "Disabling LRO, not supported in legacy RQ\n");
+ }
+
mutex_unlock(&priv->state_lock);
return features;
@@ -4328,7 +4332,8 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
netdev->hw_enc_features |= NETIF_F_HW_VLAN_CTAG_TX;
netdev->hw_enc_features |= NETIF_F_HW_VLAN_CTAG_RX;
- if (!!MLX5_CAP_ETH(mdev, lro_cap))
+ if (!!MLX5_CAP_ETH(mdev, lro_cap) &&
+ mlx5e_check_fragmented_striding_rq_cap(mdev))
netdev->vlan_features |= NETIF_F_LRO;
netdev->hw_features = netdev->vlan_features;
--
2.17.0
Powered by blists - more mailing lists