lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 19 Jun 2018 10:35:38 -0500
From:   Dinh Nguyen <dinguyen@...nel.org>
To:     netdev@...r.kernel.org
Cc:     dinguyen@...nel.org, davem@...emloft.net, joabreu@...opsys.com,
        alexandre.torgue@...com, peppe.cavallaro@...com,
        linux-kernel@...r.kernel.org
Subject: [PATCH] net: stmmac: socfpga: add additional ocp reset line for Stratix10

The Stratix10 platform has an additional reset line, OCP(Open Core Protocol),
that also needs to get deasserted for the stmmac ethernet controller to work.
Thus we need to update the Kconfig to include ARCH_STRATIX10 in order to build
dwmac-socfpga.

Also, remove the redundant check for the reset controller pointer. The
reset driver already checks for the pointer and returns 0 if the pointer
is NULL.

Signed-off-by: Dinh Nguyen <dinguyen@...nel.org>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig         |  2 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 18 ++++++++++++++----
 2 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index cb5b0f5..edf2036 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -111,7 +111,7 @@ config DWMAC_ROCKCHIP
 config DWMAC_SOCFPGA
 	tristate "SOCFPGA dwmac support"
 	default ARCH_SOCFPGA
-	depends on OF && (ARCH_SOCFPGA || COMPILE_TEST)
+	depends on OF && (ARCH_SOCFPGA || ARCH_STRATIX10 || COMPILE_TEST)
 	select MFD_SYSCON
 	help
 	  Support for ethernet controller on Altera SOCFPGA
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 6e35957..5b3b06a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -55,6 +55,7 @@ struct socfpga_dwmac {
 	struct	device *dev;
 	struct regmap *sys_mgr_base_addr;
 	struct reset_control *stmmac_rst;
+	struct reset_control *stmmac_ocp_rst;
 	void __iomem *splitter_base;
 	bool f2h_ptp_ref_clk;
 	struct tse_pcs pcs;
@@ -262,8 +263,8 @@ static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac)
 		val = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
 
 	/* Assert reset to the enet controller before changing the phy mode */
-	if (dwmac->stmmac_rst)
-		reset_control_assert(dwmac->stmmac_rst);
+	reset_control_assert(dwmac->stmmac_ocp_rst);
+	reset_control_assert(dwmac->stmmac_rst);
 
 	regmap_read(sys_mgr_base_addr, reg_offset, &ctrl);
 	ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift);
@@ -288,8 +289,8 @@ static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac)
 	/* Deassert reset for the phy configuration to be sampled by
 	 * the enet controller, and operation to start in requested mode
 	 */
-	if (dwmac->stmmac_rst)
-		reset_control_deassert(dwmac->stmmac_rst);
+	reset_control_deassert(dwmac->stmmac_ocp_rst);
+	reset_control_deassert(dwmac->stmmac_rst);
 	if (phymode == PHY_INTERFACE_MODE_SGMII) {
 		if (tse_pcs_init(dwmac->pcs.tse_pcs_base, &dwmac->pcs) != 0) {
 			dev_err(dwmac->dev, "Unable to initialize TSE PCS");
@@ -324,6 +325,15 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
 		goto err_remove_config_dt;
 	}
 
+	dwmac->stmmac_ocp_rst = devm_reset_control_get_optional(dev, "stmmaceth-ocp");
+	if (IS_ERR(dwmac->stmmac_ocp_rst)) {
+		ret = PTR_ERR(dwmac->stmmac_ocp_rst);
+		dev_err(dev, "error getting reset control of ocp %d\n", ret);
+		goto err_remove_config_dt;
+	}
+
+	reset_control_deassert(dwmac->stmmac_ocp_rst);
+
 	ret = socfpga_dwmac_parse_data(dwmac, dev);
 	if (ret) {
 		dev_err(dev, "Unable to parse OF data\n");
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ