| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20180625074818.17073-7-idosch@mellanox.com>
Date: Mon, 25 Jun 2018 10:48:18 +0300
From: Ido Schimmel <idosch@...lanox.com>
To: netdev@...r.kernel.org
Cc: davem@...emloft.net, jiri@...lanox.com, petrm@...lanox.com,
mlxsw@...lanox.com, Ido Schimmel <idosch@...lanox.com>
Subject: [PATCH net-next 6/6] selftests: forwarding: Test routed bridge interface
From: Petr Machata <petrm@...lanox.com>
Add test for cases where bridge itself acts as a router interface, with
front panel port attached to the bridge in question.
In the first test (router_bridge.sh), VLAN memberships are not
configured in any way, and everything uses default PVID of 1. Thus
traffic in $h1 and $h2 is untagged. This test ensures that the previous
patches didn't break a currently working scenario.
In the second test (router_bridge_vlan.sh), a VLAN 555 pvid untagged is
added to the bridge CPU port, with that VLAN leaving the bridge tagged
through its sole member port. The traffic is therefore expected to come
out tagged at $h1. This tests the fix introduced in the previous
patches.
Signed-off-by: Petr Machata <petrm@...lanox.com>
Signed-off-by: Ido Schimmel <idosch@...lanox.com>
---
.../selftests/net/forwarding/router_bridge.sh | 113 ++++++++++++++++++
.../selftests/net/forwarding/router_bridge_vlan.sh | 132 +++++++++++++++++++++
2 files changed, 245 insertions(+)
create mode 100755 tools/testing/selftests/net/forwarding/router_bridge.sh
create mode 100755 tools/testing/selftests/net/forwarding/router_bridge_vlan.sh
diff --git a/tools/testing/selftests/net/forwarding/router_bridge.sh b/tools/testing/selftests/net/forwarding/router_bridge.sh
new file mode 100755
index 000000000000..ebc596a272f7
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_bridge.sh
@@ -0,0 +1,113 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+ ping_ipv4
+ ping_ipv6
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+ simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+ ip -4 route add 192.0.2.128/28 vrf v$h1 nexthop via 192.0.2.2
+ ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+ ip -6 route del 2001:db8:2::/64 vrf v$h1
+ ip -4 route del 192.0.2.128/28 vrf v$h1
+ simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h2_create()
+{
+ simple_if_init $h2 192.0.2.130/28 2001:db8:2::2/64
+ ip -4 route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.129
+ ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+ ip -6 route del 2001:db8:1::/64 vrf v$h2
+ ip -4 route del 192.0.2.0/28 vrf v$h2
+ simple_if_fini $h2 192.0.2.130/28 2001:db8:2::2/64
+}
+
+router_create()
+{
+ ip link add name br1 type bridge vlan_filtering 1
+ ip link set dev br1 up
+
+ ip link set dev $swp1 master br1
+ ip link set dev $swp1 up
+ __addr_add_del br1 add 192.0.2.2/28 2001:db8:1::2/64
+
+ ip link set dev $swp2 up
+ __addr_add_del $swp2 add 192.0.2.129/28 2001:db8:2::1/64
+}
+
+router_destroy()
+{
+ __addr_add_del $swp2 del 192.0.2.129/28 2001:db8:2::1/64
+ ip link set dev $swp2 down
+
+ __addr_add_del br1 del 192.0.2.2/28 2001:db8:1::2/64
+ ip link set dev $swp1 down
+ ip link set dev $swp1 nomaster
+
+ ip link del dev br1
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ swp1=${NETIFS[p2]}
+
+ swp2=${NETIFS[p3]}
+ h2=${NETIFS[p4]}
+
+ vrf_prepare
+
+ h1_create
+ h2_create
+
+ router_create
+
+ forwarding_enable
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ forwarding_restore
+
+ router_destroy
+
+ h2_destroy
+ h1_destroy
+
+ vrf_cleanup
+}
+
+ping_ipv4()
+{
+ ping_test $h1 192.0.2.130
+}
+
+ping_ipv6()
+{
+ ping6_test $h1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh b/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh
new file mode 100755
index 000000000000..fef88eb4b873
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh
@@ -0,0 +1,132 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+ ping_ipv4
+ ping_ipv6
+ vlan
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+ simple_if_init $h1
+ vlan_create $h1 555 v$h1 192.0.2.1/28 2001:db8:1::1/64
+ ip -4 route add 192.0.2.128/28 vrf v$h1 nexthop via 192.0.2.2
+ ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+ ip -6 route del 2001:db8:2::/64 vrf v$h1
+ ip -4 route del 192.0.2.128/28 vrf v$h1
+ vlan_destroy $h1 555
+ simple_if_fini $h1
+}
+
+h2_create()
+{
+ simple_if_init $h2 192.0.2.130/28 2001:db8:2::2/64
+ ip -4 route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.129
+ ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+ ip -6 route del 2001:db8:1::/64 vrf v$h2
+ ip -4 route del 192.0.2.0/28 vrf v$h2
+ simple_if_fini $h2 192.0.2.130/28
+}
+
+router_create()
+{
+ ip link add name br1 type bridge vlan_filtering 1
+ ip link set dev br1 up
+
+ ip link set dev $swp1 master br1
+ ip link set dev $swp1 up
+
+ bridge vlan add dev br1 vid 555 self pvid untagged
+ bridge vlan add dev $swp1 vid 555
+
+ __addr_add_del br1 add 192.0.2.2/28 2001:db8:1::2/64
+
+ ip link set dev $swp2 up
+ __addr_add_del $swp2 add 192.0.2.129/28 2001:db8:2::1/64
+}
+
+router_destroy()
+{
+ __addr_add_del $swp2 del 192.0.2.129/28 2001:db8:2::1/64
+ ip link set dev $swp2 down
+
+ __addr_add_del br1 del 192.0.2.2/28 2001:db8:1::2/64
+ ip link set dev $swp1 down
+ ip link set dev $swp1 nomaster
+
+ ip link del dev br1
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ swp1=${NETIFS[p2]}
+
+ swp2=${NETIFS[p3]}
+ h2=${NETIFS[p4]}
+
+ vrf_prepare
+
+ h1_create
+ h2_create
+
+ router_create
+
+ forwarding_enable
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ forwarding_restore
+
+ router_destroy
+
+ h2_destroy
+ h1_destroy
+
+ vrf_cleanup
+}
+
+vlan()
+{
+ RET=0
+
+ bridge vlan add dev br1 vid 333 self
+ check_err $? "Can't add a non-PVID VLAN"
+ bridge vlan del dev br1 vid 333 self
+ check_err $? "Can't remove a non-PVID VLAN"
+
+ log_test "vlan"
+}
+
+ping_ipv4()
+{
+ ping_test $h1 192.0.2.130
+}
+
+ping_ipv6()
+{
+ ping6_test $h1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
--
2.14.4
Powered by blists - more mailing lists