netdev - [PATCH 1/4] net: lan78xx: Allow for VLAN headers in timeout calcs

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <e29724693c221289225c7c134a3afc3244cc73d2.1529935234.git.dave.stevenson@raspberrypi.org>
Date:   Mon, 25 Jun 2018 15:07:12 +0100
From:   Dave Stevenson <dave.stevenson@...pberrypi.org>
To:     woojung.huh@...rochip.com, UNGLinuxDriver@...rochip.com,
        davem@...emloft.net, netdev@...r.kernel.org
Cc:     Dave Stevenson <dave.stevenson@...pberrypi.org>
Subject: [PATCH 1/4] net: lan78xx: Allow for VLAN headers in timeout calcs

The frame abort timeout being set by lan78xx_set_rx_max_frame_length
didn't account for any VLAN headers, resulting in very low
throughput if used with tagged VLANs.

Use VLAN_ETH_HLEN instead of ETH_HLEN to correct for this.

Signed-off-by: Dave Stevenson <dave.stevenson@...pberrypi.org>
---
 drivers/net/usb/lan78xx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index a89570f..2f793d4 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c
@@ -2298,7 +2298,7 @@ static int lan78xx_change_mtu(struct net_device *netdev, int new_mtu)
 	if ((ll_mtu % dev->maxpacket) == 0)
 		return -EDOM;
 
-	ret = lan78xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN);
+	ret = lan78xx_set_rx_max_frame_length(dev, new_mtu + VLAN_ETH_HLEN);
 
 	netdev->mtu = new_mtu;
 
@@ -2587,7 +2587,8 @@ static int lan78xx_reset(struct lan78xx_net *dev)
 	buf |= FCT_TX_CTL_EN_;
 	ret = lan78xx_write_reg(dev, FCT_TX_CTL, buf);
 
-	ret = lan78xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN);
+	ret = lan78xx_set_rx_max_frame_length(dev,
+					      dev->net->mtu + VLAN_ETH_HLEN);
 
 	ret = lan78xx_read_reg(dev, MAC_RX, &buf);
 	buf |= MAC_RX_RXEN_;
-- 
2.7.4