lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1530188811-8918-3-git-send-email-madalin.bucur@nxp.com>
Date:   Thu, 28 Jun 2018 15:26:51 +0300
From:   Madalin Bucur <madalin.bucur@....com>
To:     davem@...emloft.net, netdev@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org, Madalin Bucur <madalin.bucur@....com>
Subject: [net 2/2] dpaa_eth: DPAA SGT needs to be 256B

The DPAA HW requires that at least 256 bytes from the start of the
first scatter-gather table entry are allocated and accessible. The
hardware reads the maximum size the table can have in one access,
thus requiring that the allocation and mapping to be done for the
maximum size of 256B even if there is a smaller number of entries
in the table.

Signed-off-by: Madalin Bucur <madalin.bucur@....com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 52f4a6b..65a22cd 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -125,6 +125,9 @@ MODULE_PARM_DESC(tx_timeout, "The Tx timeout in ms");
 /* Default alignment for start of data in an Rx FD */
 #define DPAA_FD_DATA_ALIGNMENT  16
 
+/* The DPAA requires 256 bytes reserved and mapped for the SGT */
+#define DPAA_SGT_SIZE 256
+
 /* Values for the L3R field of the FM Parse Results
  */
 /* L3 Type field: First IP Present IPv4 */
@@ -1631,8 +1634,8 @@ static struct sk_buff *dpaa_cleanup_tx_fd(const struct dpaa_priv *priv,
 
 	if (unlikely(qm_fd_get_format(fd) == qm_fd_sg)) {
 		nr_frags = skb_shinfo(skb)->nr_frags;
-		dma_unmap_single(dev, addr, qm_fd_get_offset(fd) +
-				 sizeof(struct qm_sg_entry) * (1 + nr_frags),
+		dma_unmap_single(dev, addr,
+				 qm_fd_get_offset(fd) + DPAA_SGT_SIZE,
 				 dma_dir);
 
 		/* The sgt buffer has been allocated with netdev_alloc_frag(),
@@ -1917,8 +1920,7 @@ static int skb_to_sg_fd(struct dpaa_priv *priv,
 	void *sgt_buf;
 
 	/* get a page frag to store the SGTable */
-	sz = SKB_DATA_ALIGN(priv->tx_headroom +
-		sizeof(struct qm_sg_entry) * (1 + nr_frags));
+	sz = SKB_DATA_ALIGN(priv->tx_headroom + DPAA_SGT_SIZE);
 	sgt_buf = netdev_alloc_frag(sz);
 	if (unlikely(!sgt_buf)) {
 		netdev_err(net_dev, "netdev_alloc_frag() failed for size %d\n",
@@ -1986,9 +1988,8 @@ static int skb_to_sg_fd(struct dpaa_priv *priv,
 	skbh = (struct sk_buff **)buffer_start;
 	*skbh = skb;
 
-	addr = dma_map_single(dev, buffer_start, priv->tx_headroom +
-			      sizeof(struct qm_sg_entry) * (1 + nr_frags),
-			      dma_dir);
+	addr = dma_map_single(dev, buffer_start,
+			      priv->tx_headroom + DPAA_SGT_SIZE, dma_dir);
 	if (unlikely(dma_mapping_error(dev, addr))) {
 		dev_err(dev, "DMA mapping failed");
 		err = -EINVAL;
-- 
2.1.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ