[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180629154502.GG11285@lunn.ch>
Date: Fri, 29 Jun 2018 17:45:02 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Dan Murphy <dmurphy@...com>
Cc: f.fainelli@...il.com, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next v2 1/2] net: phy: DP83TC811: Add INT_STAT3
On Fri, Jun 29, 2018 at 10:35:45AM -0500, Dan Murphy wrote:
> Add INT_STAT3 interrupt setting and clearing
> support.
>
> Signed-off-by: Dan Murphy <dmurphy@...com>
> ---
>
> v2 - Removed bug fix removal of writing INT_STAT1 twice when disabling interrupts
>
> drivers/net/phy/dp83tc811.c | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/drivers/net/phy/dp83tc811.c b/drivers/net/phy/dp83tc811.c
> index 49ac678eb2dc..f8653f5d8789 100644
> --- a/drivers/net/phy/dp83tc811.c
> +++ b/drivers/net/phy/dp83tc811.c
> @@ -21,6 +21,7 @@
> #define MII_DP83811_SGMII_CTRL 0x09
> #define MII_DP83811_INT_STAT1 0x12
> #define MII_DP83811_INT_STAT2 0x13
> +#define MII_DP83811_INT_STAT3 0x18
> #define MII_DP83811_RESET_CTRL 0x1f
>
> #define DP83811_HW_RESET BIT(15)
> @@ -44,6 +45,11 @@
> #define DP83811_OVERVOLTAGE_INT_EN BIT(6)
> #define DP83811_UNDERVOLTAGE_INT_EN BIT(7)
>
> +/* INT_STAT3 bits */
> +#define DP83811_LPS_INT_EN BIT(0)
> +#define DP83811_NO_FRAME_INT_EN BIT(3)
> +#define DP83811_POR_DONE_INT_EN BIT(4)
> +
> #define MII_DP83811_RXSOP1 0x04a5
> #define MII_DP83811_RXSOP2 0x04a6
> #define MII_DP83811_RXSOP3 0x04a7
> @@ -81,6 +87,10 @@ static int dp83811_ack_interrupt(struct phy_device *phydev)
> if (err < 0)
> return err;
>
> + err = phy_read(phydev, MII_DP83811_INT_STAT3);
> + if (err < 0)
> + return err;
> +
> return 0;
> }
>
> @@ -216,6 +226,18 @@ static int dp83811_config_intr(struct phy_device *phydev)
> DP83811_UNDERVOLTAGE_INT_EN);
>
> err = phy_write(phydev, MII_DP83811_INT_STAT2, misr_status);
Hi Dan
Isn't this going to fail to apply because net-next says STAT1 here?
That is why i said you need to wait for David to merge net into
net-next. Then you can submit these patches, and not have conflicts.
Andrew
Powered by blists - more mailing lists