lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Thu, 28 Jun 2018 14:50:52 -0700
From:   Saeed Mahameed <saeedm@...lanox.com>
To:     "David S. Miller" <davem@...emloft.net>
Cc:     netdev@...r.kernel.org, Or Gerlitz <ogerlitz@...lanox.com>,
        Boris Pismenny <borisp@...lanox.com>,
        Yossi Kuperman <yossiku@...lanox.com>,
        Saeed Mahameed <saeedm@...lanox.com>
Subject: [net-next 01/12] net/mlx5e: Add UDP GSO support

From: Boris Pismenny <borisp@...lanox.com>

This patch enables UDP GSO support. We enable this by using two WQEs
the first is a UDP LSO WQE for all segments with equal length, and the
second is for the last segment in case it has different length.
Due to HW limitation, before sending, we must adjust the packet length fields.

We measure performance between two Intel(R) Xeon(R) CPU E5-2643 v2 @3.50GHz
machines connected back-to-back with Connectx4-Lx (40Gbps) NICs.
We compare single stream UDP, UDP GSO and UDP GSO with offload.
Performance:
		| MSS (bytes)	| Throughput (Gbps)	| CPU utilization (%)
UDP GSO offload	| 1472		| 35.6			| 8%
UDP GSO 	| 1472		| 25.5			| 17%
UDP 		| 1472		| 10.2			| 17%
UDP GSO offload	| 1024		| 35.6			| 8%
UDP GSO		| 1024		| 19.2			| 17%
UDP 		| 1024		| 5.7			| 17%
UDP GSO offload	| 512		| 33.8			| 16%
UDP GSO		| 512		| 10.4			| 17%
UDP 		| 512		| 3.5			| 17%

Signed-off-by: Boris Pismenny <borisp@...lanox.com>
Signed-off-by: Yossi Kuperman <yossiku@...lanox.com>
Signed-off-by: Saeed Mahameed <saeedm@...lanox.com>
---
 .../net/ethernet/mellanox/mlx5/core/Makefile  |   4 +-
 .../mellanox/mlx5/core/en_accel/en_accel.h    |  11 +-
 .../mellanox/mlx5/core/en_accel/rxtx.c        | 108 ++++++++++++++++++
 .../mellanox/mlx5/core/en_accel/rxtx.h        |  14 +++
 .../net/ethernet/mellanox/mlx5/core/en_main.c |   3 +
 .../net/ethernet/mellanox/mlx5/core/en_tx.c   |   8 +-
 6 files changed, 139 insertions(+), 9 deletions(-)
 create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.c
 create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.h

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
index 9efbf193ad5a..d923f2f58608 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/Makefile
+++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile
@@ -14,8 +14,8 @@ mlx5_core-$(CONFIG_MLX5_FPGA) += fpga/cmd.o fpga/core.o fpga/conn.o fpga/sdk.o \
 		fpga/ipsec.o fpga/tls.o
 
 mlx5_core-$(CONFIG_MLX5_CORE_EN) += en_main.o en_common.o en_fs.o en_ethtool.o \
-		en_tx.o en_rx.o en_dim.o en_txrx.o en_stats.o vxlan.o \
-		en_arfs.o en_fs_ethtool.o en_selftest.o en/port.o
+		en_tx.o en_rx.o en_dim.o en_txrx.o en_accel/rxtx.o en_stats.o  \
+		vxlan.o en_arfs.o en_fs_ethtool.o en_selftest.o en/port.o
 
 mlx5_core-$(CONFIG_MLX5_MPFS) += lib/mpfs.o
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h
index f20074dbef32..39a5d13ba459 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/en_accel.h
@@ -34,12 +34,11 @@
 #ifndef __MLX5E_EN_ACCEL_H__
 #define __MLX5E_EN_ACCEL_H__
 
-#ifdef CONFIG_MLX5_ACCEL
-
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
 #include "en_accel/ipsec_rxtx.h"
 #include "en_accel/tls_rxtx.h"
+#include "en_accel/rxtx.h"
 #include "en.h"
 
 static inline struct sk_buff *mlx5e_accel_handle_tx(struct sk_buff *skb,
@@ -64,9 +63,13 @@ static inline struct sk_buff *mlx5e_accel_handle_tx(struct sk_buff *skb,
 	}
 #endif
 
+	if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4) {
+		skb = mlx5e_udp_gso_handle_tx_skb(dev, sq, skb, wqe, pi);
+		if (unlikely(!skb))
+			return NULL;
+	}
+
 	return skb;
 }
 
-#endif /* CONFIG_MLX5_ACCEL */
-
 #endif /* __MLX5E_EN_ACCEL_H__ */
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.c
new file mode 100644
index 000000000000..4bb1f3b12b96
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.c
@@ -0,0 +1,108 @@
+#include "en_accel/rxtx.h"
+
+static void mlx5e_udp_gso_prepare_last_skb(struct sk_buff *skb,
+					   struct sk_buff *nskb,
+					   int remaining)
+{
+	int bytes_needed = remaining, remaining_headlen, remaining_page_offset;
+	int headlen = skb_transport_offset(skb) + sizeof(struct udphdr);
+	int payload_len = remaining + sizeof(struct udphdr);
+	int k = 0, i, j;
+
+	skb_copy_bits(skb, 0, nskb->data, headlen);
+	nskb->dev = skb->dev;
+	skb_reset_mac_header(nskb);
+	skb_set_network_header(nskb, skb_network_offset(skb));
+	skb_set_transport_header(nskb, skb_transport_offset(skb));
+	skb_set_tail_pointer(nskb, headlen);
+
+	/* How many frags do we need? */
+	for (i = skb_shinfo(skb)->nr_frags - 1; i >= 0; i--) {
+		bytes_needed -= skb_frag_size(&skb_shinfo(skb)->frags[i]);
+		k++;
+		if (bytes_needed <= 0)
+			break;
+	}
+
+	/* Fill the first frag and split it if necessary */
+	j = skb_shinfo(skb)->nr_frags - k;
+	remaining_page_offset = -bytes_needed;
+	skb_fill_page_desc(nskb, 0,
+			   skb_shinfo(skb)->frags[j].page.p,
+			   skb_shinfo(skb)->frags[j].page_offset + remaining_page_offset,
+			   skb_shinfo(skb)->frags[j].size - remaining_page_offset);
+
+	skb_frag_ref(skb, j);
+
+	/* Fill the rest of the frags */
+	for (i = 1; i < k; i++) {
+		j = skb_shinfo(skb)->nr_frags - k + i;
+
+		skb_fill_page_desc(nskb, i,
+				   skb_shinfo(skb)->frags[j].page.p,
+				   skb_shinfo(skb)->frags[j].page_offset,
+				   skb_shinfo(skb)->frags[j].size);
+		skb_frag_ref(skb, j);
+	}
+	skb_shinfo(nskb)->nr_frags = k;
+
+	remaining_headlen = remaining - skb->data_len;
+
+	/* headlen contains remaining data? */
+	if (remaining_headlen > 0)
+		skb_copy_bits(skb, skb->len - remaining, nskb->data + headlen,
+			      remaining_headlen);
+	nskb->len = remaining + headlen;
+	nskb->data_len =  payload_len - sizeof(struct udphdr) +
+		max_t(int, 0, remaining_headlen);
+	nskb->protocol = skb->protocol;
+	if (nskb->protocol == htons(ETH_P_IP)) {
+		ip_hdr(nskb)->id = htons(ntohs(ip_hdr(nskb)->id) +
+					 skb_shinfo(skb)->gso_segs);
+		ip_hdr(nskb)->tot_len =
+			htons(payload_len + sizeof(struct iphdr));
+	} else {
+		ipv6_hdr(nskb)->payload_len = htons(payload_len);
+	}
+	udp_hdr(nskb)->len = htons(payload_len);
+	skb_shinfo(nskb)->gso_size = 0;
+	nskb->ip_summed = skb->ip_summed;
+	nskb->csum_start = skb->csum_start;
+	nskb->csum_offset = skb->csum_offset;
+	nskb->queue_mapping = skb->queue_mapping;
+}
+
+/* might send skbs and update wqe and pi */
+struct sk_buff *mlx5e_udp_gso_handle_tx_skb(struct net_device *netdev,
+					    struct mlx5e_txqsq *sq,
+					    struct sk_buff *skb,
+					    struct mlx5e_tx_wqe **wqe,
+					    u16 *pi)
+{
+	int payload_len = skb_shinfo(skb)->gso_size + sizeof(struct udphdr);
+	int headlen = skb_transport_offset(skb) + sizeof(struct udphdr);
+	int remaining = (skb->len - headlen) % skb_shinfo(skb)->gso_size;
+	struct sk_buff *nskb;
+
+	if (skb->protocol == htons(ETH_P_IP))
+		ip_hdr(skb)->tot_len = htons(payload_len + sizeof(struct iphdr));
+	else
+		ipv6_hdr(skb)->payload_len = htons(payload_len);
+	udp_hdr(skb)->len = htons(payload_len);
+	if (!remaining)
+		return skb;
+
+	nskb = alloc_skb(max_t(int, headlen, headlen + remaining - skb->data_len), GFP_ATOMIC);
+	if (unlikely(!nskb)) {
+		sq->stats->dropped++;
+		return NULL;
+	}
+
+	mlx5e_udp_gso_prepare_last_skb(skb, nskb, remaining);
+
+	skb_shinfo(skb)->gso_segs--;
+	pskb_trim(skb, skb->len - remaining);
+	mlx5e_sq_xmit(sq, skb, *wqe, *pi);
+	mlx5e_sq_fetch_wqe(sq, wqe, pi);
+	return nskb;
+}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.h b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.h
new file mode 100644
index 000000000000..ed42699a78b3
--- /dev/null
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/rxtx.h
@@ -0,0 +1,14 @@
+
+#ifndef __MLX5E_EN_ACCEL_RX_TX_H__
+#define __MLX5E_EN_ACCEL_RX_TX_H__
+
+#include <linux/skbuff.h>
+#include "en.h"
+
+struct sk_buff *mlx5e_udp_gso_handle_tx_skb(struct net_device *netdev,
+					    struct mlx5e_txqsq *sq,
+					    struct sk_buff *skb,
+					    struct mlx5e_tx_wqe **wqe,
+					    u16 *pi);
+
+#endif
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 134f20a182b5..e2ef68b1daa2 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -4592,6 +4592,9 @@ static void mlx5e_build_nic_netdev(struct net_device *netdev)
 	netdev->features         |= NETIF_F_HIGHDMA;
 	netdev->features         |= NETIF_F_HW_VLAN_STAG_FILTER;
 
+	netdev->features         |= NETIF_F_GSO_UDP_L4;
+	netdev->hw_features      |= NETIF_F_GSO_UDP_L4;
+
 	netdev->priv_flags       |= IFF_UNICAST_FLT;
 
 	mlx5e_set_netdev_dev_addr(netdev);
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
index f29deb44bf3b..f450d9ca31fb 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c
@@ -228,7 +228,10 @@ mlx5e_tx_get_gso_ihs(struct mlx5e_txqsq *sq, struct sk_buff *skb)
 		stats->tso_inner_packets++;
 		stats->tso_inner_bytes += skb->len - ihs;
 	} else {
-		ihs = skb_transport_offset(skb) + tcp_hdrlen(skb);
+		if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4)
+			ihs = skb_transport_offset(skb) + sizeof(struct udphdr);
+		else
+			ihs = skb_transport_offset(skb) + tcp_hdrlen(skb);
 		stats->tso_packets++;
 		stats->tso_bytes += skb->len - ihs;
 	}
@@ -443,12 +446,11 @@ netdev_tx_t mlx5e_xmit(struct sk_buff *skb, struct net_device *dev)
 	sq = priv->txq2sq[skb_get_queue_mapping(skb)];
 	mlx5e_sq_fetch_wqe(sq, &wqe, &pi);
 
-#ifdef CONFIG_MLX5_ACCEL
 	/* might send skbs and update wqe and pi */
 	skb = mlx5e_accel_handle_tx(skb, sq, dev, &wqe, &pi);
 	if (unlikely(!skb))
 		return NETDEV_TX_OK;
-#endif
+
 	return mlx5e_sq_xmit(sq, skb, wqe, pi);
 }
 
-- 
2.17.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ